I'm happy with mine, the 12pb. I just wish I had the self propelled feature because my yard is sloped. I also wish the wheels were metal. The guards would be nice as well as the hole to clean with a hose. The electric start would be nice too. But I'm happy with my 12pb, which is 11 years older than yours and carries the older B&S engine, so just as bulletproof and overbuilt. My whole mower is aluminum so there's no corrosion in keeping it on my back porch. And it's so well built that it starts and stays started and running with little to no work and maintenance.
Good information. I bought my JX75 new in 1998. I had a 1/2 acre yard and the “JX” did a great job of maintaining it. I installed the spin off oil filter kit a few months after purchase for some additional engine protection and did the JD tune-up-in-a-box kit every Spring. The mower was completely reliable and an excellent performer. One question I have regarding your comments on bagging and mulching performance. Are you using the high lift blade for bagging and swapping in the mulching blade for mulching? I noticed a considerable difference in performance when using the incorrect blade for the task.
@@doggerracing5243 I just use the standard blades. I tried a mulching blade before on it and it didn’t seem to mulch any different. Thanks for sharing about yours!
Also, I wish that mine had more power and maybe a bigger deck because I like my lawn low, but it bogs down if the grass is too high, and I like to cut every two weeks. But hey, idk why yours throws such large clippings, mine doesn't, and yours has 2 more HP than mine. Maybe sharpen the blade and clean it well, keep the deck low, and the grass not too high, run the engine at max power, and walk slower, maybe you'll get better results if you're not already.
Had two of them in mint condition this spring, one with a Briggs Quantum and one with the awesome ‘saki engine. Loved everything about them EXCEPT: 1) Couldn’t feather the drive, when you pull the lever it’s 0 to 60 burnout time on the lawn unless you want to select a speed at the end of every row, and 2) only goes to 3 1/2” cutting height and I needed 4” in summertime. Sold them both to a landscaper, other than those two issues they were nice though.
I bought my '93 14SB used in summer of "94 for $325. It's a JX75 with silver deck😀 Over the years I've put one belt on it, a couple of shift cables, BBC bearing and friction disk and one pair of new wheels. It has the oil filter option, and I run a Toyota/Denso F2/N1 filter same filter as my wife's '05 Prius! Cheap (currently Supertech) 5w30 full syn gets changed every other year. I know I should change the oil yearly, but then again, I should probably swap out the ORIGINAL spark plug, too😂😂... Great vid, these are the greatest walk-behinds ever built.
Great video, I just was gifted one of these by a friendly neighbor, it has some issues with the drive mechanism. It looks like someone tried to rebuild it, but forgot some keys for the drive shaft and gears. Mines from 95, and the old owner said he thinks the carb should be good. Really excited now to see if I can get it going
Really miss my JX75. Watching the video reminded me of all the issues I did have orver the life of it. 1) Replaced the thrown piston rod 2) Replaced tires 3) Engine Cluch was stuck, and always engaged (this is the one I couldn't fix and ended up selling it), 3) random replacments like broken gas cap. As much as I loved it, getting parts was a pain.
This variant is an aluminum deck, they're relatively lightweight. But there's an even lighter weight variant out there for commercial use, which I also wish mine was. But they're all not too heavy. A modern mower or an older mower that's comparable has more weight to it, so you will get tired. With mine, even without self propelled, I'm not too tired, but my yard isn't that big thankfully, but it is sloped.
Highly Recommend Jx75 or 14sb if you’re willing to take on restoration project. We have sold off all our name brand commercial new mowers and went all vintage John Deere mowers in my lawn service and can’t be happier with the quality of cut and the reliability of 25-30yr mower. Like the old saying goes they dont build them like they used to.
@@GarageGear I found a solution. The original Flanged sleeve bearing on 14sb, jx75 and jx85 mowers the length of the sleeve is 1/2 in, majority of the wheel bolt is on the Ball bearing, with the sleeve so short it is causing the bolt to have movement and eventually breaking the bolt. The solution to this problem was buying 1/2 in Bore, 5/8in OD and 1in Length Flanged sleeve bearing. Model # EF081016 Knocked out the existing sleeve with a punch and hammer the new one in. Since the new sleeve is double the length (1in) it gives the bolt more support and depends less on the ball bearing. since the flange is thicker than the original. I had to remove the plastic wheel covers because with two washers plus the plastic covers there wasn’t enough length of the wheel bolt to screw in. To fix that problem I removed both covers and use the same two washers on both wheels. Plus it helps me keep the wheels and gears clean since I have access to wash it out regularly, used to get clogged up with grass when covers where on.
Hi JB. Very nice TH-cam channel and a most instructive video. It's rare to see enthusiasts guy like you😃 From the start, I was mowing with a Kubota W4021 from 1985 but which broke down 15 days ago. Some parts being very complicated to find and the model being quite old, I did not want to incur costs on it. So I decided to look for a second-hand mower and that's when I came across your awesome video JB. So I found a 1998 JX85 with the famous 'saki FC150V engine, not used a lot and which has just been serviced. It looks like it come out from the dealership like in 1998 😎
I have the JX75, THe blade control lever broke, it won'rt start, some peeling paint, and I think the transmission sticks on it (won't move not sure of stripped) I always loved the mower and first one I bought. Haven't used it in 8 years. I live in the Central New York area and would like to get it all fixed and possibly painted. who to go for that? Does anyone have suggestions? I guess the Deere dealer but you all know how that goes and someone may love working on it there but looking for a person who has passion for the deere mower.
@@GarageGear take that back does start but not run well. no engament on mower blade due to broken shifter. transmission sticks when pulling backward when off.I'll have to pull it out and look it over again. I always like the mower when I used it then I realized I can be lazy and just use the deere rider for everything. :o) anyone in the Syracuse to western region that does repaint and repair or just usually stick with a dealer? Hear it's Cazenovia Equipment; they have several location and been around for over 50 years
In 2015 I gave mine away free as I was moving to my new house and bought an ego. I just gave it to one of the guys who mowed lawns in our neighborhood. I used to take it for service every year so it was in perfect shape. Just figured I wouldn't be mowing a big yard with self propelled and had the new ego for the back up. What an idiot I was, as I bought a Honda this year to do my backyard by myself since we have a pool now and don't want clippings blown into the pool. I had the electric start too for the wife to use in case I was away and she needed to mow (she's only 4' 11 and cant pull a mower to start it being so short). 😭
JB, It would be a sin to part out that JX75. I know you have several Mowers available to you but that thing is too good not to use and enjoy for the next 23 years.
I broke my handle by tightening too much it would cost $200 to replace, and my mower was 14pt push so I decided to buy new Honda self propelled. After 3 years in September my Honda blew up I had to go back to my John Deere and it stared up with fresh gas after a couple of pulls. It also comes with a tube for the oil change goes past the deck no spill. Bought a used Ariens lawn mower Kawasaki engine that is a beast too much engine with an oil filter.
