I love how this works. But now I wish the devs would just add some more building tools - reference lines, the ability to determine the rotation of pieces with numerical values - that would make all of this glitch stuff obsolete.
So, after a few Waypoint patches, I got to the step at 5:29 where you're glitching the angled wall followed by an angled floor, and my build was only working for two sides. For the two other sides, I was getting a slightly rotated angled wall, which also messed up the floor placement. Almost looked like I was applying an unintentional tether glitch. It took me a while to figure out what the problem was, but it ended up that doing the diagonal wire slightly rotated the connection on that side. To fix it, I deleted the wires on the two accidentally rotated sides. I then went back to a garage door facing that side, then reverse wire glitched a center floor to the garage door. Then I used walls to reverse wire glitch both of the sides into the center. Once here, pulling down from the point of the pyramid got me a connector that could wire glitch walls and floors at the correct angle. You can avoid this by skipping the diagonal wire at 1:46 entirely, and just redoing the garage door steps rotated 90 degrees instead.
hey are you still currently building? im struggling with getting the center block in the middle to start the diagonal angles to go not be angled. any tips? If you have discord add me - Teez#1069 (caps sensitive)
@@xchronicxx I am unfortunately on a Comcast connection that is down more than it is up this week. Pretty sure this "Gig speed internet" is just a marketing term used to separate fools like me from our money. Since I can't see your build as you do it... my advice is to pay special attention to when Beeblebum deletes a wire connection. It's possible that you're hitting the buttons just slow enough to trigger the tether glitch instead of the wire glitch, but it might also be that you forgot to delete a connection and that wire connector isn't facing the way you want. If you need to check, trigger the wire menu and look at which direction the lighting bolt's point is facing. That'll tell you if it's angled correctly. I've had the same issue you are having before, and it's almost always because I deleted wires in the wrong order or I left one connected that I shouldn't have.
ive never been much of a builder but i do really like these tutorials as it gives me an understanding of what it took to build any base im making a video on and you appreciate the build more 07 great vid
Thank you for this one. I started up a low orbit base in Odyalutai (#256) last week with the intention of making it look like the pyramid ship from Stargate. I was using the corner roof pieces with sloped roofs and it just did not come together in a manner that worked for the build. This'll force me to redo the thing, but I'm sure it'll come out a lot better looking.
Nicely done! Don't even need any other measurements, you could just build down to make a bigger one, no? Cheer, mate! Now if only there were a way to make a pyramid that twists as it ascends from bottom to top! 🙂
That seems very hard to do. A twisting tower is fairly easy (yet at the limit of my skill/brain level, and tedious), but a twisting pyramid just seems insanely hard to build. Come to think of it I'm pretty sure I understand how it can be done, but the method I can think of would require ridiculous patience that probably only you have.
@@Dellerss i've already done it, have a tutorial on it too! Im just being cheeky lol. It's actually not as complex as some of my other methods, but is time consuming for sure
@@Criscrosaplesos Why am I not surprised? Different method, but same result. I'm much less of a wire person I guess, it's just a little too complicated to work with for me :)
@M159KTTR na I definitely tried for 3 days I can't do it , but my friend gave me sum Ai valves he told me ta sell them but I could give em to you if u could build it for me
As the think is too fickle - I did not make a guide about it. I did however Live-Stream it to show how I did it: th-cam.com/users/livef3vpcCyKM-Q?feature=share
Great video. Thanks very much. I can do everything until just after the 4 wires from the top. I place the 4 wires and then I try to put the 4 angled walls up to start the pyramid but only 3 go angled with the wires. The 4th one won't do it. It places at a different angle. I have replaced the wire. I have checked under the floor. There is nothing in the way. I even started over and it happened again. Any help appreciated.
Hello Beeblebum Maybe you never read this. I tried this, but my walls which should be 45° looking to the top, are turned 90° and so I cant work out how to turn around them. Do you have any idea?
@@hangin78 Ah ok, Most likely you did not follow the right sequence of pulling the wire. It can also be the initial wire was directed wrong. Pay attention to how the symbol is directed when placing a wire. If you are not entirely sure what I mean - Check out this Guide here: th-cam.com/video/BbDxEYdgZpU/w-d-xo.htmlsi=2jwR6dsiXjMyoe-k It is slightly outdated concerning the switches having upside down connectors, but the general idea should help you.
