Sequre D60 the best cheap soldering iron you can get

แชร์
ฝัง
  • เผยแพร่เมื่อ 25 ส.ค. 2020
  • Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: www.fpvknowitall.com/ultimate...
    SUPPORT ME ON PATREON at: bit.ly/2Ep5Sia
    THIS IS MY FULL TIME JOB. Here are other ways that you can support me: www.fpvknowitall.com/support-me/
    ---
    The Sequre D60 is the best cheap soldering iron you can get. Its soldering performance is just as good as the TS100, its bigger brother. But somehow they've got the price down to just $30-$35! The TS100 has more convenience and features but if all you want to do is stick wires to pads, the D60 will get it done.
    -- PRODUCT LINKS --
    I receive a commission (at no extra cost to you) if you make a purchase after clicking one of the affiliate links below.
    Purchase Sequre soldering irons and accessories at:
    * SequreMall - bit.ly/32v3pwV
    * RaceDayQuads - bit.ly/34yZe60
    * GetFPV - bit.ly/3lmVOJJ
    * Banggood - bit.ly/2Qo3XPG
    MANDATORY DISCLAIMER: I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
    Most or all links above are affiliate links, and I will receive compensation if you use them.

ความคิดเห็น • 226

  • @vonn_fpv3414
    @vonn_fpv3414 3 ปีที่แล้ว +45

    I've had this iron for over a couple months, totally recommend it. Its great for the price!

    • @KC-om7cm
      @KC-om7cm 3 ปีที่แล้ว +1

      I have as well.

  • @bvanlaer
    @bvanlaer 3 ปีที่แล้ว +67

    When you power it up it shows the current ambient temperature. That means that you can use it as a thermometer!!! ;)

    • @joshtnewby
      @joshtnewby 3 ปีที่แล้ว +7

      I'm jamming it in the chicken on the grill!😅🤣🤣

    • @hanzalapatel5922
      @hanzalapatel5922 3 ปีที่แล้ว +3

      @@jakekisiel7399 I think you mistook dog for furnace

    • @km_pr
      @km_pr 3 ปีที่แล้ว +1

      Same on the ts100 🙄

    • @DjWangYT
      @DjWangYT 3 ปีที่แล้ว +1

      Yum! I hear lead is great for the body 🤪

    • @drkastenbrot
      @drkastenbrot 3 ปีที่แล้ว +1

      Not really, the thermocouples in these soldering irons are terribly inaccurate

  • @partyfrog69
    @partyfrog69 3 ปีที่แล้ว +1

    These are great, I have used it many, many times repairing and resoldering the Jumper 16.

  • @MCsCreations
    @MCsCreations 3 ปีที่แล้ว +3

    Fantastic! Thanks a lot, Joshua! 😃
    I've been looking for a soldering iron to replace my bench one! This one looks like a big step in the right direction! 😃
    Stay safe there with your family! 🖖😊

  • @sidarthnandanan1056
    @sidarthnandanan1056 3 ปีที่แล้ว +1

    You helped me so much when I got into this hobby thanks Bardwell

  • @zacbarnes9075
    @zacbarnes9075 3 ปีที่แล้ว +1

    I have been rocking this iron for the last few months!! A Great option!

  • @kjj8770
    @kjj8770 3 ปีที่แล้ว +2

    Been running the SQ ts100 clone for a while now, love it!

  • @ruvyfpv4398
    @ruvyfpv4398 3 ปีที่แล้ว +1

    Awesome already order along with the Speedybee and some extra Solder!!! Thanks man!!!👌👌👌👌

  • @jameslaraia
    @jameslaraia 3 ปีที่แล้ว +2

    snagged one of these from RDQ when they were very first listed a few months ago. Best purchase I've made in a long time. It works phenomenally, and I have no complaints.

    • @aleomonoia
      @aleomonoia 3 ปีที่แล้ว

      Can you upgrade the firmware like the sq001 and ts100?

  • @MrChucklos562
    @MrChucklos562 2 ปีที่แล้ว

    just wanted to say thanks for sharing your video and im a rookie starter in solder and to tell you the truth wasnt gonna subscribed but your ending in the video is great and again thanks for the help.

  • @sawatt
    @sawatt 3 ปีที่แล้ว +1

    I like my Sequre D100. Got it from RDQ. It uses the same barrel connector as the TS-100 and comes with the adapter.