Bought my JX75 in Sept. 1998 for $805. $20 for the oil filter adapter. Mower still works the same and starts on 1st or 2nd pull. Had to replace the float needle valve in 2007. Otherwise it was worth every penny and then some. Amsoil 10w-30 since 2003 and change the oil every 2 years. Oil still looks clean after 2 years. I sometimes remember to check the oil level. It is full when I do. Wife doesn't like it due to weight. Thanks for pointing out the handle bolts needing to be tightened frequently. Haven't checked in over 10yrs.
I did forget to mention that after 3yrs the valve cover leaked on bottom left bolt. Tried to tighten it but it was stripped. Talked to the shop I purchased it at and they mentioned it can only be fixed by replacing the head. I went to Autozone and purchased a drill, tap and helicoil kit for less than $10. Bolt has held tight since and oil only seeps a couple drops per season. Probably should have put a new gasket on. @@GarageGear
JB-LOVE THIS MOWER! (Have several myself so of course I would say that)... everything you said was spot on...EXCEPT: your height adjustment information was a bit misleading - the further forward you put the height adjusters (on the front the I position) is the highest cut height (approx 3.5") and the III is the lowest setting (near tee box height)...I liked that you mentioned the skid plates as an upgrade - I would also recommend finding and installing the spin-on oil filter kit...more oil/better cooling/longer oil life/better filtration...no point keeping the Honda or the Toro with that JD! If anyone wants to discuss this line of mowers more - pls comment and we can get a discussion going...as JB said - if you find one in good shape for little money - BUY IT...even with the parts from a JD dealer (which mine Crossroads Equipment-has been excellent and fairly priced), you will spend LESS than a new Personal Pace Toro with a chinese clone engine and have a way better mower in EVERY respect (except maybe the mulching finish-I will be exploring mulching blades and may make a video on this once tested) The heft of the OEM blades is incredible - but as JB says they bag THE BEST...I also rear discharge to get better better dispersal than the side chute - BUT do so at your own risk...I have a few TH-cam videos on these mowers and links to others if anyone is interested let me know...Great video as always JB!
Appreciate you sharing all this info Kirk! I wasn’t sure on the exact heights of the mower deck and after looking them up 3.5 inches kept coming up but hey if it goes to four inches even better! 👍 that spin on oil filter is another nice feature if you can find one!
@@GarageGear have a great day JB! Sadly, I came up pretty empty-handed on a search for the oil filter adapter also...I was hoping to find out the Kawasaki 180cc adapter would fit on the 150 engine but it doesn't look like it does... frequent (50hr) oil changes should keep these amazing engines running for a long long time (like starting first pull after 20+ years isn't already remarkable!) Cheers my friend!
Morning JB. I’d definitely hang on to that beast! They don’t make them like that anymore. I had the JD silver anniversary edition that I think bought in early 1990’s. It came with a hose that connected to the oil discharge so that it didn’t spill oil on the machine. My Niece has it now and still runs like Deere. What’s up for the weekend? Cheers buddy!
Morning JB. Running some errands then probably watching the Bills game. Oh, and watering the front lawn. Had it aerated and over seeded last week. Enjoy the rest of the weekend buddy! GO BILLS!
Hi JB also there is a drain hole on these I forgot to mention that before you just put the hose on the deck run the water and start the mower on its lowest deckheight and it will do the rest to wash out the deck underneath, yes these engines are the best, like I said before this is the last mower you will ever need to buy ever.
I've always liked spiral shaped decks for vacuuming clippings, there seems to be a trade off on them between suspending the cut clippings for multiple cuts vs vacuum/speed of cut clippings. Your Deere would probably excel at thick or tall grass. I wonder if a dual blade (like Honda uses) could provide the best of both worlds?
The factory blade gets really good vacuum and leaves a superior cut when bagging or if clippings are not too long discharging...I will be trying to find a mulching blade that fits as that is the weakest aspect of cutting - the Super Recycler does this the best in my experience
JB, the FC150V is only 153cc. How does this compare to a 190cc Briggs intek that I have on my JS63? Just bought one of these for $50...it starts, but doesnt stay running. The only thing the owner mentioned was the self propelled is intermittent and not gaining much traction when on any sort of incline. I'm not sure if I fix this up to sell or keep it and sell my JS63
Hey killaman! The 153cc FC is plenty of power and far better built than the briggs. Don’t let the numbers fool you. If you clean the carb she should be good to go! I have a video on that that I filmed a long time ago. I would also check the gears inside the wheels to make sure they are in good shape. That might be where the problem is. Typically those transmissions are bullet proof. 👍
@@GarageGear hey man, thanks for the response! I will check all of that today. I'm hoping it's not the drive belt...that looks to be a pain in the ass to replace
@@GarageGear JB, I took a look at the mower...the self-propelled was working fine for me. Going up inclines and all. Not sure what the guy was talking about haha
JB you have an old school Toro, old school Deere. Now your next mission should you choose to accept it is find a Snapper. Another old school well built mower. I had one years ago and traded it in . High Vac rear Bagger, big rear wheel rear drive aluminum deck.👍
Looking for new mower but something that can easily go down to 3/4 inch or lower. Currently use a reel mower for extra low but this time of year I let it grow a bit taller like to hit it with a good push mower. Models that cut low?
@@GarageGear actually found 14 in stock nearby landscaping supply they are doing the recall fix and will be available next week. I'm getting the HRN216VYA. Really like the handle, ball bearing wheels larger diameter and bigger engine on the HRX yet I don't want the plastic deck.
It’s difficult to get paint to adhere to aluminum . U can use primers after prepping the surfaces to get the paint . I had aluminum horse trailers and utility trailers . They were great towed like they weren’t there . If there as a problem it was the paint chipping or peeling
I buy my JX75 for $45 because the previous owner buy a new honda mower. Dont know how work the honda but my $45 JX75 work 100% fine and start at the firs pull. I cut 5 yard every two week with its and its work great
I have one with John Deere lawnmowers, but it is a brick and truck and engine but I already know how to fix it. I’m just watching this video for entertainment.
That’s a tough question! That’s gonna be between some Hondas, toro super recyclers and John Deere’s between the ninety’s and early 2000’s! Some say lawn boys were really good but never used them. I was always a big fan of the toro super recycler from the late 90’s.
Hey man great video...quick question...have you ever worked on one that didn't utilize an igniter module for the ignition?? I have one that is missing the igniter but not sure if it was there from factory...
@@danielprocita9547 hey Daniel! The older 14SB 14SE models had igniter modules or spark boxes that were separate from the magneto. The jx75 model had it built in.
Have just started my own run of gardens in scotland, looking at one of these second hand online at a great price, this video has been very helpfull and ill be going for it tomorow now, thanks dude
I love my JX75. I have noticed an issue - the drive belt keeps falling off the pulley. Any thoughts on (a) why this is happening, and (b) any potential solutions? Thanks!
