How to load and unload a Mamiya RB67 back/film magazine, tutorial for medium format film backs

แชร์
ฝัง
  • เผยแพร่เมื่อ 15 ก.ย. 2024

ความคิดเห็น • 42

  • @gedcowburn2371
    @gedcowburn2371 4 หลายเดือนก่อน +3

    Last week I was given an RB67 and I haven't used a film camera for over 30 years. Many, many thanks for this video. You have saved me from making some costly errors!

    • @valentinsfotoparadies8708
      @valentinsfotoparadies8708  4 หลายเดือนก่อน +1

      Hi there,
      thank you for your kind words! Happy to hear that you got your hands on such a wonderful piece of equipment! Enjoy your RB67.
      All the best,
      Valentin

  • @gryphon.halley
    @gryphon.halley 2 ปีที่แล้ว +1

    Hey man! This was really helpful and straight to the point. Appreciate it!

    • @valentinsfotoparadies8708
      @valentinsfotoparadies8708  2 ปีที่แล้ว

      Hello Gryphon, thanks for your kind words. This is literally what I do it for. I had to everything myself so I though I might as well share it in a compact, understandable way 🙂
      Have a good day!

  • @vincecarnevale4406
    @vincecarnevale4406 2 หลายเดือนก่อน +2

    If I remember correctly, some of. the Grayflex roll film backs will fit the RB 67.

  • @cameronfong9283
    @cameronfong9283 2 ปีที่แล้ว +1

    Hi thank you for the video it was really helpful!
    I had a question about the red dot near the film advance lever? What does it do?
    Thank you!

    • @valentinsfotoparadies8708
      @valentinsfotoparadies8708  2 ปีที่แล้ว

      Hi Cameron, thank you for your comment! To my knowledge, the red dot needs to be visible in order to be able to take a photo!
      All the best,
      V

  • @highway65
    @highway65 5 หลายเดือนก่อน

    Thank you for giving the confidence in attacking this beast !!

  • @sancheezy9584
    @sancheezy9584 ปีที่แล้ว

    Perfect video!! Thank you so much!

  • @dantan357
    @dantan357 ปีที่แล้ว +1

    hello thanks you for video I have 120/220 manual film back I also have red dot on leaver when loading and getting to from S to 1 should the red dot be exposed I,m having trouble loading 220 film seems like counter is not going to 1 stays on S

    • @valentinsfotoparadies8708
      @valentinsfotoparadies8708  ปีที่แล้ว

      Hey man, thanks for your comment! Can you reformulate the question? I do not really understand what you are trying to ask... all the best, Valentin

  • @danielybarra
    @danielybarra 2 หลายเดือนก่อน +1

    When I get to the end of the roll and I continue to crank after 10, it gets stuck. I tried moving the little tab under the count window, rotating the back, flipping the multiple exposure lever, removing and reinserting the dark slide, and a combination of all these things. I ended up opening up the film back in a dark room just to be safe. Has happened twice consecutively. The roll was wrapped properly both times but from what you show in the video, and as I have experienced before, the film advance lever should crank with very little resistance after the film has completely moved to the take up spool. Any idea what is going on? I only found one mention of this on forums and no one provided an answer that I didn’t try above.

    • @valentinsfotoparadies8708
      @valentinsfotoparadies8708  2 หลายเดือนก่อน

      Hi Daniel,
      thanks for your comment! Unfortunately I have never heard of this problem before. It sounds like you might want to send the back to a repair person and ask them for some insight? That's what I always try to do when I have no more options left.
      All the best and good luck,
      V

  • @highway65
    @highway65 4 หลายเดือนก่อน +1

    Do you have to insert the dark slide every time you advance the film ?

  • @magic8bit509
    @magic8bit509 3 หลายเดือนก่อน

    Great video ! thank you very much !

  • @jimcook3882
    @jimcook3882 2 ปีที่แล้ว +1

    I have the same Pro-S film backs and would you please explain the USE of the RED DOT? Should it be covered by the switch for normal shooting or uncovered??? Thank you!

    • @valentinsfotoparadies8708
      @valentinsfotoparadies8708  2 ปีที่แล้ว

      Hi Jim, thanks for your question! The red dot needs to be visible in order to take a photo!
      All the best and have fun shooting,
      Valentin

    • @cloudedfilms
      @cloudedfilms ปีที่แล้ว

      @@valentinsfotoparadies8708 not it doesn’t, that’s multiple exposure mode if i remember correctly

    • @valentinsfotoparadies8708
      @valentinsfotoparadies8708  ปีที่แล้ว

      @@cloudedfilms I don't think so. You can always take multiple exposures with the RB67...