  • @joelcollings5620
    @joelcollings5620 ปีที่แล้ว

    Sickk, just orderd 1 of these, glad your reviewing this haha

  • @hateeternalmaver
    @hateeternalmaver 3 ปีที่แล้ว +4

    Thanks Joshua, really appreciate the tips on cheap good stuff.

  • @SequreTech
    @SequreTech 3 ปีที่แล้ว

    Thanks
    for Joshua Bardwell Great review and soldering testing.

  • @MrHristoB
    @MrHristoB 3 ปีที่แล้ว +13

    Back in the days I was repairing TVs with a schematic, a multi-meter(analogue) and a induction soLdering gun. Down to individual transistors, resistors and caps. I've seen people doing a brilliant job with cheap tools and people doing really shitty jobs with very expensive equipment, soLdering irons and other gizmos. I've built my own soldering station from an old PC PSU, 6 euro chinese 12V soldering iron with proper tips, and few other bits and bobs. Got another 230V, 60W (with my own DIY temperature control module) for tough jobs. Built 5 quads with them and other electronics projects, including my own flight controllers. It's all down to skills. The trick is in the quality of solder and flux you're using, and then adapt to it and polish the skill. Practice, practice, practice.. That's it. We're not building a space-crafts here. It's a hobby.

    • @paipaiakapapi3137
      @paipaiakapapi3137 3 ปีที่แล้ว

      Im a beginner, any tips on what products to use and such ?

    • @kaaolin
      @kaaolin 3 ปีที่แล้ว

      How do I make a soldering station from an old psu?

  • @manadrain9561
    @manadrain9561 3 ปีที่แล้ว

    great review. Interesting irons. The end card though, JB been watching some Alton brown.

  • @genefoxgreenmountaindroning
    @genefoxgreenmountaindroning 3 ปีที่แล้ว

    Thanks for the great advice

  • @Bigballvlogs
    @Bigballvlogs 3 ปีที่แล้ว

    Just bought a soldering iron the looks similar but with the screw on tip holder for $16 off Amazon that is digital temp controlled and goes up to 480c. Also came with solder stand tweezers. I could cut the cord and solder in a connector but I have been using a butane iron for out doors

  • @bleeksbentbits3150
    @bleeksbentbits3150 3 ปีที่แล้ว +1

    Every time you attach this particular outro Im immediately reminded of the Tom Waits song "What's he building in there?"...
    Jusst had to share that! :v
    Ive got one of these Sequer soLdering irons in my shopping basket waiting until Im less shitty with BG before I pull the trigger...
    I DID have a TS100- was one of my first purchases in/for the hobby...
    I only used it 2 or 3 times & packed it away to move house only for it to be stolen by the gumby I moved in to board with & now it's gone forever- nearly 100AUD down the gurgler.
    Was originally pointed at the TS100 by Final Glide Aus & been intending to buy another, but after having already bought one & being on a budget I had been putting it off...
    I didnt know about the D100 so will be checking that out instead I think,,,
    Thanks for that JB & all the best

  • @Muddyorphan1812
    @Muddyorphan1812 3 ปีที่แล้ว +2

    i love this thing ive been using one for over a year you can use a lipo or like a computer power plug 100% behind this thing mines blue

  • @ragndroneman
    @ragndroneman 3 ปีที่แล้ว +1

    You are not wrong Joshua! I bought a tinyhawk 2 to avoid building but had to borrow a soldering iron to fix the battery cable back on, ugliest solder ever but it works again!
    Perfect timing for me with this video!
    Have you or can you, do a vid on solder types and flux? What do you use? 👍🤙👍

  • @raffyturc
    @raffyturc 3 ปีที่แล้ว +46

    7-segment display (LED -Light emitting diode).. not LCD
    👍

    • @jvagrusa
      @jvagrusa 3 ปีที่แล้ว +1

      Thought I'd add to this:
      LCD = Liquid Crystal Display , a calculator has one of these

    • @jorgeromero4680
      @jorgeromero4680 3 ปีที่แล้ว +4

      @Mack Premo OMG = Oh My God

    • @dr0n3droid
      @dr0n3droid 3 ปีที่แล้ว +2

      WTF = When Thoughts Form

    • @avasianfpv
      @avasianfpv 3 ปีที่แล้ว +2

      FPV = yessir

    • @km_pr
      @km_pr 3 ปีที่แล้ว +1

      LED display or BCD or 7 segment display...