Hey Matt! I wonder if the belt guide isn’t tight enough on the sides of the transmission. Perhaps press them in a little. That should help keep the belt on better. Thanks for watching
@@guitarplayer5611 the old John Deere’s are definitely better! They were built to last! Their only weak point is their blade brake clutches. Which aren’t impossible to swap out just expensive.
@@GarageGear Thanks Kindly! I see the JX75, JX85, 14JA,JX,JZ. I am a bit confused on the different models of the old John Deeres. I have looked for a reference guide of some sort, but haven’t har any luck. Would you mind sharing which of the older models you feel were best and maybe some differences between them and the years produced for each model. Really appreciate your videos! Excellent content!
@@guitarplayer5611 the 14SE and 14SB modes were around in the 1980’s and 90’s. The JX85 and jx75 were around in the late 90’s and early 2000’s all excellent models to keep an eye out for.
I have a 14se that needs a new throttle housing but mine still works for time being. The blade clutch works only this that I haven't tried is the starter as like you said it starts right up. I love the machine overall.
Hi JB. What is your opinion of the 33 in Cub/ Dewalt/Craftsman walk behind mower? I have a Timemaster and ready like it but this one looks good without spending a bundle of money on a commercial 36 in walk behind. Thanks for your opinion!!!
I’m gonna look more into this mower but right off the bat anything craftsman nowadays is usually junk. Worth a look though to learn more about it. Have a good weekend Paul!
Hey Yankee! Probably $150-$200. If it’s it’s got some newer parts on it perhaps a little more. They’re worth the money and worth far more for the parts! 👍
@@GarageGear Lol I thought so! There's a guy on eBay that's selling 2... at $700 a piece!!!! Talk about shooting for the moon! Thanks for the reply! 😂🤣😅
Awesome stuff, JB. I fondly remember the days when companies made solid products with user-friendly features for home owners at reasonable prices...... So when is this "blindfolded carb rebuild" vid coming out?? 🤪😛🤣
They made some seriously great mower back in the day! I should do that video! Probably would be hilarious! Carb cleaner everywhere but the carburetor would be clean lol! Great idea bud! Enjoy your weekend!
Don’t ever sell that mower! I have never figured out why Deere dropped them. The commercial version was right up with Toro commercial. They literally disappeared overnight. Which is what will happen to Honda mowers.
One of the best mowers ever made. I have one but the blade clutch failed and I bought a new Toro from Ace Hardware. I quickly realized it was a piece of crap and paid for the expensive fix to get the JX 75 running again.
Hey Tery! This one is staying with me! You’ll find one. Keep an eye out and don’t be afraid to drive a little ways to grab one! Worth the drive! 👍 happy hunting!
JB!! I Got An Oil Leak - But First Things First How The Hell Are Ya?? I Hope All Is Well. I got a small issue with the snowchucker and the long/short is - my classy aged neighbors across from my moms house that i take care of as well has each become widows over the past 4 months. Breaks My Heart - But I am going to Keep My Commitment. (1 usually goes to Fla. But she'll be home she is in bad shape the other good but lonely i just visited her and brought dinner for her and my mom and I). I got an Oil Leak ripping outa possibly a connection line. I took a video. Hmmm...how would i send you or get ya the video? I can post it on my youtube page for 24hrs or until ya see it and then remove it? I hope you had a great summer with the Wife and did some cool stuff. I have been in the hospital. S2a ghastric stomach cancer. So, im gunna keep going till i drop. I wish ya were my neighbors. I hate the ones on my direct sides theyre such ugh....Ones named Karen (no lie). Thanks JB ~Pete
Hey Pete it’s been a while! Sorry to hear about your neighbors and you battle with stomach cancer! I hope you’re feeling alright at the moment and that any treatments you are undergoing are helpful. You’re in our thoughts and prayers my friend! Things are going well here. Gearing up for a busy snowblower season! As for your leak you can send me a video via email or Instagram (garagegearjb). My email is in the description. I’ll try to help you out as best I can! Don’t let that Karen get to you lol! 👍👍
So I have a question, I’m looking at a 1996 Jx 75, almost brand new for $950 Is there great parts availability for these, and is it worth this price ? It is the 6 hp Green machine. Thanks
Hey pump! Parts are still available for these! Prices are usually on the higher end for parts. Sometimes you can find a deal on things. $950 seems ok if it has low hours on it considering what new quality gas mower prices go for but I would check under the deck. That will tell you a lot. If it’s worn or the blade brake clutch looks pretty rusty it’s got some time on it. Check those out if you can and let me know. Email me some pics if you can I’d love to see it! 👍
@@GarageGear hey, this guy says he’s had it since new, and it’s never even had gas or oil in it! I asked him if i can see a video of it running, but he’s like.. he don’t want to put oil or gas in, because it wouldn’t be NEW anymore.. sounds like a great buy, my concern is if it never had oil in it, is internal cylinder wall going to have some moisture?? How can i send u pics?
@@ppump24valve53 really? Wow! I wonder about the cylinder too. Might have rust forming on it. Maybe less if it’s been placed at top dead center. Perhaps you could pull the cord to see how free she moves? I would have stored it for 20 plus years with some oil in it. My email is in the video description. Can’t share it here or I’ll get spammed.
I picked up originally 2 john deere A s82 and a rx75 for free But the guy gave me 2 extra mowers free which was a je75 and a commercial toro with a kawasaki
Hey Mario! Yes and no. Sometimes I see parts available and other times no especially on eBay. They are 20+ years old though so it is getting tougher! Thanks for watching
I had a customer bring me one of these yesterday (5-7-2024) said it throws the belt off. The only problem I can see. Is they aren't using the grass catcher, causing the grass to build up on top of the transmission and getting between the belt and transmission pulley.
Hey Bert. Are the belt guides wide open? There are some belt guides that may be too loose on each side and can be pressed in just a little bit. Also is the belt too loose?
@@GarageGear No sir. The belt guides seem to be in good position. I have used the machine myself and there wasn't a problem. The way I understand, it was taken to a John Deere dealer they looked at it and refused to work on it. They did put the belt back on. So if they readjusted the belt guides I don't know. I'm still thinking they were running it without the grass catcher. I'm planning on running it again today with some tall grass to see if it comes off. I know it says do not prop open the chute . However that may be the problem. I will also call the customer to be sure I under what conditions the belt comes off. The husband dropped the mower off and told me what his wife told him. When asked other questions, he didn't know. The mower looks like new a 2002, the belt looks good, when engaged the belt is tight. That's a great engine, you are correct about that. Thank you for your response it is greatly appreciated. I will let you know what I find. Again thanks for your response.
