If youre using a gun doing over 400fps then you should not be using .20 bbs and then complain about consistency...especially not if you're dong 450..Try using .33 AT LEAST, you will have a much better time.
Good point... also it could be the inner barrel of the suppressor doesn’t match the inner barrel height, and so if the barrels don’t match, the result is the bb’s will snag on the shorter/longer barrel, causing the bb’s to have a scattering effect and/or a wider spread than normal
Airsoft Incompetence What I did after this video was I took out the inner barrel from the suppressor so that I keep the look but I don't lose accuracy. Also, I just wanted to say thanks for commenting on all my videos. It just occurred to me that I haven't watched your channel in a while so I just swung by there and caught up.
Gotta strip the paint of the orange tip for a better fit. Most people you see getting it on no problem most likely have all black tips cause the have stripped the paint off. The paint being left on makes for a super snug fit. Also btw that vector is the sexiest thing Ihave ever seen.
Shadow Walkers I actually did strip the paint down past the orange (I had black on top), right down to the silver metal. Still had problems. Here are some other picture of the Vector: i.imgur.com/j2Q9D91.jpg i.imgur.com/ewublXb.jpg i.imgur.com/ZoS8jXA.jpg and another gun i.imgur.com/BUH0jOX.jpg
I put the the suppressor on my mp7 and what I used for the inner barrel was a hollow pen tube lol, glued it in there and the gun somehow shoots way father and super accurate like more accurate than stock and it’s consistent, sadly this works better than these “ power up “ things and it’s cheap lol
Not sure if you'll respond, but I'm wondering if you've used a cqb valve in the vector with a power up suppressor to get that sort of "sweet spot" in the fps. I have the dangerwerx valve for it but not the suppressor
Bra, that thing at the end of your gun, that orange flash hider? I think you forgot to remove that, maybe I'm wrong. The suppressor is turned into the front, not jammed in
+myzteryhellz a better options would be to get tight bore longer barrel and attach an aluminium or plastic light suppressor so the gun will still cycle and cover the longer barrel.
![กี่หมื่นฟ้า | Your Sky Series EP.1 [2/4]](http://i.ytimg.com/vi/qJbQs_nhjD4/mqdefault.jpg)
Hey buddy thanks for reviewing, I ordered one for my VR16 Avalon Calibur M4, I got the Power Up one.
How did it work on the avalon?
your guns are insanely tactical looking!!!
Love your wall setups bro
If youre using a gun doing over 400fps then you should not be using .20 bbs and then complain about consistency...especially not if you're dong 450..Try using .33 AT LEAST, you will have a much better time.
Good point... also it could be the inner barrel of the suppressor doesn’t match the inner barrel height, and so if the barrels don’t match, the result is the bb’s will snag on the shorter/longer barrel, causing the bb’s to have a scattering effect and/or a wider spread than normal
The Mp9 fully tact out looks sick
I agree.
Airsoft Incompetence What I did after this video was I took out the inner barrel from the suppressor so that I keep the look but I don't lose accuracy. Also, I just wanted to say thanks for commenting on all my videos. It just occurred to me that I haven't watched your channel in a while so I just swung by there and caught up.
Cool thanks dude, I'm going to make a shooting vid of the beta and gameplay eventually
is there not a little slide type button underneath you have to pull back for the barrel to pull back a little then you let it go when its twisted on
Gotta strip the paint of the orange tip for a better fit. Most people you see getting it on no problem most likely have all black tips cause the have stripped the paint off. The paint being left on makes for a super snug fit. Also btw that vector is the sexiest thing Ihave ever seen.
Shadow Walkers I actually did strip the paint down past the orange (I had black on top), right down to the silver metal. Still had problems. Here are some other picture of the Vector:
i.imgur.com/j2Q9D91.jpg
i.imgur.com/ewublXb.jpg
i.imgur.com/ZoS8jXA.jpg
and another gun i.imgur.com/BUH0jOX.jpg
I put the the suppressor on my mp7 and what I used for the inner barrel was a hollow pen tube lol, glued it in there and the gun somehow shoots way father and super accurate like more accurate than stock and it’s consistent, sadly this works better than these
“ power up “ things and it’s cheap lol
Nice video...... where can I but that power up suppressor and the rail cover?...... I have the krytac kriss vector...... thx
Try a heavier grade bb and they'll be more accurate
Heeey it’s sal from impractical jokers.
The power up supporessor for KWA Kriss Vector, will this work on KWA MK23 socom pistol?Both have 16mm thread.Thanks
will this work through a 6.3 inner barrel?
Anybody knows if the KWA Supressor will fit on a WE SMG 8 ?
Not sure if you'll respond, but I'm wondering if you've used a cqb valve in the vector with a power up suppressor to get that sort of "sweet spot" in the fps. I have the dangerwerx valve for it but not the suppressor
No cqb valve.
heavier bbs will help because your bbs are too light for how much power you have
what internal upgrades have you done with the vector?
None.
Bra, that thing at the end of your gun, that orange flash hider? I think you forgot to remove that, maybe I'm wrong. The suppressor is turned into the front, not jammed in
That part doesn't come off.
How did you make those wall mounts?
home depot
@@airsoftincompetence I finally have a reason to go there, Thanks!
Have you done anything else to improve performance on Kriss Vector or just the power up suppressor?
+Terek Cope Just the suppressor. It works really well as a mid-semilong range DMR.
+Airsoft Incompetence and that was a angel custom long not an angry gun brand?
right
could this work on we tech g 17?
+myzteryhellz Sorry, I don't know.
+myzteryhellz a better options would be to get tight bore longer barrel and attach an aluminium or plastic light suppressor so the gun will still cycle and cover the longer barrel.
No
can i use it for kwa sr7?
Tornike Meladze no
U made that vector ugly y tf u put a snipe scope on a sub🤦🏾