Hey Man Thanks a lot for your help and all the great stuff you share with us noobs. 😅 Have a great day, I'll send you a link to my atlas once it's done.👋
That was so inspiring! If you like, come have a visit.🤗 Eissentam Galaxy Bird l sunset l face l moon l face l bird l face l 4x sunset l tree Thank you so much!!!
Just to be sure, as not everyone is aware of the techniques, were you using "the wire glitch" method? As you can not just snap a floor onto a wire connection.
So I followed this step by step as carefully as I could, but I have one side that will not place the diagonal wall. I've tried everything I can think of even redoing the wires, but no matter what I try the wall either goes in crooked or upside down. When I thought I managed a work around, the floors go in upside down. I don't know what I did wrong but I'm running out of ideas.
@@adamwright9150 You can see the connector how it is directed - to get more in depth information about this, you could check this guide out: th-cam.com/video/BbDxEYdgZpU/w-d-xo.html
@Beeblebum Wanted to let you know I tried again with a 13 by 13 base and this time it worked. I have more work to do to finish the sides and everything but looks like I can finally have my floating diamond base. I even used the method to make a smaller pyramid on the ground just beneath. Thank you for all the help.
So the wire vanishing isnt something one of my mods was doing, guess i can stop removing and replacign mods now This wire vanishing is still a problem for the AIRLOCK doors, that little cute vertical wire seems necessary in the early stages of the build I gave up on the airlock i wanted and instead built APG's Powerless Airlock with the help of DG Squared But id still like to figure out the the usual airlock, i realise its just a matter of safeguarding those 2 wire end snap points, but when i do this my wires get twisted
Yeah, the Wire deletion is a new "feature" 😄 I actually did a guide on making an airlock without any wire glitching: th-cam.com/video/BiygsDyTIok/w-d-xo.html
@@Beeblebum Thank you Beebs I shouldve just checked your channel instead of searchign YT for "Airlocks" Because YT may have been programmed by the same people at HG, it will always show you a 10 month old video first lol Thanks again, not just for linking it, but for all these wonderful and easy to copy guides
I seem to have a really hard time getting the wire glitch timing right. I'm starting to wonder if it's because my mouse is wired but my keyboard is wireless. Should I be using a wired keyboard for this? Should it matter?
M/K is one of the tougher ways to glitch build, I prefer using my PS5 Controller on the PC for that. Or you can install Macro's If you have a compatible Keyboard.
It is tough even with a wired keyboard and mouse. I have mechanical switches on my Keyboard they have millisecond response times. It takes a lot of practice but eventually you get used to it. I built my Activated indy mine using reverse wire glitching and it was frustrating placing 50+ mineral extractors + hoppers.
When I put the tilted wall, before the tilted floor on the sides, the wall is rotated 90 degrees to the side!!! It is tilted towards the side of the pyramid but it's 90 degrees to the sides... Please help
I do not really understand what you are trying to explain. It might be best to jump into the discord and visually share your problem. (discord.gg/tApR68D) Even If I am not in time to answer it, there are a lot of builders that will have good suggestions.
My final two angled floors are always twisting and its doing my head in. I just watched the 'wire mastery' and still cant see whats going wrong. Would be grateful for any ideas from anyone please.
If you really are having trouble with the twisted parts, then I would advice to only do the angle wire per wire, so the other connections do not mess with it. Also, always pull from the top connector to the bottom, to ensure the wire takes the direction of the bottom connector. And, if you still have issues, glitch a wall on the foundation wire (the ones at the bottom of your pyramid base) if your wall glitches straight, then you should have a good base, if not, then the foundation wire is probably twisted.
Cheers @@Beeblebum i went back at it last night and started from scratch, on 5x5. It was still a struggle I think because I built it on the ground but finally worked. Then I did the 'columns' and those worked great too.
A great tutorial but I don’t think it’s workable for me on ps4. The reverse wire glitch would be incredibly awkward with my small hands. I will give it a go but don’t hold out much hope.
I hate this build glitching stuff. How about make a gnarly base how you were intended to. I’ll wait for Hello Games to adds these types of functions legitimately, until then, this shot isn’t worth learning imo.
I love how this works. But now I wish the devs would just add some more building tools - reference lines, the ability to determine the rotation of pieces with numerical values - that would make all of this glitch stuff obsolete.