  • @beechFPV
    @beechFPV 3 ปีที่แล้ว +1

    Look at the sh72 on Banggood. I got one months ago and have always used it on a 4s battery. No issues here. Amazing iron. What’s up quickly as well

  • @licensetodrive9930
    @licensetodrive9930 3 ปีที่แล้ว +10

    TS100-4-Life :)
    I bought one in a Banggood sale at the beginning of this year, literally minutes after I tried using it I went back on Banggood and ordered another whilst it was still on offer. One for home, one for my quad backpack.

    • @ryansainsbury2038
      @ryansainsbury2038 3 ปีที่แล้ว +3

      Best purchase I've ever made was the TS100

    • @licensetodrive9930
      @licensetodrive9930 3 ปีที่แล้ว +2

      ​@@ryansainsbury2038 For about 12 years I've been using one of those big powerbrick+wand irons and it's amazing how easily the TS100 can solder the same heavy gauge wire as that old one.
      The wand of the powerbrick iron died once, simple £10 replacement, I attached the grip of the old wand to an umbrella with a broken handle using custom 3D printed parts :)

    • @RCOverKill
      @RCOverKill 3 ปีที่แล้ว +1

      @@licensetodrive9930 lol, same here, so much smaller, and easier to work with.

    • @ValFPV
      @ValFPV 3 ปีที่แล้ว

      @@licensetodrive9930 I'm wondering if the ts100 can do 10awg wire onto xt90 connectors?

    • @licensetodrive9930
      @licensetodrive9930 3 ปีที่แล้ว

      ​@@ValFPV Personally the largest I've soldered is XT60 and it has no trouble with that. But you can solder XT90s with it, this guy did: th-cam.com/video/OYDeogFmLWI/w-d-xo.html
      Powering it from 20v-24v means it will heat up significantly faster than 12v, good for when soldering things that soak up the heat, and there's a custom firmware that pushes its max temp from 400C to 450C.

  • @wrstew1272
    @wrstew1272 3 ปีที่แล้ว +1

    JB- you don’t have to be the first to review, the honored practical way to test first still is the best. And coming from a trusted source is the way to go, in my humble opinion......... but.....buy once a proper tool and you will soon forget the price, buy a cheap tool and you will beat yourself when you have to replace it because you have saved a couple of bucks. Absolutely from experience of 60+ years of hands on tool work.

  • @sky_fpv7529
    @sky_fpv7529 3 ปีที่แล้ว +3

    Mine literally just got here haha it’s literally in my hands from the mailbox

  • @air-headedaviator1805
    @air-headedaviator1805 3 ปีที่แล้ว +4

    This is a sign from the Lord. I’ve been readying myself to buy a T100 and now something to save on reveals itself!

    • @RCOverKill
      @RCOverKill 3 ปีที่แล้ว +1

      Check out the secure sq-001, either a Ts-100 clone, or same one under a different name, I've tried it, and couldn't tell a difference.

    • @kjj8770
      @kjj8770 3 ปีที่แล้ว

      @@RCOverKill yeah I've got the clone it's great

  • @shadadalhaj7576
    @shadadalhaj7576 2 ปีที่แล้ว

    Good choice 👌 👍 👏

  • @rikujkoivisto
    @rikujkoivisto 3 ปีที่แล้ว

    I`ve been told, that TS-100 and SQ 001 are from same factory. SQ001 is updated, V 2.. Thank you for very nice videos!!

  • @johannvisser9623
    @johannvisser9623 3 ปีที่แล้ว

    The firmware that you can flash is nice for leftys like me.

  • @staticfpv881
    @staticfpv881 3 ปีที่แล้ว

    I like the Sequre SQ-001 it has the same look as the ts100

  • @-Lucky-Six-
    @-Lucky-Six- 3 ปีที่แล้ว +1

    you get my like for saying soldering...soddering sounds very much a specialist adult past time to us in the UK

  • @RCOverKill
    @RCOverKill 3 ปีที่แล้ว +5

    I'm pretty sure the secure sq-001 is the same as the ts-100, a friend bought a secure, and I couldn't find any difference. I started with a soldering station, the Ts 100 is so much nicer to work with, fast heating, precision work.

