A long time ago I was installing a new clutch on my car (rear wheel drive) I din't want to take the engine out so I had to come up with a way to line up the clutch plate to the fly wheel. What I used was a broom handle, worked great
Hi from Australia. Great to see you getting the crx on the road. I did my apprenticeship on these when they were new. Plenty of late nights fitting A/C , and other accessories. Your doing an awesome job. Enjoy the process and the reward at the end. Keep up the great work 👍
Another big step has been taken! I am delighted with your work. The time will come when you finish this project and get behind the wheel to go for a ride! It will be an unforgettable feeling
Props to u for making it look so easy! I was thinking about doing the same thing to my 1991 crx dx, but haven't gotten the courage to do so... I hope to continue to see more content like this and having myself gain the confidence to try the same thing out!
Take that ctr damper off and put the b16 one back on. The reason why they come on the civic type r is because they are internally hand Balanced from the factory which the b16a are not . I promise you it will cause damage. I have been working on these for 20 plus years and I am telling you from experience.
@@joy.vanhaelen obviously we know that the motor isn’t going to hurt itself right away, but in the long term it definitely will. if you can’t get the stock on, it’s good to have an aftermarket one like a fluid damper if you plan to build the motor. Good luck with the build. Can’t wait to see more.!
Hey Joy - great work, and greetings from Ireland. Quick question - did you need to cut any of the webbing out from the bonnet / hood for it to close properly over the B16??
@@joy.vanhaelen excellent - thanks. Have a B18c6 going into mine at the moment - was originally a ZC - same as D series - and has the same bonnet. Was hoping the bonnet would fit without any cutting!
Not a lot of channels covering b16a2 motors at the moment, this gives me motivation to work on mine.
A long time ago I was installing a new clutch on my car (rear wheel drive) I din't want to take the engine out so I had to come up with a way to line up the clutch plate to the fly wheel. What I used was a broom handle, worked great
Haha that's so smart!!! I didn't even think of that, super creative 😆
Hi from Australia. Great to see you getting the crx on the road. I did my apprenticeship on these when they were new. Plenty of late nights fitting A/C , and other accessories. Your doing an awesome job. Enjoy the process and the reward at the end. Keep up the great work 👍
Thank you so much!!! That's awesome you got to work on these cars when they were new 😲 I wish mine had A/C haha
Another big step has been taken! I am delighted with your work. The time will come when you finish this project and get behind the wheel to go for a ride! It will be an unforgettable feeling
Ahhh yes, I can't wait!! 😁 I'll keep you updated on the process 👀
I will try not to miss anything😁
great job, and that is an awesome example of a crx it looks very tidy
Thank you so much!! 🤩
Props to u for making it look so easy! I was thinking about doing the same thing to my 1991 crx dx, but haven't gotten the courage to do so... I hope to continue to see more content like this and having myself gain the confidence to try the same thing out!
Ahhh thanks a lot! I'm sure you can do it too 😁 it's a really fun project to work on!
Very interesting, good project 👍.
I’m rebuilding a CRX too: a Vtec EE8 model, with Celestial Blue pearl paint .
Thank you! And that's awesome, I'd love to follow your project as well 🤩
Beautiful, and the car is very nice as well
Well thank you! haha 😀
Looking good so far. Keep us updated on how you handled wiring etc
Nice work keep it up
Thank you!!! 🤩
Good stuff, Recently dropped a JDM B16a into my prelude, bit concerned with it since it was my first ever rebuild.
Wow that's really cool!! Such a nice project. I'm sure it will run perfectly 🤩
Had to subscribe! Just picked up a b18c1 it will be my first time diving into the Honda game haha
Thanks for subscribing!! 😊 Oooo and a b18c1 is so cool, have fun with it!
watching from philipines
Thank you so much for being here!! ☺️
Hey keep making more videos of cars ❤
I will!!! 😊😊
@@joy.vanhaelen are you single bye the way i wanna get to know you more
@@joy.vanhaelen can I get to know you more if that’s ok with you and I like cars too
You're 326th subscriber, hopping in.
Yay! Thanks for subscribing 😄🤩
It's interesting that I'm here
Haha well now that you're here.. Hi! 😉
Je gaat super vlot🎉
Jaaa 🥰🥳
Awesome work 👍
Thank you so much!! ☺️
Nice work!
Thank you!!!! 😄✌️
Wow, beautiful........❤
Thank you! 😄
Omg Iam in ❤. Never wanted to get married until now 😅
Take that ctr damper off and put the b16 one back on. The reason why they come on the civic type r is because they are internally hand Balanced from the factory which the b16a are not . I promise you it will cause damage. I have been working on these for 20 plus years and I am telling you from experience.
Ahhhh that's some great advice, thank you so much!!! I don't have the original damper, but I'll definetely look for one now
@@joy.vanhaelen obviously we know that the motor isn’t going to hurt itself right away, but in the long term it definitely will. if you can’t get the stock on, it’s good to have an aftermarket one like a fluid damper if you plan to build the motor. Good luck with the build. Can’t wait to see more.!
Hey Joy - great work, and greetings from Ireland. Quick question - did you need to cut any of the webbing out from the bonnet / hood for it to close properly over the B16??
Hey, thank you so much!!! No I didn't have to make any adjustments - just fits perfectly under the bonnet! 😊
@@joy.vanhaelen excellent - thanks. Have a B18c6 going into mine at the moment - was originally a ZC - same as D series - and has the same bonnet. Was hoping the bonnet would fit without any cutting!
Very nice 0:26
you have a car lift, should have put the engine form the bottom, just much easier.
I need a F23A 1:03
Don't remove the front bumper when you become an expert swapper
Hopefully one day I will become an expert swapper! Haha 😋
I just bought a crx can u help me put it together 🚗
I'm sure you can do it!!! Cool that you bought a CRX 🤩
Are you in America 0:49
I came here to stare at the mechanic.