Before you know it, NMS would be a full grown CAD tool, and we'd be looking for ways to extract the embedded STL files from saves. *8')
That or just provide us with angled pieces. I mean they have a prefab 30 degree angled ramp so its possible.
@@stephanepoirier5582 Funny getting a reply all this time later. I moved on, completely, to Valheim. The build system is so much better.
@@markrichards7377 I'm getting a bit annoyed at how buggy and unessarely complicated NMS is. I'll check out V.
@@stephanepoirier5582 it’s not very complicated? Place pieces. Build base…
So, after a few Waypoint patches, I got to the step at 5:29 where you're glitching the angled wall followed by an angled floor, and my build was only working for two sides. For the two other sides, I was getting a slightly rotated angled wall, which also messed up the floor placement. Almost looked like I was applying an unintentional tether glitch. It took me a while to figure out what the problem was, but it ended up that doing the diagonal wire slightly rotated the connection on that side. To fix it, I deleted the wires on the two accidentally rotated sides. I then went back to a garage door facing that side, then reverse wire glitched a center floor to the garage door. Then I used walls to reverse wire glitch both of the sides into the center. Once here, pulling down from the point of the pyramid got me a connector that could wire glitch walls and floors at the correct angle. You can avoid this by skipping the diagonal wire at 1:46 entirely, and just redoing the garage door steps rotated 90 degrees instead.
hey are you still currently building? im struggling with getting the center block in the middle to start the diagonal angles to go not be angled. any tips?
If you have discord add me - Teez#1069 (caps sensitive)
@@xchronicxx I am unfortunately on a Comcast connection that is down more than it is up this week. Pretty sure this "Gig speed internet" is just a marketing term used to separate fools like me from our money. Since I can't see your build as you do it... my advice is to pay special attention to when Beeblebum deletes a wire connection. It's possible that you're hitting the buttons just slow enough to trigger the tether glitch instead of the wire glitch, but it might also be that you forgot to delete a connection and that wire connector isn't facing the way you want. If you need to check, trigger the wire menu and look at which direction the lighting bolt's point is facing. That'll tell you if it's angled correctly. I've had the same issue you are having before, and it's almost always because I deleted wires in the wrong order or I left one connected that I shouldn't have.
Thanks for the building videos. For some reason your way of explaining really clicks for me. Cheers lad.
Yo Simon! Thanks for the Superthanks! Glad to help.
Have a great New Year! 😊
ive never been much of a builder but i do really like these tutorials as it gives me an understanding of what it took to build any base im making a video on and you appreciate the build more 07 great vid
I know this is an older tutorial, but it still works perfectly! Thank you for all you do for the community, Beeblebum!
This is a simple and great method to build a beautiful pyramid, thanks a lot.
Thank you for this one. I started up a low orbit base in Odyalutai (#256) last week with the intention of making it look like the pyramid ship from Stargate. I was using the corner roof pieces with sloped roofs and it just did not come together in a manner that worked for the build. This'll force me to redo the thing, but I'm sure it'll come out a lot better looking.
Tnk U soooo much!!! Fantastic Tutorial. 🤩
Thank you soooo much. Missed whatever update changed the wire deletion thing and was going nuts on a new build . Great tutorial 👌 👍 👏
Nicely done! Don't even need any other measurements, you could just build down to make a bigger one, no? Cheer, mate!
Now if only there were a way to make a pyramid that twists as it ascends from bottom to top! 🙂
Only a crazy person would attempt such a thing 🤪
That seems very hard to do. A twisting tower is fairly easy (yet at the limit of my skill/brain level, and tedious), but a twisting pyramid just seems insanely hard to build. Come to think of it I'm pretty sure I understand how it can be done, but the method I can think of would require ridiculous patience that probably only you have.
@@Dellerss i've already done it, have a tutorial on it too! Im just being cheeky lol. It's actually not as complex as some of my other methods, but is time consuming for sure
@@Criscrosaplesos Why am I not surprised? Different method, but same result. I'm much less of a wire person I guess, it's just a little too complicated to work with for me :)
@@Dellerss I get it, we all have are strengths and weaknesses. I suck at interior design lol its my kryptonite
Thanks Beebs I look forward to trying this.
