When I tried to adjust the marking pin, I accidentally loosened a UL-46 screw. Thanks for the video! By being able to see the inside of the sight, I was able to make sure that all 4 screws were screwed in the same way again. Thanks SHIBUYA Team & Great!
On my sight, Ultima ii 2017 model, the spring on the release lever is so horrendously stiff that I can barely move it! Can I get an easier replacement spring such as a plunger spring? Also, on my sight, the four set screws you were undoing on this video were in place so solidly that trying to loosen them actually bent the allen wrench! And the effort caused some scratching on the anodising in those recesses, which is annoying as previously I had kept my sight pristine! Any ideas?
Hello Gary, sorry to hear about your issues. The screws do have light loctite on them to make sure they don't come loose, maybe they became stiffer over the years.. Unfortunately we will not be able to fix the scratched anodizing, we're very sorry for that. Concerning the release lever spring, that does sound odd. Would it be possible to send this over to one of our distributors for inspection? Please email me at sales@shibuya-archery.com so we can figure this out for you.
Hello Paul, sorry for the delay in answering your question. The X-Lock spacers on the CPX and CP pro sights are NOT symmetrical, they have a top and bottom and we recommend clipping in the top first.
When I tried to adjust the marking pin, I accidentally loosened a UL-46 screw. Thanks for the video!
By being able to see the inside of the sight, I was able to make sure that all 4 screws were screwed in the same way again.
Thanks SHIBUYA Team & Great!
Glad to hear we helped!
On my sight, Ultima ii 2017 model, the spring on the release lever is so horrendously stiff that I can barely move it! Can I get an easier replacement spring such as a plunger spring?
Also, on my sight, the four set screws you were undoing on this video were in place so solidly that trying to loosen them actually bent the allen wrench! And the effort caused some scratching on the anodising in those recesses, which is annoying as previously I had kept my sight pristine! Any ideas?
Hello Gary, sorry to hear about your issues. The screws do have light loctite on them to make sure they don't come loose, maybe they became stiffer over the years.. Unfortunately we will not be able to fix the scratched anodizing, we're very sorry for that.
Concerning the release lever spring, that does sound odd. Would it be possible to send this over to one of our distributors for inspection? Please email me at sales@shibuya-archery.com so we can figure this out for you.
Are the windage blocks on the Ultima CPX II (365) and the Ultima CPX III (400) interchangeable?
Hello, sorry for the late reply. Yes, those are interchangeable.
Hello and thank you for the video, easy question I think: is the spacer on the new CP Pro sight also symmetrical like the RC Pro?
Hello Paul, sorry for the delay in answering your question. The X-Lock spacers on the CPX and CP pro sights are NOT symmetrical, they have a top and bottom and we recommend clipping in the top first.
How do you replace the two nylon click balls?
Hello, thanks for the comment! We have a video on how to replace the balls here: th-cam.com/video/DQ03s6bExQA/w-d-xo.html
Is it the same procedure as the rc1
Thanks for the comment, yes in this case it is the exact same procedure as the RC1.
Adjustments of the sight to show how shibuya ultimate RC II accurate