Your engines are works of art. Their small scale becomes apparent when your hand enters the video, making them even more amazing when you consider the tiny gears, valves, springs and screws you had to make. It's always a pleasure to watch them run.
Hello, I would like to thank you all very much, for your kind and warm comments. A question? ,Does the engine start from cold using Diesel Fuel, I have tried, and yes it does. Best regards Find.
Honestly, I would love to see you measure the efficiency and power of this engine. It runs so well and has a nice quiet chuff. I imagine it could power a few radios or light bulbs.
One of my goals is to build a stationary single cylinder wood gas engine with high compression. I love watching these single cylinder engines and getting ideas from them.
Always a pleasure to hear you talk about, and show your beautiful engines. I can't believe how well you make even the pipework, so often neglected by builders.
Incredible talent and engines. Absolute pleasure watching your video and listen to your descriptions. Would be an honor to one day proudly own and display one of your engines
Like most diesel engines running on pump diesel, once the engine gets warmed up to near 90 degrees C, it will run a little smoother, quieter, and make less smoke.
There are a few diy / “open source” designs for a “Dynamometer” out there if i remember correctly. I think the most basic form is just a motor/generator, a multimeter, and some sort of electrical load? I do remember something about load cells too. At the end of the day even just lighting up some LEDs or a Radio as another comment suggested would be really neat!
Awesome, this has answered one of my biggest questions regarding your true diesels. Now my biggest question is how it would go doing some work, perhaps driving a mini water pump? I'm in awe of your workmanship still, and I've known of your engines since I was 12 or 13, 2012/2013.
You are welcome for my watching, but thank you more for providing me with something good and wholesome to watch! Will the cold engine start on diesel? We had a tractor on the farm which started on one type of fuel then when warm, switch to gasoline. Could have been "white gas" to start. Just curious! Thank you again!
Dear Mr. Hansen! Thank you for youth fantastic work and especially thanks for sharing them! I've got one question, have you ever measured the power any of this engines?
I am a subscriber to your channel MrFactotum, and a great admirer. If you have only just discovered Mr Hansen, you are in for a real treat watching his previous videos (which I very strongly recommend) - an absolutely first-class craftsman, and I think a man after your own heart. He seems not have published any plans, but perhaps he will answer for himself. He has a couple of videos describing construction of some of his masterworks, but none actually showing all his processes. Essentially it's old lathes, a bit of milling, and very skilled hands, combined with a real engineers design ability. I have seen no other true model diesels, perhaps they exist (most things do, somewhere) but at this scale it is miraculous he has worked out a system for getting them to run, it seems to have taken him several decades, using old early 20th century engines for inspiration, and working forward from hot bulb engines to true diesels.
@@thisnicklldo eyup tnld, i know you sub to me, it registers with me all the subscribers who take interest by commenting to me. I try to make a point of remembering everyone👍👍 Thanks for taking time to message me, yes he's a great miniature ( some say model but model to me doesn't do any craftsman justice) engineer and machinist, i was particularly interested in his gear cutting on his lathe as i was thinking in advance to perhaps make my micro lathe do similar, in the future, once i get it finished, tested and used. There is some great people on you tube sharing their skills, some go above and beyond in sharing their knowledge. I get why he does'nt produce plans, it's his individuality of workmanship and it can get very time consuming when many want his attention and most don't intend to do anything with it. So each to their own. It's a shame though his unique work isn't drawn up and detailed, or may be it is!!!!!privately ATB👍👍👍👍Kev
I know it may sound stupid, but could you please try to run one on vegetable oils or biodiesel? Real diesels can and I’m really curious what the differences is in this one
I wonder how high sulfur diesel performs in that compared to low sulfur and even ultra low sulfur diesel compares. They do have Cetane booster you could add to the pump fuel and it does bring back the performance of ULSD to the combustion performance of higher sulfur diesel I don't think diesel lubricant substitutes would be needed for that small engine since it is not running for for long periods of time but it would not hurt to add it.
Here in denmark we only have a single type of diesel (B7) at regular pump stations. However it is possible to get GTL at some stations, but it's not common.
Flot motor.. Og imponerende stykke arbejde du har lavet Find. Jeg er meget nysgerrig på hvordan du laver dem. Er det et Kit du køber, eller er alt lavet fra bunden?