@@bertgrau3934 thanks for sharing this Bert! I would just pinch in those belt guides a tiny bit and see how she does. I can’t imagine any other way that thing is coming off. 👍
@@GarageGear I wound up replacing the belt, the pulley on the transmission as packed with grass. I cleaned it out. And I used the mower for about an hour no problems. I cleaned it out and it looks good. I did readjust the cable for the transmission. Not sure if that helped or not. My customer will pick it up tomorrow. I will help him if he has any problems. I am impressed I is a good mower. I did sharpen the blade while I had it off. Thanks for your input, it was helpful
Good video. I have this mower and it is a tank and starts on the first pull. I have a question though, I am doing the service on it and bought an oil filter but don’t see an oil filter on this one that I have. Do some models not have oil filters? Thanks!
@@greadore some models don’t have them. This video explains it 👉3 SUPER RARE PARTS For John Deere 14SB JX75 Lawn Mowers th-cam.com/video/zB9NGmDZVgU/w-d-xo.html
Changing to the newest part number drive lever & cable fixes the problem with them breaking. Some of the aftermarket cables are good quality although I did get one that had nuts that were too small.
@@robertvanvikskjstad7509 hey Robert! Great that you’ve had it that long and that the clutch lasted that long. Thanks for being a cool fan from far away!
Funny i just bought a commercial snapper hi vac with this motor for 85$ all it needed was a carb clean and now it runs great. It cuts better then my toro recycler too
Just scored 3 14sb for free! Ordered a pair of a wheels and a spur gear. Will do a deep clean an regular maintenance. Will keep this baby for a back up mower.
Hello JB. Question, do you know if a grass bag from a 14SB, 14SE will fit a JX75 mower. I found one for sale but I need to know if it will fit. Thanks for your time.
Just had a friend give me two je75 mowers. Said they ran when put away a few years ago. Checked oil in the first and put fuel in and it fired right up.
I'm happy with mine, the 12pb. I just wish I had the self propelled feature because my yard is sloped. I also wish the wheels were metal. The guards would be nice as well as the hole to clean with a hose. The electric start would be nice too. But I'm happy with my 12pb, which is 11 years older than yours and carries the older B&S engine, so just as bulletproof and overbuilt. My whole mower is aluminum so there's no corrosion in keeping it on my back porch. And it's so well built that it starts and stays started and running with little to no work and maintenance.
@@Helpline5815 thanks for sharing helplines
Good information. I bought my JX75 new in 1998. I had a 1/2 acre yard and the “JX” did a great job of maintaining it. I installed the spin off oil filter kit a few months after purchase for some additional engine protection and did the JD tune-up-in-a-box kit every Spring. The mower was completely reliable and an excellent performer. One question I have regarding your comments on bagging and mulching performance. Are you using the high lift blade for bagging and swapping in the mulching blade for mulching? I noticed a considerable difference in performance when using the incorrect blade for the task.
@@doggerracing5243 I just use the standard blades. I tried a mulching blade before on it and it didn’t seem to mulch any different. Thanks for sharing about yours!
Also, I wish that mine had more power and maybe a bigger deck because I like my lawn low, but it bogs down if the grass is too high, and I like to cut every two weeks. But hey, idk why yours throws such large clippings, mine doesn't, and yours has 2 more HP than mine. Maybe sharpen the blade and clean it well, keep the deck low, and the grass not too high, run the engine at max power, and walk slower, maybe you'll get better results if you're not already.
@@Helpline5815 thanks for sharing
Had two of them in mint condition this spring, one with a Briggs Quantum and one with the awesome ‘saki engine. Loved everything about them EXCEPT: 1) Couldn’t feather the drive, when you pull the lever it’s 0 to 60 burnout time on the lawn unless you want to select a speed at the end of every row, and 2) only goes to 3 1/2” cutting height and I needed 4” in summertime. Sold them both to a landscaper, other than those two issues they were nice though.
Thanks for sharing my friend!
I bought my '93 14SB used in summer of "94 for $325. It's a JX75 with silver deck😀 Over the years I've put one belt on it, a couple of shift cables, BBC bearing and friction disk and one pair of new wheels. It has the oil filter option, and I run a Toyota/Denso F2/N1 filter same filter as my wife's '05 Prius! Cheap (currently Supertech) 5w30 full syn gets changed every other year. I know I should change the oil yearly, but then again, I should probably swap out the ORIGINAL spark plug, too😂😂...
Great vid, these are the greatest walk-behinds ever built.
Awesome my friend! I just Knabbed an oil filter assembly for my JD! Gonna install it in the spring! 👍
Great video, I just was gifted one of these by a friendly neighbor, it has some issues with the drive mechanism. It looks like someone tried to rebuild it, but forgot some keys for the drive shaft and gears. Mines from 95, and the old owner said he thinks the carb should be good. Really excited now to see if I can get it going
Really miss my JX75. Watching the video reminded me of all the issues I did have orver the life of it. 1) Replaced the thrown piston rod 2) Replaced tires 3) Engine Cluch was stuck, and always engaged (this is the one I couldn't fix and ended up selling it), 3) random replacments like broken gas cap. As much as I loved it, getting parts was a pain.
Parts are pricey for these and sometimes hard to find that is for sure! Thanks for sharing
YOU NEVER WASHED AND WAXED THAT SEXY THING, ABUSED IT, NO GARAGE KEEPING...SADNESS. LOL
This variant is an aluminum deck, they're relatively lightweight. But there's an even lighter weight variant out there for commercial use, which I also wish mine was. But they're all not too heavy. A modern mower or an older mower that's comparable has more weight to it, so you will get tired. With mine, even without self propelled, I'm not too tired, but my yard isn't that big thankfully, but it is sloped.
Thanks for sharing helpline
Highly Recommend Jx75 or 14sb if you’re willing to take on restoration project. We have sold off all our name brand commercial new mowers and went all vintage John Deere mowers in my lawn service and can’t be happier with the quality of cut and the reliability of 25-30yr mower. Like the old saying goes they dont build them like they used to.
They sure don’t build them like they used to my friend! Very cool you went back to the old stuff!
@@GarageGear I found a solution. The original Flanged sleeve bearing on 14sb, jx75 and jx85 mowers the length of the sleeve is 1/2 in, majority of the wheel bolt is on the Ball bearing, with the sleeve so short it is causing the bolt to have movement and eventually breaking the bolt.
The solution to this problem was buying 1/2 in Bore, 5/8in OD and 1in Length Flanged sleeve bearing.
Model # EF081016
Knocked out the existing sleeve with a punch and hammer the new one in. Since the new sleeve is double the length (1in) it gives the bolt more support and depends less on the ball bearing.
since the flange is thicker than the original. I had to remove the plastic wheel covers because with two washers plus the plastic covers there wasn’t enough length of the wheel bolt to screw in. To fix that problem I removed both covers and use the same two washers on both wheels. Plus it helps me keep the wheels and gears clean since I have access to wash it out regularly, used to get clogged up with grass when covers where on.
@@HiddenZeroJs awesome tip here my friend!
