Just what i needed, though not for the purpose of the click ball. I was struggling to think how i would get that circlip out of the windage block but your method looks good. Previous owner of the sight somehow wore out the plastic bearing on the knob on half the diameter!
The first time I used my brand new Shibuya Ultima CP Pro 400-6 Compound Sight, I turned the knob to change my elevation and the small click ball fell out. it had obviously not been assembled properly with too knob not fitted completely . After an hour of searching in the grass I finally managed to find it and reinstall it. Maybe this is the type of cheap serviceable parts, together with the springs, that Shibuya should supply as part of the kit with a new sight.
I think I'm having an issue with the locking block that interfaces with threads of the bolt of the vertical adjustment. Seems like over time maybe with the quick adjust the grooves of it may have worn down a bit so not every click moves the sight up or down. I found that the part name is UCX-15, it's for the CPX 1 sight. My question is where can I find one and what is the price ? Thank you !
Wherever you get Shibuya sights! Any of our distributors can order any part separately, and several of them stock them - I believe JVD and Lancaster have the widest variety.
Sorry we overlooked this comment! Since the tolerance of the ball hole is pretty tight it can get stuck indeed. There's no perfect answer - but blowing into the hole usually helps get it loose. If all fails, use a needle to poke a hole into the ball and pull it out. It does not need to be flawless so it will still work.
All parts are available from our dealers and distributors! However, we are just starting to ship the Ultima RC Pro sights so for the time being all the parts are going towards the complete sights.
Just what i needed, though not for the purpose of the click ball. I was struggling to think how i would get that circlip out of the windage block but your method looks good. Previous owner of the sight somehow wore out the plastic bearing on the knob on half the diameter!
The first time I used my brand new Shibuya Ultima CP Pro 400-6 Compound Sight, I turned the knob to change my elevation and the small click ball fell out. it had obviously not been assembled properly with too knob not fitted completely . After an hour of searching in the grass I finally managed to find it and reinstall it. Maybe this is the type of cheap serviceable parts, together with the springs, that Shibuya should supply as part of the kit with a new sight.
Thanks for the suggestion, we'll consider including these. And sorry for the issue! Make sure to tighten the set screws on the sides of the dial.
hi! can you use the new bolt locking for the windage adjustment of the rc III on the rc II?
Hello! Yes the knurled sight pin knob is compatible with the RCII and available separately.
What is the thread diameter and length of the knurled sight pin knob please?
I'de like to purchase one to put on my RC II sight.
I think I'm having an issue with the locking block that interfaces with threads of the bolt of the vertical adjustment. Seems like over time maybe with the quick adjust the grooves of it may have worn down a bit so not every click moves the sight up or down. I found that the part name is UCX-15, it's for the CPX 1 sight. My question is where can I find one and what is the price ? Thank you !
Hello, these parts are available via our distributors, please ask your local shop to order it from them (for example JVD). Thank you!
Where can I get that little ball
Wherever you get Shibuya sights! Any of our distributors can order any part separately, and several of them stock them - I believe JVD and Lancaster have the widest variety.
What if you forgot the spring and can’t get the click ball back out?
Sorry we overlooked this comment! Since the tolerance of the ball hole is pretty tight it can get stuck indeed. There's no perfect answer - but blowing into the hole usually helps get it loose. If all fails, use a needle to poke a hole into the ball and pull it out. It does not need to be flawless so it will still work.
Where can I find the metal sight tape?
All parts are available from our dealers and distributors! However, we are just starting to ship the Ultima RC Pro sights so for the time being all the parts are going towards the complete sights.