Be careful to remove all the pump diesel from your fuel system afterwards. The reason for this is that modern pump diesel usually contains a little biodiesel. Over time it corrodes any parts made of copper alloys, creating a greenish sludge as residue! This isn't a problem for full sized diesels as they don't use copper parts in their fuel systems, however for your engine it could cause damage. With a copper free fuel system, 100% biodiesel would be an excellent fuel, much less offensive exhaust smell and superior lubrication qualities compared to petro-diesel.
Is that true in all countries or what? Which country are you in where that is the case is probably a better eay to word my question. Either way caution and prevemtative maintain is good i guees. Also i am a MAJOE alternative fuels nerd, so in will take note on the potential Biodiesel issues! I know in the USA Biodiesel is rare (although all gasoline is E15 or so), B100 and various lower mixes are listed on the Energy.gov “alternative fuel center” but my area has none sadly.
@@ericlotze7724 I'm sure there is regional variation, but biodiesel is a common additive used to increase the 'lubricity' of the fuel, which is otherwise reduced by the chemical process which removes the sulfur from the fuel to turn it into ULSD. In Europe the EN590 standard for diesel fuels permits a biodiesel content of up to 7%.
sir i would request you to run the engine on peanut oil pliz heat the peanut oil a bit warm before putting into fuel tank and then start the engine, as this is the replica of the rudolf diesels engine it will run on peanut oil too pliz try sir i would plead you and make video
I had a friend who was from Sweden and he subscribed to the newspaper and had them sent to the USA He would read them to me and I noticed that the papers were glued together and not like ours. Are your newspapers glued together still? Thanks
They stopped using clips in the eighties to ease the recycling. Then they began using them again. Now we have both, I rarely see a glued newspaper. Same with envelopes. They have been recyclable, then not, then they were and now they are not. Humanity is running in circles as usual.
To be honest, kerosene, lamp oil and diesel is nearly identical, it's really only purity that differ. Kerosene is a pure and very clean form of fuel oil, wheres pump diesel has all kinds of crap, crud, water and emmissions related additives in it. In fact im fairly sure lamp oil is just another name for kerosene.
I would LOVE to be able to buy one of those and put it in a model ship... Right now I am running this: th-cam.com/video/20EiBJfWSSo/w-d-xo.html A 5 cc fourstroke gasoline engine running 1500 RPM, driving a controllable pitch propeller. But I would LOVE to have a true injected Diesel crosshead slow speed engine.
"Thank you for watching"
No, Sir, thank you very much for giving us this demonstration!
Your engines are works of art. Their small scale becomes apparent when your hand enters the video, making them even more amazing when you consider the tiny gears, valves, springs and screws you had to make. It's always a pleasure to watch them run.
Thank you for sharing Mr Hansen, I love these videos of your engines!
Hello, I would like to thank you all very much, for your kind and warm comments. A question? ,Does the engine start from cold using Diesel Fuel, I have tried, and yes it does. Best regards Find.
Your craftsmanship is most impressive, thankyou for sharing!
good to see you again on the ytube all the best to you and yours from John in Texas
Thank you, your videos are a pleasure to watch and your engines are an engineering wonder.
I am always fascinated with your work, what a great mind you have 😇🙏
Another wonderful engine. You videos have been sorely missed.
Hey good to see you are still around. I would love to buy a mini diesel kit if you ever do decide to make some one day.
Honestly, I would love to see you measure the efficiency and power of this engine. It runs so well and has a nice quiet chuff. I imagine it could power a few radios or light bulbs.
Beautiful engine!
Welcome back! Always a pleasure seeing your projects!
One of my goals is to build a stationary single cylinder wood gas engine with high compression. I love watching these single cylinder engines and getting ideas from them.
My dream is to stick my finger in the flywheel spokes while it's running
That runs very well on pump diesel.
Thank you so very much for taking the time to share this with us all. ❤
Always a pleasure to hear you talk about, and show your beautiful engines. I can't believe how well you make even the pipework, so often neglected by builders.
Incredible talent and engines. Absolute pleasure watching your video and listen to your descriptions. Would be an honor to one day proudly own and display one of your engines
Thank you for another video showing your wonderful engines .
Dear Find,
Thank you! Your videos are priceless, and your inventions beyond imagination!
Best wishes from George in UK!
Als alter Motoren Alkoholiker ist es für mich ein Wunder das der kleine Motor so schön mit Diesel läuft.
you are a true master!