Always good to stay current with the current status of the game mechanics
Thanks Beebs! You're the best
Thank you that's an awesome tip
Awesome new build tutorial for pyramid building Beeblebum 🐝 I was wondering how to get around the wire deletion issue with powered devices.
good video, I guess I need a macro, for PC I can not get timing to work... thanks for sharing
Very cool! Thanks for the video!
Great update video!
To honor Beeblebum's work, I shalll build him a pyramid.
I tried. Same idea. Didn't work out. One pyramid was good.
Wuooou, se ve espectacular esa pirámide! 😎🤟🏻🏴☠️🛸
My pyramid came out great! Thanks!
I'm building this, inspired by Me-Na-Rah Pyramid. Just wanna thank you for the tutorial! :D
I loved the tutorial, it worked perfectly. You gained a subscriber. Now I can make my Illuminati base 😂
Perfeita. Mas com a nova atualização como podemos fazer formas de losangos?
Awesome video. How the heck did you make those amazing looking portals?
Hey dude awesome video made 7 by 7 pyramid whats the vest option for a door standing inside pyramid still gettin storm damage
Thanks again bee!
Nice workaround sir.
**** that was hard but in the end I did it, thank you for your assistance.
do it still work
@joev7664 think so but haven't tried.
@M159KTTR think u could swing bye n build 1 for me
@@joev92 lol if I managed it so cam you
@M159KTTR na I definitely tried for 3 days I can't do it , but my friend gave me sum Ai valves he told me ta sell them but I could give em to you if u could build it for me
Is there a video about the portals you build in the background?
As the think is too fickle - I did not make a guide about it.
I did however Live-Stream it to show how I did it: th-cam.com/users/livef3vpcCyKM-Q?feature=share
Thanks! 🙏🏽🙏🏽
Laughs in Rhulk
Great video. Thanks very much. I can do everything until just after the 4 wires from the top. I place the 4 wires and then I try to put the 4 angled walls up to start the pyramid but only 3 go angled with the wires. The 4th one won't do it. It places at a different angle.
I have replaced the wire. I have checked under the floor. There is nothing in the way. I even started over and it happened again. Any help appreciated.
It's the wall you place at 5:32.
Sorry for adding a comment so late, but it is possible to create a 3-sided pyramid?
Oh look there is a non live stream video! Oh... i mean a new Building Tutorial Cool!!! Greez @Beeble The Master Builder!
My Wire twists…Please how do I correct that issue, I know you’ve said before but I can’t find tutorial. 🙏🏾
Towards the end I can build the walls in and angle did they fix this…
Hello Beeblebum
Maybe you never read this.
I tried this, but my walls which should be 45° looking to the top, are turned 90° and so I cant work out how to turn around them.
Do you have any idea?
Hey, I am not sure what you mean - It might be better to join the discord and share a screenshot of your problem. 👍
@ 5:28 the top of your glitched wall looks upwards, mine is turned to 9o'clock side looking up.
Thanks for your reply!
@@hangin78 Ah ok, Most likely you did not follow the right sequence of pulling the wire.
It can also be the initial wire was directed wrong.
Pay attention to how the symbol is directed when placing a wire.
If you are not entirely sure what I mean - Check out this Guide here: th-cam.com/video/BbDxEYdgZpU/w-d-xo.htmlsi=2jwR6dsiXjMyoe-k
It is slightly outdated concerning the switches having upside down connectors, but the general idea should help you.
Hey Man
Thanks a lot for your help and all the great stuff you share with us noobs.
😅
Have a great day, I'll send you a link to my atlas once it's done.👋
That was so inspiring! If you like, come have a visit.🤗
Eissentam Galaxy
Bird l sunset l face l moon l face l bird l face l 4x sunset l tree
Thank you so much!!!
does it still wrk
Thanks beebs ,very simple method, even dummy newbies like me can follow that. Just made my first,thanks again.
I don't know why, but I just can't snap the middle small panel on the floor at 2:26, I've tried like million times...
Just to be sure, as not everyone is aware of the techniques, were you using "the wire glitch" method?
As you can not just snap a floor onto a wire connection.
@@Beeblebum My mistake entirely, I've fixed it, The method you showed works just fine. Thanks!
So I followed this step by step as carefully as I could, but I have one side that will not place the diagonal wall. I've tried everything I can think of even redoing the wires, but no matter what I try the wall either goes in crooked or upside down. When I thought I managed a work around, the floors go in upside down. I don't know what I did wrong but I'm running out of ideas.
