Wow, what an amazing 4 shot revolver that shoots semi-reliably and powerfully with a great profile and priming mech... Take notes Quadrant... *T A K E N O T E S*
Oh yes! You should definitively try to make a drop cylinder Hammershot! Not sure if you could make it like an old Schofield revolver, but that would sure be neat!
I was shooting my CycloneShock and had a thought about making mega darts more accurate, adding fins. That would make shooting them from spigots necessary. So if you removed the outer shell from this cylinder or used MTB's then you could have a mini rocket pistol. I don't know if it would be good for anything but it seams like a quick and fun project.
Hmm, slight redesign of the cilinder axis front bit (I don't know what to call it) could make that possible. Make it so it slides out a bit, have the rotation mech detachable in some way and you're done. You would have the same amount of shots per cilinder though, so no swapping a 4 shot mega for a 10 shot boomco cilinder on the fly, but still a sweet idea
This is so cool, just wish there was a shorter version so it could fit better in something like the Sweet Revenge even if I did have to cut down the darts.
In my local wars we use an amount of hits before your out because we are a small group currently. We use mega darts like a higher caliber dealing 2 hits instead of one. Just an idea if you use "hits" for a game in your wars.
I think that a cycloneshock can be one handed if a screw or some other protrusion to catch on a belt or some other piece of clothing. I'm seeing the one hand cycloneshock working like that one hand kronos a couple weeks ago.
A J Rodinsky I realllly want a cycloneschock with a hammer prime. Still trying to figure out a way. The one who builds a kit for that will be crowned new king of nerf
Possible idea? What if you were to extend the front of the blaster using this STL and then make an extended, brassed micro dart cylinder. If you stuffed a sledgefire PT in there do you think it's possible to get >100 fps with a hammershot? My problem with the hammershot has always been the low power and difficulty to really increase fps.
Quindarious Gooch Short darts ram-rodded down a brassed 5-shot cylinder or a 3d printed 8-shot cylinder with a 10 kg spring is really good for power/range. It's something I played around with when I got my 8-shot cylinder in, Worker darts ram-rodded down the bottom of the cylinder work really well and are very accurate.
Quindarious Gooch you could do that with a 5 or 6 bore cylinder, I can't recommend it with the 8 bore cylinder because the walls are really thin because of tight tolerances.
I saw Justin's 5shot version that fires the lightake darts. Think your one works better with original megas. Great vid again. Just saw the new Solo trailer and can't wait to watch it. How about you?? TkEZ»UK.
I uploaded a file on Thingiverse that let's you shoot BOOMco darts out of Nerf mag in a Stryfe. I will be making slight tweeks to it so it can be used in a long shot soon.
General consensus these days is that AR removal is a bad idea unless you are using a long brass barrel or similar. What you need is a more powerful spring.
Make a magnetic drop-Cylinder and then see if you can put together a fully modular one. That way you can rock this, then drop in the classic cylinder, the 8-round one, the 10-round boomco, and then see if, for shits and giggles, you can add a single demolisher rocket attachment.
It would never have enough power for a Demolisher rocket and all the drop cylinders have to have the same number of rounds because the rotation mech does not come out with the cylinder. So the stock cylinder, the 5 round mega cylinder, and if someone made a boomco shotgun cylinder that had 5 sets...that would work!
Captain Xavier alright. Well I might actually have an idea for that.. Maybe we can collaborate sometime. Is it alright I’m a kid though? Well more of a tween.
Captain Xavier well you know you best, on a completely different topic where would be the best place to buy or order brass for barrels and such, I assume you might have had links in older vids but I can't find anything and I don't wanna waste money on something that won't work. Also thank you for bring us the community awesome vids and innovated insanity 😄
Cycloneshocks, while wonderfully powerful and comfortable, cannot be easily used one handed (it can be done but not nearly as smoothly) and will not fit in a standard double AK pouch.
@@CaptainXavier it could be converted from a six shooter to a ten shot shotgun with the change of the nerf wheel like a flip fury but with the ability to shoot both elite darts and mega darts. Also I found out that a hammer shot on the bottom part of the hammer there is a plastic bar slap on a k26 spring and your in busines.
They make 7 and 8 rd cylinders for the Hammershot. I suppose you could make a flipping cylinder system. You got K26 to fit in a Hammershot? I owuld love to see pictures of that!
I think I see the confusion. k26 is the name of a very specific spring. It is called "k26" because those were the last 3 digits of the springs part number from the company that sold it. It does not mean the spring has a strength of 26kg. k26 only comes in one size. Now there are plenty of heavier springs that fit in the Hammershot. But k26 is not one of them.
It's well modular and to be honest kinda stupid to me in reality it would need to be moded Since I only play with my friends in a free for all or assault my brother game style We just say Megas and elites are the same well we don't re spawn or die thing we just well shoot each other
Mega darts break shields in our wars and it works great!
Wow, what an amazing 4 shot revolver that shoots semi-reliably and powerfully with a great profile and priming mech...
Take notes Quadrant...
*T A K E N O T E S*
In games where you have respawns you could make it so that anyone hit with a mega dart has a longer respawn time.
My wrist is mad now for trying to one hand fire a mastodon. Should have learned from my experience from doing the same with a vulcan.
