thanks, the videos are make for the product page on Amazon, I just move them over to this channel as well. But no change to say, hit the like and subscribe button lol. :-)
I have 2 1/2 circle gray pieces and 1 gold metal piece that looks like the shape of the end of the dead bolt . But you did not show what they were or where they go
I tried installing twice and each time, the “smart” lock after putting in the last battery while holding reset never works. So locking and unlocking via code never worked properly.
I lost my programming manual and cannot find one online. would you be able to post a pic or link to a pdf so others would be able to get it? Teeho does not have it on their site, which I think is poor product support.
Great video! Followed installation instructions along with viewing your video. I have a left hand (interior) install. When I try to unlock the door (or do a reset) the mechanism keeps trying to turn in the wrong direction. How can I get it to turn in the opposite direction?
@@ItstheDaveShow1 Thank you for the tip. I cannot turn the switch to the right lock position. It's a hard stop and won't allow me to. The inner switch works freely and fine when I turn it to the left. I am using the left lock switch position (as I believe it should be). I have removed the inner housing and when I use the keypad, it appears to attempt to switch, moves slightly to the unlock position then stops. It's like something is keeping the motor from turning it all the way. It does this twice. I am starting to think it might be defective.
@@LeeE-fx5if yikes, could be something wrong with it, hard for me to know of course. if you took it apart and tried switching to the other way and it still doesn't work might want to contact the manufacturing for that one. sorry
@@ItstheDaveShow1 I appreciate your assistance:) I contacted Teeho customer support. Did a few simple diagnostics and they are sending me a replacement. I must say that they provided the best tech support and assistance of all the other companies I have dealt with in the past, hands down.
I just received mine today. Upon trying to install my deadbolt latch came completely apart and I don't know how to put it back together. Can you help with that?
oh no sorry to hear this, I am not quite sure what you mean or how that would happen. there should be a way to put it back together. Don't think I could help you much with this one as I am not there to look at it and try. Sorry
not sure really, would depend on how often you use it I suppose. That one lock in on my back door and we just use the manual part on the inside to get in and out. So it would vary. Good to use quality batteries.
there is a reset button on the inside part of the lock where the batteries are, I would contact the manufacture for a copy of the instructions for resetting the numbers again.
Maybe I got a very bad model Mine keeps getting stuck and key doesn't work as locking it pressing number 1 doesn't work doesn't lock, and I programmed our number and it doesn't work gotta now have a professional taking all the locks and refunding it to Amazon
@@ItstheDaveShow1 at least yours work, we fix the problem by taking the batteries off and use the key like the old way lol but it works like a lock now xD
EXCELLENT! No long intro and self-promoting BS! GREAT INFO! TY
thanks, the videos are make for the product page on Amazon, I just move them over to this channel as well. But no change to say, hit the like and subscribe button lol. :-)
@@ItstheDaveShow1 🤦♀️ LOL👍
Thank you! Your video was SO much better than the instructions and made my install super easy!
Thank you so much!! This is my first time putting in a new lock. Your instructions were so easy! I’m pretty proud of myself, lol!
I just received mine today. It looks pretty easy to install. Thank you for the video.
Great video! Very helpful! Made installation super easy. Thanks!
Great video. Replaced in about 15 minutes. Thanks for posting.
Great instructions. Very helpful, thank you.
I really appreciate your help this was so easy to install
Thanks for such an easy explanation!! Great video!
This video was super helpful. Thanks!
I used your tutorial to install the fingerprint lock from the same manufacturer. Thanks for the video, it was a very easy installation 😊
that is great! I am glad I could help you
Thank you for this video! 🙏💕
Thanks u made it quick and simple, they need to hire you.
Great video, very helpful, thank you
Thank you SO MUCH!! I just purchased and NOW I know how to install. I am going to pull up this vid when I install
awesome! thanks for watching, glad it can help. pretty easy to do!
Picked and installed in LESS THAN two hours!! I am going to include your link in my Amazon review!!
@@pward8723 awesome!
Thank you so much 😊
You a real one Dave.
Thanks Dave very helpful for me to put mine on
super helpful!!! thank you!!!
Thanks
Amazing how to video! Thank you for making my honey do list shorter and faster 😂😀
Thank you because I was having such a hard time doing that shit I very much appreciate you showing me how to program it
I’m going to buy one now thanks
that is great, hope you used the link in the description :-)
Bought this on sale, but had to order a replacement because the left/right hand detection didn't work. Waiting for the replacement to come in now.
Thank you for the vid.