    • @MarekSzulen
      @MarekSzulen 3 ปีที่แล้ว

      I have sq001 and is the same as ts100, beside the shape of the buttons.

  • @fluoxethine
    @fluoxethine 3 ปีที่แล้ว

    I'm using it with baseus 65w powerbank but I have to use PD 20V trigger (cable or tc66c for example)

  • @gqp4800
    @gqp4800 3 ปีที่แล้ว

    My ts 100 crapped out. Any hack tips. Will get this one.

  • @kevbomb
    @kevbomb 2 ปีที่แล้ว

    I want to buy and use a 1800mah 6S 22.4v battery like the one in video,
    to solder, can this be charged with a regular wall plug adaptor, say 9-12v 2 amp?

  • @rutgervangent2356
    @rutgervangent2356 3 ปีที่แล้ว +2

    I cant heat up my Solding iron when I longpress the A-button, the LED says S-E when I longpress the A-button. Does anyone know how to fix that????

  • @8bitsamurai6
    @8bitsamurai6 3 ปีที่แล้ว

    Thanks I think you just sold me. Was gonna get a cheapo but wanted something decent for keyboards and etc.

  • @erniarrow
    @erniarrow ปีที่แล้ว

    A got electrict current about 10-11 volt in bolt of this solder (all of three bolt show this current, not only the tip). Is it normal or there is something with mine?

  • @WaschyNumber1
    @WaschyNumber1 3 ปีที่แล้ว +1

    Hello,
    How accurate is the led display temperature on the d60 ? 🤔

  • @nidusa1
    @nidusa1 2 ปีที่แล้ว

    for about the same price, I prefer my Pinecil from pine64. pinecil has both usb-c & DC5525 port. allows you to use usb-c port to power from charger, or dc5525 port to connect to a battery. has robust os too. Ralim is active in the pine discord & listens to new features people want, tries to add them to new IronOs he shares freely with community. it's 25+ ship for pinecil & has OLED screen.

  • @forced4ph
    @forced4ph 3 ปีที่แล้ว +1

    The price for this thing is so right. I love mine on 6s.

  • @fredh1201
    @fredh1201 3 ปีที่แล้ว

    Would it be possible to run this soldering iron off a lipo charger, specifically the ISDT 608AC?

  • @Maorifpv
    @Maorifpv 3 ปีที่แล้ว +4

    I use 5 dollars iron and never had problems building quads for almost 5 years :)

    • @k1ortia
      @k1ortia 3 ปีที่แล้ว +1

      Same..got mine from banggood almost 4 years ago. Cost £8 and still rocking out builds..😁

  • @uwtab6898
    @uwtab6898 3 ปีที่แล้ว +1

    Just order for s(ec)ure! Thank you! Been searching for 2 weeks now, to much choice and so much biased opinions.. most of it is nonsens. But I trust you so better i'll get this one 😉 (ps i won't blame you if this one does work okay)

  • @GillesCoomans
    @GillesCoomans 3 ปีที่แล้ว

    No idea if you read comments on older videos but i recomend checking out the pine64 pinecil.
    Dare i say in some ways a straight upgrade for nearly a third of the price

  • @GreyDeathVaccine
    @GreyDeathVaccine 3 ปีที่แล้ว

    SH72 is also great but doesn't have display or any indicator. But costs $12 and heats up very fast.

  • @gus8378
    @gus8378 3 ปีที่แล้ว

    I wonder if you can use this with an ISDT 608 AC, with the DC power mode

  • @bengmo64
    @bengmo64 3 ปีที่แล้ว

    Get that custom firmware for your ts100 it has nice features

  • @gamingwolf7895
    @gamingwolf7895 10 หลายเดือนก่อน

    Is this soldering iron good for lead free solder

  • @sumdood2035
    @sumdood2035 2 ปีที่แล้ว

    Is there a base stand that will work better than the tiny toy piece they include?

  • @jonathangomez4752
    @jonathangomez4752 3 ปีที่แล้ว

    This thing flies amazing on 6s

  • @vladtheinhaler93
    @vladtheinhaler93 3 ปีที่แล้ว

    Low temp setting is for heat shrinking and fixing whoop frames!..