Find! Nice to see a video from you. Best wishes for the holidays.
Beautiful engine
Like most diesel engines running on pump diesel, once the engine gets warmed up to near 90 degrees C, it will run a little smoother, quieter, and make less smoke.
Nice that u post a new video Find ! warm greetings from vienna . Pirmin
Absolutely Delightful!
Hi it is nice to se you posting agen after a long time, glad to se something new.
I don’t know how it would be done but it would be interesting to measure the power and torque each engine makes on various fuels
There are a few diy / “open source” designs for a “Dynamometer” out there if i remember correctly.
I think the most basic form is just a motor/generator, a multimeter, and some sort of electrical load? I do remember something about load cells too.
At the end of the day even just lighting up some LEDs or a Radio as another comment suggested would be really neat!
Maybe he could try it on biodiesel or even vegetable oils? Just a thought
Looks sounds and runs beautifully
I still remember your video about injection timing many many years ago
Lovely work Mr Hansen,many labour hours of love
Thank you very much! For Posting this! Beautiful work!
Awesome, this has answered one of my biggest questions regarding your true diesels.
Now my biggest question is how it would go doing some work, perhaps driving a mini water pump?
I'm in awe of your workmanship still, and I've known of your engines since I was 12 or 13, 2012/2013.
You are welcome for my watching, but thank you more for providing me with something good and wholesome to watch! Will the cold engine start on diesel? We had a tractor on the farm which started on one type of fuel then when warm, switch to gasoline. Could have been "white gas" to start. Just curious! Thank you again!
Another fine video of a fantastic model engine. Somehow I knew it would run just fine on regular diesel fuel.
Dear Mr. Hansen! Thank you for youth fantastic work and especially thanks for sharing them! I've got one question, have you ever measured the power any of this engines?
I only watched about 2 seconds of this video and already liked it. 👍
Thank you!
great miniature engine, mr hansen, did you make it, are plans available
thanks for sharing👍👍
Kev
I am a subscriber to your channel MrFactotum, and a great admirer. If you have only just discovered Mr Hansen, you are in for a real treat watching his previous videos (which I very strongly recommend) - an absolutely first-class craftsman, and I think a man after your own heart. He seems not have published any plans, but perhaps he will answer for himself. He has a couple of videos describing construction of some of his masterworks, but none actually showing all his processes. Essentially it's old lathes, a bit of milling, and very skilled hands, combined with a real engineers design ability. I have seen no other true model diesels, perhaps they exist (most things do, somewhere) but at this scale it is miraculous he has worked out a system for getting them to run, it seems to have taken him several decades, using old early 20th century engines for inspiration, and working forward from hot bulb engines to true diesels.
@@thisnicklldo eyup tnld,
i know you sub to me, it registers with me all the subscribers who take interest by commenting to me. I try to make a point of remembering everyone👍👍
Thanks for taking time to message me, yes he's a great miniature ( some say model but model to me doesn't do any craftsman justice) engineer and machinist, i was particularly interested in his gear cutting on his lathe as i was thinking in advance to perhaps make my micro lathe do similar, in the future, once i get it finished, tested and used.
There is some great people on you tube sharing their skills, some go above and beyond in sharing their knowledge.
I get why he does'nt produce plans, it's his individuality of workmanship and it can get very time consuming when many want his attention and most don't intend to do anything with it. So each to their own. It's a shame though his unique work isn't drawn up and detailed, or may be it is!!!!!privately
ATB👍👍👍👍Kev
I know it may sound stupid, but could you please try to run one on vegetable oils or biodiesel? Real diesels can and I’m really curious what the differences is in this one
Incredible precision and passion 👏 would be an honor to own one of your masterpieces Find
I recommend you try HVO diesel. It is a very clean synthetic diesel. I run all of my old machines on it.
A great benefit of it is the smell, or rather the complete lack of it.
nice to hear you again super engine as normal
I wonder how high sulfur diesel performs in that compared to low sulfur and even ultra low sulfur diesel compares. They do have Cetane booster you could add to the pump fuel and it does bring back the performance of ULSD to the combustion performance of higher sulfur diesel I don't think diesel lubricant substitutes would be needed for that small engine since it is not running for for long periods of time but it would not hurt to add it.
great video find
keep it up
been a while
Amazing! could you try Bio Diesel next time? works great in my truck, in winter I have to blend it with with pump diesel or kerosene
Hi , thanks for your channel and nice explanation
Would you please to draw a diagram about direction of fuel and water ?