Hi JB. Very nice TH-cam channel and a most instructive video. It's rare to see enthusiasts guy like you😃
From the start, I was mowing with a Kubota W4021 from 1985 but which broke down 15 days ago. Some parts being very complicated to find and the model being quite old, I did not want to incur costs on it. So I decided to look for a second-hand mower and that's when I came across your awesome video JB. So I found a 1998 JX85 with the famous 'saki FC150V engine, not used a lot and which has just been serviced. It looks like it come out from the dealership like in 1998 😎
Awesome my friend! Welcome to the channel! 👍
I have the JX75, THe blade control lever broke, it won'rt start, some peeling paint, and I think the transmission sticks on it (won't move not sure of stripped) I always loved the mower and first one I bought. Haven't used it in 8 years. I live in the Central New York area and would like to get it all fixed and possibly painted. who to go for that? Does anyone have suggestions? I guess the Deere dealer but you all know how that goes and someone may love working on it there but looking for a person who has passion for the deere mower.
@@aprecott these are some tough questions my friend! You may have to rip it all down for someone to possibly repaint/repair it
@@GarageGear take that back does start but not run well. no engament on mower blade due to broken shifter. transmission sticks when pulling backward when off.I'll have to pull it out and look it over again. I always like the mower when I used it then I realized I can be lazy and just use the deere rider for everything. :o) anyone in the Syracuse to western region that does repaint and repair or just usually stick with a dealer? Hear it's Cazenovia Equipment; they have several location and been around for over 50 years
@@aprecott got it! I don’t know who would be able to help you out out that way but perhaps someone can chime in here and let you know.
In 2015 I gave mine away free as I was moving to my new house and bought an ego. I just gave it to one of the guys who mowed lawns in our neighborhood. I used to take it for service every year so it was in perfect shape. Just figured I wouldn't be mowing a big yard with self propelled and had the new ego for the back up. What an idiot I was, as I bought a Honda this year to do my backyard by myself since we have a pool now and don't want clippings blown into the pool. I had the electric start too for the wife to use in case I was away and she needed to mow (she's only 4' 11 and cant pull a mower to start it being so short). 😭
Thanks for sharing this! 👍👍
Haha good story
JB, It would be a sin to part out that JX75. I know you have several Mowers available to you but that thing is too good not to use and enjoy for the next 23 years.
Not ripping it down Jeffrey! Don’t you worry! She’s too pretty! Lol!
I broke my handle by tightening too much it would cost $200 to replace, and my mower was 14pt push so I decided to buy new Honda self propelled. After 3 years in September my Honda blew up I had to go back to my John Deere and it stared up with fresh gas after a couple of pulls. It also comes with a tube for the oil change goes past the deck no spill. Bought a used Ariens lawn mower Kawasaki engine that is a beast too much engine with an oil filter.
Those older ones just last!
Bought my JX75 in Sept. 1998 for $805. $20 for the oil filter adapter. Mower still works the same and starts on 1st or 2nd pull. Had to replace the float needle valve in 2007. Otherwise it was worth every penny and then some. Amsoil 10w-30 since 2003 and change the oil every 2 years. Oil still looks clean after 2 years. I sometimes remember to check the oil level. It is full when I do. Wife doesn't like it due to weight. Thanks for pointing out the handle bolts needing to be tightened frequently. Haven't checked in over 10yrs.
Awesome my friend! Thanks for sharing this info with the community! Those mowers are amazing! 👍
I did forget to mention that after 3yrs the valve cover leaked on bottom left bolt. Tried to tighten it but it was stripped. Talked to the shop I purchased it at and they mentioned it can only be fixed by replacing the head. I went to Autozone and purchased a drill, tap and helicoil kit for less than $10. Bolt has held tight since and oil only seeps a couple drops per season. Probably should have put a new gasket on. @@GarageGear
@@recycledpaul9728 awesome you were able to fix it my friend!
JB-LOVE THIS MOWER! (Have several myself so of course I would say that)... everything you said was spot on...EXCEPT: your height adjustment information was a bit misleading - the further forward you put the height adjusters (on the front the I position) is the highest cut height (approx 3.5") and the III is the lowest setting (near tee box height)...I liked that you mentioned the skid plates as an upgrade - I would also recommend finding and installing the spin-on oil filter kit...more oil/better cooling/longer oil life/better filtration...no point keeping the Honda or the Toro with that JD! If anyone wants to discuss this line of mowers more - pls comment and we can get a discussion going...as JB said - if you find one in good shape for little money - BUY IT...even with the parts from a JD dealer (which mine Crossroads Equipment-has been excellent and fairly priced), you will spend LESS than a new Personal Pace Toro with a chinese clone engine and have a way better mower in EVERY respect (except maybe the mulching finish-I will be exploring mulching blades and may make a video on this once tested) The heft of the OEM blades is incredible - but as JB says they bag THE BEST...I also rear discharge to get better better dispersal than the side chute - BUT do so at your own risk...I have a few TH-cam videos on these mowers and links to others if anyone is interested let me know...Great video as always JB!
Appreciate you sharing all this info Kirk! I wasn’t sure on the exact heights of the mower deck and after looking them up 3.5 inches kept coming up but hey if it goes to four inches even better! 👍 that spin on oil filter is another nice feature if you can find one!
@@GarageGear I think you're right on the 3.5" JB...I will edit my post to reflect
@@kirkthebeerslinger I’ll double check too but pretty sure that’s what I read
@@GarageGear have a great day JB! Sadly, I came up pretty empty-handed on a search for the oil filter adapter also...I was hoping to find out the Kawasaki 180cc adapter would fit on the 150 engine but it doesn't look like it does... frequent (50hr) oil changes should keep these amazing engines running for a long long time (like starting first pull after 20+ years isn't already remarkable!) Cheers my friend!
@@kirkthebeerslinger those oil adapters are getting rarer by the day!have a great day as well my friend!
Morning JB. I’d definitely hang on to that beast! They don’t make them like that anymore. I had the JD silver anniversary edition that I think bought in early 1990’s. It came with a hose that connected to the oil discharge so that it didn’t spill oil on the machine. My Niece has it now and still runs like Deere. What’s up for the weekend? Cheers buddy!
Hey Jay! Awesome that she still has it! They can really run forever! Bike ride today, filming and closing up the pool! How about you?
Morning JB. Running some errands then probably watching the Bills game. Oh, and watering the front lawn. Had it aerated and over seeded last week. Enjoy the rest of the weekend buddy! GO BILLS!
@@jaybooth4815 very cool my friend! Have a good week! 👍👍
Hi JB also there is a drain hole on these I forgot to mention that before you just put the hose on the deck run the water and start the mower on its lowest deckheight and it will do the rest to wash out the deck underneath, yes these engines are the best, like I said before this is the last mower you will ever need to buy ever.
Right on my friend! 👍
@@GarageGear exactly, thar mower will out last anything new today, have a great day.