  • @RealKushrage
    @RealKushrage 3 ปีที่แล้ว +1

    Nice thank you thats what I need

  • @nikoelias1201
    @nikoelias1201 3 ปีที่แล้ว +1

    People say that it draws 1.37 amperes no matter of the power supply voltage. So it have about 33w max power. Could you please check It's power consumption at 24 volts?

  • @SevenDeMagnus
    @SevenDeMagnus 3 ปีที่แล้ว

    Cool, can the USB on the iMac power this properly?

  • @Pitt-zr5ig
    @Pitt-zr5ig 3 ปีที่แล้ว

    Recommendation for inexpensive soldering iron to repair crashed drone. Want bench top plug in US NOT portable, Recommendation?? Thx

  • @ratititat-rcflyer5139
    @ratititat-rcflyer5139 3 ปีที่แล้ว

    Talon makes one for $23.00 I like a lot
    Talon T12 DC 12-24V 72W Mini Adjustable Temperature 200-400°C Electric Soldering Iron Welding Tool with T12-BCF2 Tip
    thank you thank you thank you Joshua i would be lost without you

  • @bikemancody2752
    @bikemancody2752 3 ปีที่แล้ว

    Do one on a good power Screwdriver!

  • @Muddyorphan1812
    @Muddyorphan1812 3 ปีที่แล้ว

    do you have a video or someonewho could telll me how to put a split mini or turtle to a 2020stck?

  • @iihhaatteeggmmaaiill
    @iihhaatteeggmmaaiill 3 ปีที่แล้ว

    If you plug your lipo in, will it tell you when it's dead before you kill it?

  • @eoinmolloy2067
    @eoinmolloy2067 3 ปีที่แล้ว +2

    If it's good enough for bardwell then it's perfect for me.

  • @SlipperyBannana
    @SlipperyBannana 3 ปีที่แล้ว

    How would this compare to the cheap AOYUE station? (obv its portable, but for at home tho)

  • @marinehm
    @marinehm 3 ปีที่แล้ว

    I still want a TS100 but you are so right. Those cheap RadioShack or hardware store irons suck so bad! If you do ANY soldering what so ever, invest in a good one and get the job done right. This would be an excellent choice for someone just getting into the hobby. Spend the extra $5.00

  • @FranciscoMartinez-vq6zh
    @FranciscoMartinez-vq6zh 3 ปีที่แล้ว

    You need to check the SH72

  • @michaelb5189
    @michaelb5189 3 ปีที่แล้ว +4

    Someone once told me that the ISDT 608AC was the best first battery charger, he forgot to mention its power supply is perfect for powering these little irons. P.S. The SQ-001 also has a version of stock firmware that goes up to 450C.

    • @aaronw6820
      @aaronw6820 ปีที่แล้ว +1

      Damn mate, your comment is so underrated! I also have both, the Charger and the Iron and I never realized I could use the Powersupply brick of the charger with it :O! Real MVP! I was so annoyed that it needed an extra usb C power supply that i never bought it! just tried out your trick and it works great!
      PS: Joshy should really pin your comment!

    • @Scout339th
      @Scout339th 8 หลายเดือนก่อน

      This needs to be pinned comment! Now I know what charger I'll be upgrading to!

  • @thelaughingman79
    @thelaughingman79 2 ปีที่แล้ว

    Hi do these take the TS100 /001 tips?

  • @box420
    @box420 2 ปีที่แล้ว

    You should check out the pine 64 one it's about 40$ and is usb c

  • @jinchoung
    @jinchoung 3 ปีที่แล้ว

    any links to the d100? when i type in sq d100, i get things like industrial heat sinks....

  • @jesselopezdrones4396
    @jesselopezdrones4396 3 ปีที่แล้ว +1

    They are 29$ on RDQ thru Bardwell’s Link..

  • @h2o-fpv623
    @h2o-fpv623 3 ปีที่แล้ว

    U r so right lol thanks for this video.

  • @Joe_Blo
    @Joe_Blo 3 ปีที่แล้ว +1

    More important than the type of iron are the 3 C's rule of soldering:
    Clean. Clean. Clean.
    Clean the wire and surfaces either mechanically, or chemically, before soldering. Copper wire begins to oxidize as soon as it's manufactured. And continues to do so inside it's insulation, just slower in the absence of air. So always use a dab of liquid flux, even if you've just stripped the insulation, even if it's pre-tinned. A little goes a long way.
    No flux? Simply remove copper oxidation from a board or lug with a pencil eraser.
    Keep flux remover chemicals away from plastic! Even alcohol. Especially MEK.

