Humble - Man, that Monte don't look like you don't know what you doing. Looking DAMN good Bro! Keep that content coming - it's learnings in every video you drop.
You can adjust your TV cable,it is easy. With the car not running,push the release for your detent and hold it. With the other hand open the throttle fully. Release the detent button. Your cable is properly adjusted.
Man what, that car is legit bro! You're just working on it and things are just out of place. That car is sick, keep applying that pressure! You can spend thousands on these old schools, there will ALWAYS be minor issues.
Good job bro, you're right these cars dont fix themselves. Question for you, when you're cruising along and you hit the gas, does the transmission downshift and then take off or does it stay in the gear that you're in and try to go from there?
Man, I’m going to have to get back to you on that one…I was so geeked I didn’t really pay attention to that…I will try it out and see…I don’t think it downshifts tho because I don’t have the lock-up module installed yet
you keeping your exhaust pipes where they sit at now? or running them to come out the back later on? Looks great tho, Whatd you do to get your rpms right for the highway? That's my next step for my cutlass is getting it highway ready without using up a gallon every 10 miles.
@87SSBOI that's what's up. I dig it how it's tucked away just wasn't sure if you were done with it or not. And see I got a 700r4 in mine right now and at 60 I'm pushing like 3k rpm atleast! I think I need to change my rear end gears. 🤔 I'm still learning as I go just like you. Appreciate the feedback
@@kmother19 this is the video I used to help me adjust my cable…if u don’t wanna do it yourself just take it to a trans shop…they prob won’t even charge u…it’s literally takes 2 min th-cam.com/video/uvt_r79nLIk/w-d-xo.htmlsi=Yt0D2tyVe7mJNzQ_
Them dearale fans keeping it running cool I see. What you got your temp settings on/off at? After after about 30 mins of driving in mine won’t go below 176 although I’m in this TN humidity and I got 160 thermostat. Should I switch to a 180 like you did?
@@87SSBOI 😂😂 oh alright cause man I was like well since he have it on there and found out how to do it he can show us how to take it off and put it on but I don't think your going to go through all that trouble again it would probably be to much so I would probably have to watch a video on doing that cause I be wanting to see how they do it
@@Mr.Frost181 I can tell u this…it ain’t easy if u don’t have the right tools…some things are just easier to pay someone else to do…if I knew what I was getting myself into beforehand I would have just taken the driveshaft out and took it to the driveshaft shop
@@87SSBOI 😂😂😂hey at least you manage to get it working but the only thing I got out of the video was that the van driveshaft indeed works but didn't see the actual hard work it took to get it working you left that part out 😂😂😂😂 but i enjoy every video you make bro learning experience for me that's why i stay tuned in
You’re encouragement help me as far as doing the work yourself. What type of wheels are those and the size very nice.!
lol outside!!!
I appreciate that 🫡
Lexani 24
Boy tuff always said it you doing your thing fam keep up the good work 💪💪💪💪💪💪
✊🏾👌🏾🫡
Yes sir mistress back in traffic with overdrive 👍🏿💯
Yessuh!!!
Humble - Man, that Monte don't look like you don't know what you doing. Looking DAMN good Bro! Keep that content coming - it's learnings in every video you drop.
Appreciate ya 🫡
Trouble don't last always.....you gave me confirmation with vid this morning 🙌🏾💯.....glad it was a simply fix for ya keep going #motivation
Yessir!! Let’s get it 🫡
💪🏾💪🏾💪🏾 glad you figured it out 💯💯 nothing like having someone to call to see if you on the right process
Yessir!!! 👌🏾
Always some with them old skools buy gotta love em doe
Facts! This one was on me tho 😂
@@87SSBOI 😂😂😂dont feel bad playas f### up to
Keep doing yo thang bro! Persistence pays off.
💯💯
Motivation!!! I got to drop my dash and pull the Dakota digital back out and send it back to Dakota Digital for testing !!!🙌🏾🙌🏾🙌🏾
Always something…yea I had an issue once with mine…got on the phone with them and troubleshot it and got er fixed
That boi back outside 💪🏾💪🏾💪🏾
Yes indeed!!! Took a min but I learned a lot!!! ✊🏾
Happy for you brother. You should have seen me cheesing when I figured out that the Mustang didn’t throw a rod.
Man it’s always a great feeling when excess money and/or work isn’t involved!!! 🙌🏾✊🏾🫡
I’ve been down for about 3 months…definitely a great feeling to be able to drive this thing again and now I can focus on some other projects
🗣️ AINT NOTHIN TO IT BUT TO DO IT!!! 🎯🎯🎯 Glad you got after it right away fam!💪🏾💪🏾💪🏾💪🏾
Facts!!!! Learning a lot and I’m here for all of it!!!
You can adjust your TV cable,it is easy. With the car not running,push the release for your detent and hold it. With the other hand open the throttle fully. Release the detent button. Your cable is properly adjusted.
Yes I got it figured out! It was difficult for me cause I didn’t understand and it was new to me but now I got it…definitely was easy…thanks OG 👌🏾🫡
Keep grinding bro!!!
🫡
Man what, that car is legit bro! You're just working on it and things are just out of place. That car is sick, keep applying that pressure! You can spend thousands on these old schools, there will ALWAYS be minor issues.
Facts…thanks bro
I am very glad that your driveshaft didn't come away from the differential and smack the ground. That is usually the end for the driveshaft.
Yea lucky…and the way my exhaust is ran would prob have saved it too but now I have a reason to buy a driveshaft safety loop and install it
Yessirrr 💪🏽 glad u back bro!!