Great deal for $65. Gotta love the Kawasaki engines.
I know right??? They are unbeatable!!!👍
I've always liked spiral shaped decks for vacuuming clippings, there seems to be a trade off on them between suspending the cut clippings for multiple cuts vs vacuum/speed of cut clippings. Your Deere would probably excel at thick or tall grass. I wonder if a dual blade (like Honda uses) could provide the best of both worlds?
The factory blade gets really good vacuum and leaves a superior cut when bagging or if clippings are not too long discharging...I will be trying to find a mulching blade that fits as that is the weakest aspect of cutting - the Super Recycler does this the best in my experience
These mowers are definitely better baggers than mulchers with those decks! I wonder if the new Ballard blades would help the mulching a bit?
That John Deere is in great condition for 20+ years of age. Great review and feedback. Awesome tips on starting it, too. Have an awesome day, JB!
Appreciate the positive feedback salmomlox! Thanks for watching
JB, the FC150V is only 153cc. How does this compare to a 190cc Briggs intek that I have on my JS63? Just bought one of these for $50...it starts, but doesnt stay running. The only thing the owner mentioned was the self propelled is intermittent and not gaining much traction when on any sort of incline. I'm not sure if I fix this up to sell or keep it and sell my JS63
Hey killaman! The 153cc FC is plenty of power and far better built than the briggs. Don’t let the numbers fool you. If you clean the carb she should be good to go! I have a video on that that I filmed a long time ago. I would also check the gears inside the wheels to make sure they are in good shape. That might be where the problem is. Typically those transmissions are bullet proof. 👍
@@GarageGear hey man, thanks for the response! I will check all of that today. I'm hoping it's not the drive belt...that looks to be a pain in the ass to replace
@@killaman7592 no problem. yeah that is one Achilles heel of those mowers.
@@GarageGear JB, I took a look at the mower...the self-propelled was working fine for me. Going up inclines and all. Not sure what the guy was talking about haha
@@killaman7592 sounds like you’re alright then👍
So… are we talking 5.9 or 7.3 diesel bullet proof?
@@HorrorBigGameRR 7.3! However both are great if properly maintained! 👍 thanks for watching
JB you have an old school Toro, old school Deere. Now your next mission should you choose to accept it is find a Snapper. Another old school well built mower. I had one years ago and traded it in . High Vac rear Bagger, big rear wheel rear drive aluminum deck.👍
Hey Tom! I’ll be keeping an eye out for one of these and an old Honda! Thanks for stopping by yesterday! Always good to see ya!
Looking for new mower but something that can easily go down to 3/4 inch or lower. Currently use a reel mower for extra low but this time of year I let it grow a bit taller like to hit it with a good push mower. Models that cut low?
Hey Tim! A lot of newer mowers only go as low as 1 inch. I’ll have to keep an eye out.
@@GarageGear yes that's about what I'm seeing most go down too. Seems that honda is perfect at 3/4 but getting hard to come by now discontinued :(
@@TimShelnut perhaps you can knab a gently used one?
@@GarageGear actually found 14 in stock nearby landscaping supply they are doing the recall fix and will be available next week. I'm getting the HRN216VYA. Really like the handle, ball bearing wheels larger diameter and bigger engine on the HRX yet I don't want the plastic deck.
It’s difficult to get paint to adhere to aluminum . U can use primers after prepping the surfaces to get the paint . I had aluminum horse trailers and utility trailers . They were great towed like they weren’t there . If there as a problem it was the paint chipping or peeling
Thanks for sharing this mark
Hey JB that mower is looking really nice and it works as good as new. That was a great find. Have a bless weekend 👍🙏👍🙏
Crazy good find! I was lucky to knab it! Have a bless weekend as well my friend! 👍👍
Any idea where I can get a grass bag w/ frame for JX 75?
eBay or Amazon should still have them. Here’s a link to the bag only on amazon amzn.to/4bl29P6
@@GarageGear thank you. I also need the frame for the bag. I haven't found one yet.
@@elmermason9685 keep an eye on eBay they pop up. Or even Craigslist
I buy my JX75 for $45 because the previous owner buy a new honda mower. Dont know how work the honda but my $45 JX75 work 100% fine and start at the firs pull. I cut 5 yard every two week with its and its work great
@@flexd1453 they are some great mowers flexd! Thanks for sharing
great video... head some good stuff about the Kawasaki engines.
These are unbeatable!
isn't the exmark metro 26 almost the same mower? @@GarageGear
@@coveyking gonna have to check it out
That's pretty sharp..Can't they make more mowers with aluminum decks. I'll be keeping an eye out for one of them.
Not many out there made of aluminum nowadays! If you see them grab it fast!
I have one with John Deere lawnmowers, but it is a brick and truck and engine but I already know how to fix it. I’m just watching this video for entertainment.
Awesome! They are great mowers!
JB what’s the best residential push mower ever made?
That’s a tough question! That’s gonna be between some Hondas, toro super recyclers and John Deere’s between the ninety’s and early 2000’s! Some say lawn boys were really good but never used them. I was always a big fan of the toro super recycler from the late 90’s.
65 bucks?? Holy grand larceny, Batman...
Right???!!! By the way I think today is Batman day! Funny you said that lol!
Dude just sold one on FB Mp for 35 USD
Hey man great video...quick question...have you ever worked on one that didn't utilize an igniter module for the ignition?? I have one that is missing the igniter but not sure if it was there from factory...
@@danielprocita9547 hey Daniel! The older 14SB 14SE models had igniter modules or spark boxes that were separate from the magneto. The jx75 model had it built in.
Such a great ol mower!
One of a kind! Have an awesome week bud!
This is the old model JX75.
@@lanad.4647 you got it Lana! These old ones ROCK! 👍
Have just started my own run of gardens in scotland, looking at one of these second hand online at a great price, this video has been very helpfull and ill be going for it tomorow now, thanks dude
You got it wild! Thanks for watching! Enjoy the mow!
@@GarageGear it was a jx90 not 75 but still went for it, cuts great
@@WildOnWild Awesome! Sweet mower
I love my JX75. I have noticed an issue - the drive belt keeps falling off the pulley. Any thoughts on (a) why this is happening, and (b) any potential solutions? Thanks!
Hey Matt! I wonder if the belt guide isn’t tight enough on the sides of the transmission. Perhaps press them in a little. That should help keep the belt on better. Thanks for watching
Between 14sb models and jx75 I have 8 of them
Holy cannoli! That’s a lot of Deeres! 👍
How would you compare this to say a modern Honda HRX 217 with GCV 200?
@@guitarplayer5611 the old John Deere’s are definitely better! They were built to last! Their only weak point is their blade brake clutches. Which aren’t impossible to swap out just expensive.