    • @playerjohn0
      @playerjohn0 ปีที่แล้ว +1

      Red dot means multi-exposure, if the red dot is appearing means you can take multiple shots at the same photo and multi-expose the shot. If the red-dot is covered and your camera has no defects on that mechanism the camera wont allow you to take the 2 exposure on the part of the film. Its a way of saving photographers from double exposing by mistake.

  • @helmutrudelitz1866
    @helmutrudelitz1866 2 ปีที่แล้ว +1

    Hallo Valentin,
    welche Bedeutung hat der kleine Hebel auf der rechten Seite des Weiterspul-Hebels ?
    Gruß Helmut

    • @valentinsfotoparadies8708
      @valentinsfotoparadies8708  2 ปีที่แล้ว

      Hallo Helmut,
      Der Hebel muss sich in der richtigen Position befinden um eine Aufnahme machen zu können.
      Lg
      Valentin

  • @merryharry6487
    @merryharry6487 ปีที่แล้ว +2

    So you dont rewind the film you just crank it and make a new roll?

    • @valentinsfotoparadies8708
      @valentinsfotoparadies8708  ปีที่แล้ว +1

      Exactly! You just use the lever over and over again, until the resistance becomes much smaller (you can also listen for the sound of the paper slipping). Then you can open the back and take out the film.
      All the best,
      V

  • @fschapo
    @fschapo ปีที่แล้ว +1

    hello valentins! while loading my last film of 120, i accidentally missed the horizontal arrow and kept loading until i started to see the horizontal arrows on the backing paper. is it possible that this caused the roll to come back completely empty after i sent it to the lab? thanks.

    • @valentinsfotoparadies8708
      @valentinsfotoparadies8708  ปีที่แล้ว

      Hi there, could you explain in a little more detail how far you loaded the film? Normally, I do not think that loading the film incorrectly by a bit would result in a completely blank roll. What would probably happen is that your last one or two frames might not be fully exposed... but I am not 100% sure...

    • @fschapo
      @fschapo ปีที่แล้ว

      @@valentinsfotoparadies8708 hello there! i loaded until i started seeing horizontal arrows and dots (passing the vertical arrow). after that i just closed the back.

  • @joelpaz7858
    @joelpaz7858 ปีที่แล้ว

    Thanks for the explanation of how to load the film because I didn-t know that you aligned the arrow on the film with the arrow on the bottom a the film magazine. On the middle of the top cover, on the back part there is a lever that can be moved to the left and returns to the right again by itself...What is it for.

    • @valentinsfotoparadies8708
      @valentinsfotoparadies8708  ปีที่แล้ว

      Hi Joel,
      thanks for your comment. Unfortunately, I do not know what the lever you referred to is supposed to do. If you find out, let me know:)
      All the best,
      V

    • @scottfrancis8313
      @scottfrancis8313 7 หลายเดือนก่อน

      I believe you are referring to the film "wind stop lever". The manual states.. "When the film advance lever is continuously wound, with the film wind-stop release lever (42) pushed to the left, the film can be reeled up completely to its end, even though picture taking is still in progress and a film remains unexposed."
      Just an easy way to advance to the end of the film if you don't want to expose anymore frames. Probably used a lot more when film was dirt cheap.. lol 😂
      Hope this helps :) @@valentinsfotoparadies8708

  • @mezabarch
    @mezabarch 4 หลายเดือนก่อน

    Thank you!

  • @nathanwaters
    @nathanwaters ปีที่แล้ว

    thank you bro

  • @antonikx_
    @antonikx_ ปีที่แล้ว

    hey dude , i kind of have a problem can you help me?😊

    • @valentinsfotoparadies8708
      @valentinsfotoparadies8708  ปีที่แล้ว

      Sure, what's up?

    • @antonikx_
      @antonikx_ ปีที่แล้ว

      @@valentinsfotoparadies8708 whenver i take a photo the red mark wont appear on my back and i have to use the wind stop release lever to advance the film, any ideea why thats happening?

    • @valentinsfotoparadies8708
      @valentinsfotoparadies8708  ปีที่แล้ว +1

      @@antonikx_ I have no idea why that's happening. I also have a back that does not show the red dot once I take a picture. For my back it only happens in "landscape" mode. What I do then is, I rotate the back to "portrait" and then set the shutter speed to 1/400 and close the aperture fully. Ideally, I put the lens cap on and take a "blank shot". Usually this will bring the red dot back and let me advance the film. Maybe I should get the back serviced, now that I am thinking about it haha.
      All the best,
      V