🫡💯
I like how it sits though. That mug clean lol 😂 I just looked at the car sitting in that spot again lol.
🫡🫡🫡
Good job bro, you're right these cars dont fix themselves. Question for you, when you're cruising along and you hit the gas, does the transmission downshift and then take off or does it stay in the gear that you're in and try to go from there?
Man, I’m going to have to get back to you on that one…I was so geeked I didn’t really pay attention to that…I will try it out and see…I don’t think it downshifts tho because I don’t have the lock-up module installed yet
If I’m not mistaken that’s what that does but I’m not sure…
That’s an amazing feeling when u back outside
Unexplainable feeling 😀😆😄😃
@@87SSBOI I’m waiting to get my baby back
@@Mrc-vy7cnwhat’s getting done?
you keeping your exhaust pipes where they sit at now? or running them to come out the back later on? Looks great tho, Whatd you do to get your rpms right for the highway? That's my next step for my cutlass is getting it highway ready without using up a gallon every 10 miles.
No my exhaust staying as is…I like mine tucked
Changed that TH350 to a 700r4 to get RPMs down 😂😂😂…
@87SSBOI that's what's up. I dig it how it's tucked away just wasn't sure if you were done with it or not. And see I got a 700r4 in mine right now and at 60 I'm pushing like 3k rpm atleast! I think I need to change my rear end gears. 🤔 I'm still learning as I go just like you. Appreciate the feedback
@@kmother19 it’s most likely your detent cable needs adjusting bro…a 4 speed should not be running that high…could burn it up that way
@@kmother19 this is the video I used to help me adjust my cable…if u don’t wanna do it yourself just take it to a trans shop…they prob won’t even charge u…it’s literally takes 2 min
th-cam.com/video/uvt_r79nLIk/w-d-xo.htmlsi=Yt0D2tyVe7mJNzQ_
@@87SSBOI Im going to look into that man, I appreciate that. i wasnt sure where to even start when it comes to that particular issue with my car,
I kno the feeling bro!! I took my baby out for a ride yesterday and the attention is real when u cruising around
It’s crazy man…I’ve had someone follow me off the interstate to the gas station about this car..he almost got shot🤷🏾♂️
@@87SSBOI I kno that’s why every time I hop in mine I take my American Express card with me lol
Yessssir!!!! Way to get on it fam!! Glad you stopped right away to investigate💪🏾💪🏾💪🏾💪🏾
Yea man…cause it def could have been worse
🔥🔥🔥 you work on old schools?
Only mine…I’m not a mechanic…I research and try some 💩
Cool video 💪🏾💪🏾
Them dearale fans keeping it running cool I see. What you got your temp settings on/off at? After after about 30 mins of driving in mine won’t go below 176 although I’m in this TN humidity and I got 160 thermostat. Should I switch to a 180 like you did?
I have a 170° stat...and yea them Derale the real deal!!! I have mine set at 170 on, 168 off and 180 on, 175 off
176 sound good to me...I'd leave it
@@87SSBOI ok bet I’m about to go get a 170 and see what that do.
Yea it is a good temp but fan 1 runs constantly. Maybe it’s because of weather because in the early winter the fans barely cut on.
It will never get back down to 160 when the thermostat opens
Man, Can't believe you only at 8k subscribers!? Love your content, even though I do not have a G body. You A-1 on replying to your comments!
🙌🏾💯🫡
Keep going bro don’t stop
💯💯💯
Great info as always😊
I wish you would've did a video showing how you put the u-joints in and take them out so I can try it
I didn’t know what I was doing that’s why I don’t make tutorials 😂…plenty vids on here tho, that’s what I used
@@87SSBOI 😂😂 oh alright cause man I was like well since he have it on there and found out how to do it he can show us how to take it off and put it on but I don't think your going to go through all that trouble again it would probably be to much so I would probably have to watch a video on doing that cause I be wanting to see how they do it
@@Mr.Frost181 I can tell u this…it ain’t easy if u don’t have the right tools…some things are just easier to pay someone else to do…if I knew what I was getting myself into beforehand I would have just taken the driveshaft out and took it to the driveshaft shop
@@Mr.Frost181 you definitely gonna need a torch, hammer and vice tho
@@87SSBOI 😂😂😂hey at least you manage to get it working but the only thing I got out of the video was that the van driveshaft indeed works but didn't see the actual hard work it took to get it working you left that part out 😂😂😂😂 but i enjoy every video you make bro learning experience for me that's why i stay tuned in
🫡 MY GUY keep grinding‼️
Yessuh!!! On to the next 👌🏾
What stall are you running ?
Spec’d with my cam…2400-2800
Good work!
Always something but we work right thru it 👌🏾🫡✊🏾
💯🏅🏆
🫡🫡🫡
Awh man. Always something. Trouble don’t last it just pops up at the wrong time 😂but you back in the streets. 💯🫡🎬
Yessuh!!! It’s been too long but that wait is OVER!! ✊🏾
✅✅✅
🫡🫡🫡
🫡🫡🫡
Back outside boys 🫡🫡🫡
@@87SSBOI 🎯🎯🎯
YESSIRRRR MOTIVATION MOTIVATION IM BOUT 2 GO SEE IF I CAN GET MINE RIGHT 🫡💪🏾✊🏾
Get on out there n get that thang right…the streets need YOU 🫵🏾🫵🏾🫵🏾
@@87SSBOI Fasho tell em I'm on the way💪🏾💪🏾