Hej Find,
Jeg elsker når der kommer en ny video fra dig.
Den kører perfekt på diesel.
The difference is slight, but the knocking sound at injection seems a little louder on diesel. What grade of diesel was that?
Here in denmark we only have a single type of diesel (B7) at regular pump stations.
However it is possible to get GTL at some stations, but it's not common.
@@HomelabExtremeGTL with its high cetan number would be interesting.
@@HomelabExtreme Ah, good to know. Thank you.
Flot motor.. Og imponerende stykke arbejde du har lavet Find.
Jeg er meget nysgerrig på hvordan du laver dem. Er det et Kit du køber, eller er alt lavet fra bunden?
That is really a very beautiful engine. And runs superbly. Thank you.
Be careful to remove all the pump diesel from your fuel system afterwards. The reason for this is that modern pump diesel usually contains a little biodiesel. Over time it corrodes any parts made of copper alloys, creating a greenish sludge as residue! This isn't a problem for full sized diesels as they don't use copper parts in their fuel systems, however for your engine it could cause damage.
With a copper free fuel system, 100% biodiesel would be an excellent fuel, much less offensive exhaust smell and superior lubrication qualities compared to petro-diesel.
Is that true in all countries or what? Which country are you in where that is the case is probably a better eay to word my question. Either way caution and prevemtative maintain is good i guees. Also i am a MAJOE alternative fuels nerd, so in will take note on the potential Biodiesel issues!
I know in the USA Biodiesel is rare (although all gasoline is E15 or so), B100 and various lower mixes are listed on the Energy.gov “alternative fuel center” but my area has none sadly.
@@ericlotze7724 I'm sure there is regional variation, but biodiesel is a common additive used to increase the 'lubricity' of the fuel, which is otherwise reduced by the chemical process which removes the sulfur from the fuel to turn it into ULSD. In Europe the EN590 standard for diesel fuels permits a biodiesel content of up to 7%.
Start so easily! WOW!
Now all it needs is a model SCR System and some Pump DEF !
Yes, and a couple thousand plastic parts :)
Hej det er virkelig nogle flotte motorer du laver, virkelig imponerende håndværk 👍 og den går da perfekt på diesel.😉
beautiful.
Hi from Australia . Do like your engines . How about some tips pn building some .. thankyou for your valuable time
Beautiful
❤
Excellent!🎉🎉🎉
sir i would request you to run the engine on peanut oil
pliz heat the peanut oil a bit warm before putting into fuel tank and then start the engine, as this is the replica of the rudolf diesels engine it will run on peanut oil too pliz try sir i would plead you and make video
Hello Find ! i hope you are doing well ! Have you made any new engines in the past months ? Best Regards Pirmin
Very nice
Muito bonito um relógio lenta perfeita 😊 moro no sul do Brasil🎉
Que diferencia hay entre el diámetro del pistón y el diámetro interior del cilindro
I had a friend who was from Sweden and he subscribed to the newspaper and had them sent to the USA
He would read them to me and I noticed that the papers were glued together and not like ours.
Are your newspapers glued together still? Thanks
They stopped using clips in the eighties to ease the recycling. Then they began using them again. Now we have both, I rarely see a glued newspaper. Same with envelopes. They have been recyclable, then not, then they were and now they are not. Humanity is running in circles as usual.
It would be thegreatest of fun to build this into a canoe!
To be honest, kerosene, lamp oil and diesel is nearly identical, it's really only purity that differ. Kerosene is a pure and very clean form of fuel oil, wheres pump diesel has all kinds of crap, crud, water and emmissions related additives in it.
In fact im fairly sure lamp oil is just another name for kerosene.
Que diámetro tiene la rosca del inyector
Que diámetro tiene el vástago de la válvula y la válvula
Try gtl diesel very clean
Como se llama la conexión del tubo del combustible
Onde comprar?
Can we talk？
I would LOVE to be able to buy one of those and put it in a model ship...
Right now I am running this: th-cam.com/video/20EiBJfWSSo/w-d-xo.html
A 5 cc fourstroke gasoline engine running 1500 RPM, driving a controllable pitch propeller.
But I would LOVE to have a true injected Diesel crosshead slow speed engine.
You can sale one of your engines
you need to fit to your bicycle
thats a waste of diesel