Try Doing Each Side Separately, It can happen that Wires start tilting because you attach them to the angled wire instead of the Vertical Wire.
@Beeblebum I'll give it a try sometime. Is there a way to tell if the wires are tilted? Or is it luck? This was my first try at any glitch building.
@@adamwright9150 You can see the connector how it is directed - to get more in depth information about this, you could check this guide out: th-cam.com/video/BbDxEYdgZpU/w-d-xo.html
@@Beeblebum Will do! Thanks.
@Beeblebum Wanted to let you know I tried again with a 13 by 13 base and this time it worked. I have more work to do to finish the sides and everything but looks like I can finally have my floating diamond base. I even used the method to make a smaller pyramid on the ground just beneath. Thank you for all the help.
So the wire vanishing isnt something one of my mods was doing, guess i can stop removing and replacign mods now
This wire vanishing is still a problem for the AIRLOCK doors, that little cute vertical wire seems necessary in the early stages of the build
I gave up on the airlock i wanted and instead built APG's Powerless Airlock with the help of DG Squared
But id still like to figure out the the usual airlock, i realise its just a matter of safeguarding those 2 wire end snap points, but when i do this my wires get twisted
Yeah, the Wire deletion is a new "feature" 😄
I actually did a guide on making an airlock without any wire glitching: th-cam.com/video/BiygsDyTIok/w-d-xo.html
@@Beeblebum Thank you Beebs
I shouldve just checked your channel instead of searchign YT for "Airlocks"
Because YT may have been programmed by the same people at HG, it will always show you a 10 month old video first lol
Thanks again, not just for linking it, but for all these wonderful and easy to copy guides
I seem to have a really hard time getting the wire glitch timing right. I'm starting to wonder if it's because my mouse is wired but my keyboard is wireless. Should I be using a wired keyboard for this? Should it matter?
M/K is one of the tougher ways to glitch build, I prefer using my PS5 Controller on the PC for that.
Or you can install Macro's If you have a compatible Keyboard.
@@Beeblebum Thanks man! I should have thought of a macro, I haven't used them before but I'm confident I can figure it out. Appreciate the reply!
It is tough even with a wired keyboard and mouse. I have mechanical switches on my Keyboard they have millisecond response times. It takes a lot of practice but eventually you get used to it. I built my Activated indy mine using reverse wire glitching and it was frustrating placing 50+ mineral extractors + hoppers.
Is that easier than before?
Looks easier.
There's a different method than this which is a lot easier to do. this method is way to complicated
When I put the tilted wall, before the tilted floor on the sides, the wall is rotated 90 degrees to the side!!!
It is tilted towards the side of the pyramid but it's 90 degrees to the sides...
Please help
I do not really understand what you are trying to explain.
It might be best to jump into the discord and visually share your problem. (discord.gg/tApR68D)
Even If I am not in time to answer it, there are a lot of builders that will have good suggestions.
@@Beeblebum thanks for helping, will join asap 👍
My final two angled floors are always twisting and its doing my head in. I just watched the 'wire mastery' and still cant see whats going wrong. Would be grateful for any ideas from anyone please.
If you really are having trouble with the twisted parts, then I would advice to only do the angle wire per wire, so the other connections do not mess with it.
Also, always pull from the top connector to the bottom, to ensure the wire takes the direction of the bottom connector.
And, if you still have issues, glitch a wall on the foundation wire (the ones at the bottom of your pyramid base) if your wall glitches straight, then you should have a good base, if not, then the foundation wire is probably twisted.
Cheers @@Beeblebum i went back at it last night and started from scratch, on 5x5. It was still a struggle I think because I built it on the ground but finally worked. Then I did the 'columns' and those worked great too.
I don't know what in doing wrong but I can not get the reverse wire glitch to work at all. Despite watching the linked video. 😢😢
A great tutorial but I don’t think it’s workable for me on ps4. The reverse wire glitch would be incredibly awkward with my small hands. I will give it a go but don’t hold out much hope.
Why not just use ramps?
Did you build the pyramids in Antarctica 🤣
I hate this build glitching stuff.
How about make a gnarly base how you were intended to.
I’ll wait for Hello Games to adds these types of functions legitimately, until then, this shot isn’t worth learning imo.
wtf lol