Thank you. 👏👍
Great Video but I am stumped on reversing the lock. The door opens from the left side. Any suggestions? Thank you
Excellent
BEST TUTORIAL EVER! 👍👍
Can this keypad be installed
on a door that locks from the
left, not the right? Thanks!!!
thank you! yes it can be installed on a door the other way as well.
@@ItstheDaveShow1
Awesome! Thanks, Dave!
Thank you it was really helpfull befor i screw up😊😂
Does anyone know if this would fit a security metal door?
I have 2 1/2 circle gray pieces and 1 gold metal piece that looks like the shape of the end of the dead bolt . But you did not show what they were or where they go
I believe those are adapters if the hole is too big for it.
How do you remove the frontplate from the deadbolt
I tried installing twice and each time, the “smart” lock after putting in the last battery while holding reset never works. So locking and unlocking via code never worked properly.
I lost my programming manual and cannot find one online. would you be able to post a pic or link to a pdf so others would be able to get it? Teeho does not have it on their site, which I think is poor product support.
Great video! Followed installation instructions along with viewing your video. I have a left hand (interior) install. When I try to unlock the door (or do a reset) the mechanism keeps trying to turn in the wrong direction. How can I get it to turn in the opposite direction?
you might want to flip the switch on the inside to the other way, I have had to do that before as well
@@ItstheDaveShow1 Thank you for the tip. I cannot turn the switch to the right lock position. It's a hard stop and won't allow me to. The inner switch works freely and fine when I turn it to the left. I am using the left lock switch position (as I believe it should be). I have removed the inner housing and when I use the keypad, it appears to attempt to switch, moves slightly to the unlock position then stops. It's like something is keeping the motor from turning it all the way. It does this twice. I am starting to think it might be defective.
@@LeeE-fx5if yikes, could be something wrong with it, hard for me to know of course. if you took it apart and tried switching to the other way and it still doesn't work might want to contact the manufacturing for that one. sorry
@@ItstheDaveShow1 I appreciate your assistance:) I contacted Teeho customer support. Did a few simple diagnostics and they are sending me a replacement. I must say that they provided the best tech support and assistance of all the other companies I have dealt with in the past, hands down.
@@LeeE-fx5if that is great news!
Tutorial on how to remove it?
play the video backwards. real easy to figure out
I just received mine today. Upon trying to install my deadbolt latch came completely apart and I don't know how to put it back together. Can you help with that?
oh no sorry to hear this, I am not quite sure what you mean or how that would happen. there should be a way to put it back together. Don't think I could help you much with this one as I am not there to look at it and try. Sorry
I’ve reset mine multiple times but every time it auto locks it goes through lock and unlock 3 times first. Very frustrating any ideas?
Tried installing the keyless entry. The deadbolt gets stuck while unlocking. Any suggestions
maybe just check the hole it comes out of to be sure it is clear and the hole it goes into, make sure it is lined up and clear
Where can I get the programming manual since si lost it
you should contact the manufacture
Dave, I followed the reset procedures but my lock didn’t activate on its own, and now it just flashes and freaks out. Any ideas??
I am sure about that one sorry
i’m bad at this stuff and you made that so easy, great video
How long does the battery last?
not sure really, would depend on how often you use it I suppose. That one lock in on my back door and we just use the manual part on the inside to get in and out. So it would vary. Good to use quality batteries.
mine unlocks, then locks, then unlocks then locks again... What did I do wrong??
that sounds odd, not sure
Mine does t auto lock do you know why
not sure as I am not there to know, maybe check with the manual to see if you have it set correctly for auto lock.
I lost my instruction paper. How do I know what is the code?
there is a reset button on the inside part of the lock where the batteries are, I would contact the manufacture for a copy of the instructions for resetting the numbers again.
why does mine operate 3 times whe
n locking?
I don't know sorry
Maybe I got a very bad model Mine keeps getting stuck and key doesn't work as locking it pressing number 1 doesn't work doesn't lock, and I programmed our number and it doesn't work gotta now have a professional taking all the locks and refunding it to Amazon
yikes, I have installed a few of this brands locks and all still work ok so far.
@@ItstheDaveShow1 at least yours work, we fix the problem by taking the batteries off and use the key like the old way lol but it works like a lock now xD
My lock wont lock with the code .. Only unlocks ... I have to use auto lock to get it to lock
you just need to hold down that one button to lock it from the keypad, I think it was the # button, I show it in the video.
Any keys locks 🔒
How to code the lock
I go over it at 6:56, but it is easy and says in the manual of course too.
If someone just buys this exact lock from Amazon does that mean there keys will work on mine
the keys would be all different, just like any other lock you would buy.
I don’t have a master code. Ugh
yikes
Written instructions suck...thanks for the visual!
i didnt get a damn book to explain it