Man seriously thank you for making this video I have had fdr equipment for over a year but haven’t been able to use the processor or the saw head cause I could never get the key bindings right. So just been holding out till I ordered joy sticks. Seen your video yesterday and added them in Now I can finally use my Xbox controller with them. Now I can finally use them thanks a lot bud.
Hi, great video! I am running an xbox one controller at the moment and trying to figure out what the bind is with LB + DP down for example? Any clue? =D Would be nice with a video as you said below with explanation how to copy/paste the controller settings straight into my own XML file aswell. I just want the binds for FDR logging.
@@BenOfficial94the only issue with that is that I have other custom bindings. It may cause an issue especially with the enhanced vehicle. I'll upload the full input bindings tomorrow though if you want to give it a shot. Remember to back up yours first by copying yours to somewhere like your desktop.
The processor header won't let me cut....? Edit: You have to turn on the header, which is called a mulcher. Then it will let you cut trees. Also, thank you so much for this vid!!!
Help can you help me please I am trying to put in my binding codes with my Xbox gamepad every time I try to hit the buttons it comes back about a crazy mess or an example I was trying to put in for grappler An example of what is going on I have the LB plus RB plus LS dashwire APC plus APC Bixby saying as a pretty sick n***** as a pregnancy I think I see but left and right what comes on my computer when I try to use my keypad [[[ LB+RB+LS-X(+) OR *(-)* ]]] I'm trying my controller buttons resulting [[[ LS-Y(+)+LB+RB+LS-X(+) OR *(-)* ]]]! Can I go into source code and type this in and not have to use my keypad to type it in I want to play my game with my Xbox keypad I'll gain control and I'll be first heard a psychic. What do I need to do to go into source code if I go this route, When I try to put into a Spring cab like Spring Cadillac my paper saysTo go right you need to LB+RS-X (+) &(-) > On my computer for cab right it came out as < RS - X(+)+LB > and cab left < LB+RS-X (-) >Help please I Want to play the FDR Logging on fS23.
I might just be too stupid but I can't for the life of me get this to work, Tried the file you left in the description followed the YT Short you made, My in game controls wouldn't update, I tried 3 times. and when I try to put them in manually I get bindings that overlap making it so half of them don't work.
@@adamkovach23 Adam, just let me know how I can help. I want to make sure you can use these awesome mods! My email is on my channel page and you can also message me on Facebook.
Nice work man! thanks for sharing this with the community :)
Thank for all you do and for creating these awesome mods for us!
Man seriously thank you for making this video I have had fdr equipment for over a year but haven’t been able to use the processor or the saw head cause I could never get the key bindings right. So just been holding out till I ordered joy sticks. Seen your video yesterday and added them in Now I can finally use my Xbox controller with them. Now I can finally use them thanks a lot bud.
That's awesome! You're going to have a lot of fun using these, they are amazing mods!
Thank you for making this video I was wondering why they wouldn’t work at first
You are very welcome!
hey man, i just want to say, THANK YOU SOO MUCH FOR THIS VIDEO!!! i have ben trying to find the right controls for months. thanks a lot!
You are very welcome! Glad it was helpful!
Hi, great video! I am running an xbox one controller at the moment and trying to figure out what the bind is with LB + DP down for example? Any clue? =D Would be nice with a video as you said below with explanation how to copy/paste the controller settings straight into my own XML file aswell. I just want the binds for FDR logging.
th-cam.com/users/shortsX-E20izymvo?si=GGM7KnLvaJFz-oEQ
Did you ever make another video on this
th-cam.com/users/shortsX-E20izymvo?si=GGM7KnLvaJFz-oEQ
Can you do as video showing how to copy and paste the controls into the xml file?
Absolutely
@@PeterDoesFarming Can honestly say I found and opened the file and haven't a clue what to do either.
@@BenOfficial94 I should have a video up next week with the details of the input bindings file.
@PeterDoesFarming Alternatively could upload your input file, be easier for us who are a bit challenged. 😅
@@BenOfficial94the only issue with that is that I have other custom bindings. It may cause an issue especially with the enhanced vehicle. I'll upload the full input bindings tomorrow though if you want to give it a shot. Remember to back up yours first by copying yours to somewhere like your desktop.
The processor header won't let me cut....?
Edit: You have to turn on the header, which is called a mulcher. Then it will let you cut trees. Also, thank you so much for this vid!!!
Help can you help me please I am trying to put in my binding codes with my Xbox gamepad every time I try to hit the buttons it comes back about a crazy mess or an example I was trying to put in for grappler An example of what is going on I have the LB plus RB plus LS dashwire APC plus APC Bixby saying as a pretty sick n***** as a pregnancy I think I see but left and right what comes on my computer when I try to use my keypad
[[[ LB+RB+LS-X(+) OR *(-)* ]]] I'm trying my controller buttons resulting
[[[ LS-Y(+)+LB+RB+LS-X(+) OR *(-)* ]]]!
Can I go into source code and type this in and not have to use my keypad to type it in I want to play my game with my Xbox keypad I'll gain control and I'll be first heard a psychic. What do I need to do to go into source code if I go this route, When I try to put into a Spring cab like Spring Cadillac my paper saysTo go right you need to LB+RS-X (+) &(-) > On my computer for cab right it came out as < RS - X(+)+LB > and cab left < LB+RS-X (-) >Help please I Want to play the FDR Logging on fS23.
th-cam.com/users/shortsX-E20izymvo?si=GGM7KnLvaJFz-oEQ
The link to the bindings seems to be dead?
same i give up at this point lol
Updated: 1drv.ms/f/s!AstlsRygqKgtxHD8E94e1Fwqnjdi?e=zxK9T1
So I have the FDR input bindings selected but when I load in none of the bindings are set
@@ImmortalRC did you do it manually or make the edits in xml?
@@PeterDoesFarmingI’m super new to pc. I just downloaded it and swapped it in to my farm sim mod folder. I also use winrar
Any way I can cut manually like how they had before the update? Where I have to roll it manually to the size I want then cut it
I don't believe so. There was a giants update months back that broke that. It was when platinum expansion came out.
I might just be too stupid but I can't for the life of me get this to work, Tried the file you left in the description followed the YT Short you made, My in game controls wouldn't update, I tried 3 times. and when I try to put them in manually I get bindings that overlap making it so half of them don't work.
@@adamkovach23 Adam, just let me know how I can help. I want to make sure you can use these awesome mods! My email is on my channel page and you can also message me on Facebook.
Can you use use mods on Consol?
Unfortunately no
@@PeterDoesFarming ok thanks man
It’s broken now, you can’t paste it in…
You can't paste it or you can't copy it?
Angelina Center
Who?
STOP BS MAN AND DROP THE VID
th-cam.com/users/shortsX-E20izymvo?si=GGM7KnLvaJFz-oEQ