@@GarageGear Thanks Kindly! I see the JX75, JX85, 14JA,JX,JZ. I am a bit confused on the different models of the old John Deeres. I have looked for a reference guide of some sort, but haven’t har any luck. Would you mind sharing which of the older models you feel were best and maybe some differences between them and the years produced for each model. Really appreciate your videos! Excellent content!
@@guitarplayer5611 the 14SE and 14SB modes were around in the 1980’s and 90’s. The JX85 and jx75 were around in the late 90’s and early 2000’s all excellent models to keep an eye out for.
I have a 14se that needs a new throttle housing but mine still works for time being. The blade clutch works only this that I haven't tried is the starter as like you said it starts right up. I love the machine overall.
They are fantastic machines Iowa! Can’t beat em
TY for Sharing
Thanks for watching
Don’t you need a mulching blade in order to mulch your grass? Changing blades would make a world of difference in clippings.
They help but aren’t always necessary. The mulching blade for this model didn’t really mulch all that much better.
Hi JB. What is your opinion of the 33 in Cub/ Dewalt/Craftsman walk behind mower? I have a Timemaster and ready like it but this one looks good without spending a bundle of money on a commercial 36 in walk behind.
Thanks for your opinion!!!
I’m gonna look more into this mower but right off the bat anything craftsman nowadays is usually junk. Worth a look though to learn more about it. Have a good weekend Paul!
What would you consider a "reasonable price" for one of these?
Hey Yankee! Probably $150-$200. If it’s it’s got some newer parts on it perhaps a little more. They’re worth the money and worth far more for the parts! 👍
@@GarageGear Lol I thought so! There's a guy on eBay that's selling 2... at $700 a piece!!!! Talk about shooting for the moon! Thanks for the reply! 😂🤣😅
@@swampyankee72 yeah I think I’ve seen him before lol! Those things better be in mint condition for those price points lol!
@@GarageGear It better be NOS in the box for that price!!!
@@swampyankee72 Right! 👍
Awesome stuff, JB. I fondly remember the days when companies made solid products with user-friendly features for home owners at reasonable prices......
So when is this "blindfolded carb rebuild" vid coming out?? 🤪😛🤣
They made some seriously great mower back in the day! I should do that video! Probably would be hilarious! Carb cleaner everywhere but the carburetor would be clean lol! Great idea bud! Enjoy your weekend!
👍👍
Thanks for watching bud! 👍
I LOVE RUNNING BEHIND MY MOWER...
@@jacobsweeney2330 keeps us in shape!
I have one of these for my lawn service and I love it I stripes better than any of the other push mowers I have used over the years
Thanks for sharing cayden!
Buying me one of these tomorrow on marketplace. It’s a 2003.
Grab it! You won’t be disappointed! 👍👍
Don’t ever sell that mower! I have never figured out why Deere dropped them. The commercial version was right up with Toro commercial. They literally disappeared overnight. Which is what will happen to Honda mowers.
She ain’t going anywhere! 👍👍
Now, that's what I would call a "gardener's special".. So happy you didn't part it out, JB! Happy mowing, my friend 😎👍
Gardeners special! I like that! Definitely a great mower my friend! Have an awesome weekend!
One of the best mowers ever made. I have one but the blade clutch failed and I bought a new Toro from Ace Hardware. I quickly realized it was a piece of crap and paid for the expensive fix to get the JX 75 running again.
@@NathanAnderson-kl2rf hey Nathan these old mowers are worth the money and investment
Dude you might as well just give me that mower since you don't like it at all.... lol - Ok now you got me shopping on FB marketplace for one!
Hey Tery! This one is staying with me! You’ll find one. Keep an eye out and don’t be afraid to drive a little ways to grab one! Worth the drive! 👍 happy hunting!
My 20 year old JX75 is running like new. Yes - it runs like a deer! My JX75 is in very good condition and yours looks nearly brand new.
Awesome Trek! Stay tuned got a new video coming out on this bad boy this weekend.
WOW What an awesome mower. looking for one as we speak just to have LOL
They are awesome mowers Chris! If you find one knab it!
Just got one for Free....v
Clean the carburetor....lubed the cables... works great
That is awesome my friend! Keep it around for a while. Better built than anything today!
Nice machine. I have I couple of the old Deeres. They are heavy duty for sure.
Great machines from the good old days
JB!! I Got An Oil Leak - But First Things First How The Hell Are Ya??
I Hope All Is Well. I got a small issue with the snowchucker and the long/short is - my classy aged neighbors across from my moms house that i take care of as well has each become widows over the past 4 months. Breaks My Heart - But I am going to Keep My Commitment. (1 usually goes to Fla. But she'll be home she is in bad shape the other good but lonely i just visited her and brought dinner for her and my mom and I).
I got an Oil Leak ripping outa possibly a connection line.
I took a video. Hmmm...how would i send you or get ya the video? I can post it on my youtube page for 24hrs or until ya see it and then remove it?
I hope you had a great summer with the Wife and did some cool stuff. I have been in the hospital. S2a ghastric stomach cancer. So, im gunna keep going till i drop.
I wish ya were my neighbors. I hate the ones on my direct sides theyre such ugh....Ones named Karen (no lie).
Thanks JB
~Pete
Hey Pete it’s been a while! Sorry to hear about your neighbors and you battle with stomach cancer! I hope you’re feeling alright at the moment and that any treatments you are undergoing are helpful. You’re in our thoughts and prayers my friend!
Things are going well here. Gearing up for a busy snowblower season! As for your leak you can send me a video via email or Instagram (garagegearjb). My email is in the description. I’ll try to help you out as best I can!
Don’t let that Karen get to you lol!
👍👍
I. Don't know why people care about stripeing.
It's like a suit for your lawn.
It’s all about the look for some people! 👍
So I have a question, I’m looking at a 1996 Jx 75, almost brand new for $950 Is there great parts availability for these, and is it worth this price ? It is the 6 hp Green machine. Thanks
Hey pump! Parts are still available for these! Prices are usually on the higher end for parts. Sometimes you can find a deal on things. $950 seems ok if it has low hours on it considering what new quality gas mower prices go for but I would check under the deck. That will tell you a lot. If it’s worn or the blade brake clutch looks pretty rusty it’s got some time on it. Check those out if you can and let me know. Email me some pics if you can I’d love to see it! 👍
@@GarageGear hey, this guy says he’s had it since new, and it’s never even had gas or oil in it! I asked him if i can see a video of it running, but he’s like.. he don’t want to put oil or gas in, because it wouldn’t be NEW anymore.. sounds like a great buy, my concern is if it never had oil in it, is internal cylinder wall going to have some moisture?? How can i send u pics?
@@ppump24valve53 really? Wow! I wonder about the cylinder too. Might have rust forming on it. Maybe less if it’s been placed at top dead center. Perhaps you could pull the cord to see how free she moves? I would have stored it for 20 plus years with some oil in it. My email is in the video description. Can’t share it here or I’ll get spammed.