  • @S4ylas
    @S4ylas 3 ปีที่แล้ว

    Guys, anyone know why it can't work with my baseus 65w qc pd wall charger with 100w usb c pd qc cable? :(

  • @DougEfresh.
    @DougEfresh. 3 ปีที่แล้ว

    Great video. The d100 sounds interesting but I just bought a T-100 for $54 a couple months ago. I wasn't aware that you can change the max temperature though. I think mine only goes to 300. How can I raise that?

  • @mohandmohand2047
    @mohandmohand2047 ปีที่แล้ว

    Is it best than sq-001 soldering iron??!

  • @laing0ian
    @laing0ian 3 ปีที่แล้ว

    Anyone able to use this D60 with a normal USB c dell laptop charger which is capable of outputting 20v 4.5 amps. USB c has functionality to tell the charger what output it can accept this does not seem to do that so you have to use the cord it comes with for lipo's external power supply....

  • @TheMadmacs
    @TheMadmacs 3 ปีที่แล้ว

    sold sir.

  • @slavikarg
    @slavikarg 3 ปีที่แล้ว

    Hi Josh. Any recommendations for soldiering battery aluminum tabs together?

  • @sveisor2
    @sveisor2 3 ปีที่แล้ว

    Such a shame that you cant get replacement shells for the ts100 for any decent price anymore. Mine has cracked everywhere for some reason...

  • @ei3548
    @ei3548 3 ปีที่แล้ว

    Can you mod the 6dbi antenna for the Qx7?

  • @m.s.aviation7065
    @m.s.aviation7065 3 ปีที่แล้ว

    nice

  • @PeterPetermann
    @PeterPetermann 3 ปีที่แล้ว

    ever since I've used my ts100 for the first time, I know I'm not going to go back to one of those thick soldering irons.

  • @zeno6111753
    @zeno6111753 3 ปีที่แล้ว

    Does it have a lipo cut-off?

  • @Adam-oj8hj
    @Adam-oj8hj 3 ปีที่แล้ว

    Hi Joshua, Does your D60B still work?

  • @frankpitochelli6786
    @frankpitochelli6786 2 ปีที่แล้ว

    Absolutely fantastic inventions, the Sequre brands are fantastic, the ts-100 and ts-80 as well as the ksger and Sequre mss-12 are all fabulous.
    Wish they were around 20-25 yrs ago.!!
    Absolutely love them.
    The only portable soldering irons that were available back in the day were the butane powered irons.....
    I won't use anything else unless I need a very high wattage iron for a particular job.

  • @konrad1704
    @konrad1704 3 ปีที่แล้ว

    it's possible to use this soldering iron with laptop charger
    or only with battery 4s/6s?.

    • @konrad1704
      @konrad1704 3 ปีที่แล้ว

      I checked. it's possible. But important things. power adapter have to be DC not AC!!!

  • @nyclassic4ever130
    @nyclassic4ever130 3 ปีที่แล้ว

    How much high power we talking for a powerbank?

  • @DougEfresh.
    @DougEfresh. 3 ปีที่แล้ว

    In other words where do I find the firmware?

  • @richardshort4587
    @richardshort4587 2 ปีที่แล้ว

    Laugh if you want, but for the amount of soldering I do I purchased one from the Dollar Store around 7 years ago and it works perfectly.

  • @jacobshroyer2420
    @jacobshroyer2420 3 ปีที่แล้ว +1

    Really wish this video came out 5 frickin’ days ago.....

  • @thefunkynotes8956
    @thefunkynotes8956 2 ปีที่แล้ว

    How long can you solder when using a battery as a power source, e.g. a single charge of 3-6s batteries? If anyone has tested charge duration, I'd really appreciate it!!! I want to replace the soldering iron I currently use when doing all my soldering on the porch, and I don't want to have to keep running an extension cord every time, but I do solder for long periods at a time.

    • @JoshuaBardwell
      @JoshuaBardwell  2 ปีที่แล้ว +1

      It's a good long while. The iron consumes about 60 watts when it's actually heating. A typical 5" battery is about 22 Wh, so in theory you would get about 20 minutes of actual on time. But in reality, the iron is only heating a small fraction of the time, and personally I have never run down a flight pack over the course of an afternoon.

    • @thefunkynotes8956
      @thefunkynotes8956 2 ปีที่แล้ว

      @@JoshuaBardwell - Thank you so much for the reply!!! Is that an afternoon of nonstop soldering, like about 3-4 hours or more?

  • @criminalhaze1
    @criminalhaze1 3 ปีที่แล้ว

    Your links seem to only go to the d60 b version ..just a heads up . Not sure if its sold out or what . But so people don't buy it expecting the digital version. Or maybe I'm just not seeing it.

    • @JoshuaBardwell
      @JoshuaBardwell  3 ปีที่แล้ว

      RDQ and GetFPV link are to a search for the term "sequre" in the whole store, returning all Sequre products sold by the store.

    • @criminalhaze1
      @criminalhaze1 3 ปีที่แล้ว

      Yeah they must not carry the digital version. But the banggood link has it. Thinking of getting the ts100 . If I buy it through banggood on your link will you get some commission? Or just if I buy the sequre? I just dont want to have to replace anything for a long time and the ts100 is only a couple bucks more really.

    • @criminalhaze1
      @criminalhaze1 3 ปีที่แล้ว

      What tips do you use the most would you say ?

  • @someoneonly
    @someoneonly 3 ปีที่แล้ว

    anyone got this iron to work over USB pd? I have a pd powerbank and a pd charger with type c cables tested to work with my surface pro but it never triggers the pd protocol

    • @JoshuaBardwell
      @JoshuaBardwell  3 ปีที่แล้ว

      It doesn't support pd as far as I know.

  • @ArenBrouwer
    @ArenBrouwer 3 ปีที่แล้ว

    Nice to see that you pay attention to us European people :-)

  • @DashzRight
    @DashzRight 3 ปีที่แล้ว +3

    I bought a 7$ iron in aliexpress about 5 years ago, I have built around 6 quads with it, one of them was a 2000$ photography platform, I also use it for everything else , from arduino to diy projects, and is just fine. I use a high quality soldering wire.
    So as many other products in the hobby Ill never understand the aversion and criticism for cheap gadgets. I do use a nice black taranis x9d (because it looks more professional when I have to work) and a 40$ flysky that has been with me for 5 years, and again, havent had a single issue with it, and I use it 75% of the time compared to the x9d...

  • @scu-dub
    @scu-dub 3 ปีที่แล้ว

    I like "secure" pronunciation lol I wanna know whatever I try to solder is secure lol👍🤞

  • @airheadbit1984
    @airheadbit1984 ปีที่แล้ว

    Update: Need a review of the Sequre SI012 PRO with TS-C1 and TS-ILS extra tips - USB C power + 450°F for less $$ soldering 32AWG wire to 1.5mm pads

  • @MysteryD
    @MysteryD 3 ปีที่แล้ว

    Where do I get a bent shaft shirt? lol is that what that is??

  • @MarcelloScardi
    @MarcelloScardi 3 ปีที่แล้ว

    Is it possible to power it with an external power supply with a jack connector?

    • @MarcelloScardi
      @MarcelloScardi 3 ปีที่แล้ว

      Interesting question!! I would like to know also if is possible to power it with an AC-DC converter

    • @JoshuaBardwell
      @JoshuaBardwell  3 ปีที่แล้ว +1

      It comes with a USB to barrel plug. The barrel plug can connect to a wall adapter.

    • @MarcelloScardi
      @MarcelloScardi 3 ปีที่แล้ว

      Thank you so much for the answer Joshua!! I am a big fan of your video that gives me the possibility to learn a lot!!! ;)

  • @roiad876
    @roiad876 3 ปีที่แล้ว

    Whats the difference between the "B" and "W" models?

    • @JoshuaBardwell
      @JoshuaBardwell  3 ปีที่แล้ว

      One has only three lights; the other has an LCD screen.

    • @roiad876
      @roiad876 3 ปีที่แล้ว

      @@JoshuaBardwell Ok I did a dumb question there, help a newbie out, are the tips of all soldering irons interchangeable? (I mean this and other brands) TL: I've only owned disposable irons for small work. Is it compatible with SQ-001 and TS-100 tips?