Just bought a JX75 for $75 - it looks like it’s hardly been used
Awesome! Great mowers! Great deal you got too!
@@GarageGear update: i bought it in “non running condition” … cleaned the carb and it started in one pull lol
@@Kylecarconnect these engines just want to run lol! Good work!
Jb whare can I get decals for my 1960s ariens snow bower
This is a great question! Have you tried contacting ariens?
@@GarageGear yup
@@nicholascalidonna6187 why did they have to say?
Thay side thay don’t make them any more and I am kind of scrambling to find them because I am restoring the snow blower
@@nicholascalidonna6187 oh ok I suppose you could have someone make them for you with a vinyl sticker making machine.
Bought mine at a estate sale for 60 dollars daughter stated her dad didn't use it much.
What a steal! 👍
Gods mower
Sure is! 👍
I picked up originally 2 john deere
A s82 and a rx75 for free
But the guy gave me 2 extra mowers free which was a je75 and a commercial toro with a kawasaki
Wow what a haul! Got some goodies in there! 👍👍
I heard that parts for the Kawa engine are hard to get (carb kits, gaskets and etc), is that true ?
Hey Mario! Yes and no. Sometimes I see parts available and other times no especially on eBay. They are 20+ years old though so it is getting tougher! Thanks for watching
Hey JB!!!, I’m a Buffalo subscriber. I was wondering what the best snowblower I can get. Preferably a reliable one.
Grab an ariens! You won’t go wrong! Very reliable and handle our snow well! Welcome to the tribe my friend! Go BILLS!!!
@@GarageGear THANK YOU SO MUCH!!!
Just picked one up for free in the trash idk much about repair but i want to learn im currently trying to find a manual to it
@@ernestmcclellanjr9857 awesome Ernest! Might be able to find an owners manual on eBay
@@GarageGear I will look there thank you!
@@ernestmcclellanjr9857 welcome!
I had a customer bring me one of these yesterday (5-7-2024) said it throws the belt off. The only problem I can see. Is they aren't using the grass catcher, causing the grass to build up on top of the transmission and getting between the belt and transmission pulley.
Hey Bert. Are the belt guides wide open? There are some belt guides that may be too loose on each side and can be pressed in just a little bit. Also is the belt too loose?
@@GarageGear
No sir. The belt guides seem to be in good position. I have used the machine myself and there wasn't a problem. The way I understand, it was taken to a John Deere dealer they looked at it and refused to work on it. They did put the belt back on. So if they readjusted the belt guides I don't know. I'm still thinking they were running it without the grass catcher. I'm planning on running it again today with some tall grass to see if it comes off. I know it says do not prop open the chute . However that may be the problem. I will also call the customer to be sure I under what conditions the belt comes off. The husband dropped the mower off and told me what his wife told him. When asked other questions, he didn't know. The mower looks like new a 2002, the belt looks good, when engaged the belt is tight. That's a great engine, you are correct about that. Thank you for your response it is greatly appreciated. I will let you know what I find. Again thanks for your response.
@@bertgrau3934 thanks for sharing this Bert! I would just pinch in those belt guides a tiny bit and see how she does. I can’t imagine any other way that thing is coming off. 👍
@@GarageGear
I wound up replacing the belt, the pulley on the transmission as packed with grass. I cleaned it out. And I used the mower for about an hour no problems. I cleaned it out and it looks good. I did readjust the cable for the transmission. Not sure if that helped or not. My customer will pick it up tomorrow. I will help him if he has any problems. I am impressed I is a good mower. I did sharpen the blade while I had it off. Thanks for your input, it was helpful
@@bertgrau3934 you got it my friend
Good video. I have this mower and it is a tank and starts on the first pull. I have a question though, I am doing the service on it and bought an oil filter but don’t see an oil filter on this one that I have. Do some models not have oil filters? Thanks!
@@greadore some models don’t have them. This video explains it 👉3 SUPER RARE PARTS For John Deere 14SB JX75 Lawn Mowers
th-cam.com/video/zB9NGmDZVgU/w-d-xo.html
@@GarageGear thanks!
Changing to the newest part number drive lever & cable fixes the problem with them breaking. Some of the aftermarket cables are good quality although I did get one that had nuts that were too small.
@@DerekDeines thanks for sharing Derek!
You need to find an old Ariens LM21SW best mower I've used. Right next to my 99 Super recycler.
Those were some great mowers!
I’m eyeing 2 right now but I don’t know if it’s this model but it’s a Deere.
Look for a jx75 or jx85 on the back of the deck! 👍👍
@@GarageGear I literally just got a JS26 today! It rained like hell today so I’ll have to wait to cut tomorrow and I’m excited!
@@Destroyer-Grizzly-BIH awesome let me know how you like it!
@@GarageGear Will do. Speaking of JX75, there’s one for sale for $170.
@@Destroyer-Grizzly-BIH I would give it a look! 👍
Hello from Norway
Looks really similar to my 1980 JD 14SB it runs like a charm and have always done that🤩 only now it needs a new blade clutch
@@robertvanvikskjstad7509 hey Robert! Great that you’ve had it that long and that the clutch lasted that long. Thanks for being a cool fan from far away!
Funny i just bought a commercial snapper hi vac with this motor for 85$ all it needed was a carb clean and now it runs great. It cuts better then my toro recycler too
Awesome Conner thanks for sharing!
@@GarageGear no prob love ur vids
@@conner5611 appreciate you bud!
Kawasaki are awsome . I had a big dog Diablo mower made by hustler that had a big Kawasaki FX engine . Also several Scaggs
Kawasaki makes a great engine! 👍
Hi. Just found your Website. Love the videos. I would like to ask you for a recommendation on a lawn mower. How can I email you?
My email is in the video description.
I have a JS40. Not a commercial mower, but beefier than anything made today. Love my caster wheels on the front.
Those are a nice feature!
Just scored 3 14sb for free! Ordered a pair of a wheels and a spur gear. Will do a deep clean an regular maintenance. Will keep this baby for a back up mower.
@@joemiller2629 awesome Joe! Can’t go wrong with these old gals! 👍
@@GarageGear you know it I need to find a hobby when I find myself watching your videos and Taryl fixes all. 🤣
@@joemiller2629 welcome to your new John Deere hobby
It was the best push mower ever made wish deer would bring it back since Honda is getting rid of there push mower...Deer dose some crazy stuff ..
Wish they would make a comeback as well!
Hello JB. Question, do you know if a grass bag from a 14SB, 14SE will fit a JX75 mower. I found one for sale but I need to know if it will fit. Thanks for your time.
Yep it will fit perfectly!
Thank you JB. I knew I could count on you buddy. Have a great day.
@@elmermason9685 you got it Elmer
Just had a friend give me two je75 mowers. Said they ran when put away a few years ago. Checked oil in the first and put fuel in and it fired right up.
Wow! Awesome! Can’t got wrong there!