A two point sling might work... lol
Kiffma Mealt Well of course. I just wanted to see if I could do it. I can but not without severe wrist strain.
Quite a bit of potential here. Glad to see others doing it. Kudos to you and MTB for promoting this.
I've always loved the hammershot. This would be awesome to use. Walcom will love this
i believe MTB Justin said that using this mod on the 'Sledgehammer' (hammershot sledgefire plunger tube mod) would be incredible.
Today I went to one of my local Goodwill's and picked up to hammershot and love your videos and one of our sub
I had no idea this was possible! So cool! Thanks for always teaching me something new!
Oh yes! You should definitively try to make a drop cylinder Hammershot! Not sure if you could make it like an old Schofield revolver, but that would sure be neat!
Man I love that tactical jolt
I was shooting my CycloneShock and had a thought about making mega darts more accurate, adding fins. That would make shooting them from spigots necessary. So if you removed the outer shell from this cylinder or used MTB's then you could have a mini rocket pistol. I don't know if it would be good for anything but it seams like a quick and fun project.
same as james hunt. also I think using the mega zombie strike darks would look really good. whether it be color or performance
YES!!! A SINGLE HANDED MEGA BLASTER!! THANK GOD I'VE BEEN WAITING FOR YOUR VIDEO!! THANK YOU CAP :)
Do rival rounds fire from that cilinder? Same diameter as mega darts I think? That would be quite nice
Rival rounds are a bit bigger. It might work. I did not try.
The spigots would completely block the rival rounds from fitting in the barrels. It might work if you shortened the spigots.
Hmm, slight redesign of the cilinder axis front bit (I don't know what to call it) could make that possible. Make it so it slides out a bit, have the rotation mech detachable in some way and you're done. You would have the same amount of shots per cilinder though, so no swapping a 4 shot mega for a 10 shot boomco cilinder on the fly, but still a sweet idea
Well you can do it with the mega big shock so theoretically yes
This is so cool, just wish there was a shorter version so it could fit better in something like the Sweet Revenge even if I did have to cut down the darts.
I love that. Eventually I want to get my hands on one or the 5 shot one
The whistle from the darts should be the naming quality in the gun. The whistler or screeching eagle are possible names
Awesome video Xavier keep up the good work
hay cap i am a long tie sub and watch every single one of you videos. Hope the gods are on your side for the next battle
Hi there brother
In my local wars we use an amount of hits before your out because we are a small group currently. We use mega darts like a higher caliber dealing 2 hits instead of one. Just an idea if you use "hits" for a game in your wars.
I think that a cycloneshock can be one handed if a screw or some other protrusion to catch on a belt or some other piece of clothing. I'm seeing the one hand cycloneshock working like that one hand kronos a couple weeks ago.
A J Rodinsky I realllly want a cycloneschock with a hammer prime. Still trying to figure out a way. The one who builds a kit for that will be crowned new king of nerf
That may well be a completely 3d printed blaster like the caliburn and FDL.
great video as always, keep it up cap
What we really need is a hammer action cycloneshock. A "hammer shock" if you will
I’m new to lipos and how does one properly take care of a lipo ( you should do a Monday mod tips on lipos )
We have shield piercing with the Maryland nerf Herders but our dart bin is mostly purple so there is that.
Awesome Creation!!!!
Would it be possible to make a hammer shot shoot demolisher missles?
Or flag rounds to use like a flaregun?
Awesome mod. Megas are fun. I need cylinders for my marshmallow blaster absolver set up so if that one needs a home let me know!
Possible idea? What if you were to extend the front of the blaster using this STL and then make an extended, brassed micro dart cylinder. If you stuffed a sledgefire PT in there do you think it's possible to get >100 fps with a hammershot? My problem with the hammershot has always been the low power and difficulty to really increase fps.
Quindarious Gooch Short darts ram-rodded down a brassed 5-shot cylinder or a 3d printed 8-shot cylinder with a 10 kg spring is really good for power/range. It's something I played around with when I got my 8-shot cylinder in, Worker darts ram-rodded down the bottom of the cylinder work really well and are very accurate.
Batojiri1 You can also cut a rear loading slot.
Quindarious Gooch you could do that with a 5 or 6 bore cylinder, I can't recommend it with the 8 bore cylinder because the walls are really thin because of tight tolerances.
Hey cap you should make a Stefan shooting jolt and see how it holds up as a secondary
Can we talk about the intro? 10/10
I saw Justin's 5shot version that fires the lightake darts. Think your one works better with original megas. Great vid again. Just saw the new Solo trailer and can't wait to watch it. How about you?? TkEZ»UK.
I wanna get one of these to make Hellboy's Samaritan.
I love the intro!
It would be cool if you made a hammershot break action but it could use different cylinders like rival mega boomco and elite and maby pop rockets
New opening sequence!! Yay!
Where did you find a 5 round design?
...I didn't...that has 4 barrels...
I keep on trying to figure out how to make a strongman have a hammerprime so I can keep the western revolver reload action
Finally I no longer have to try and figure out how to make a cycloneshock shock have a hammer shot prime
There is people doing that they cut off the part and use the stock cylinder cause you don’t need to really to do anything
So iv gotten decent at 3D modeling so what do you think of a rival hammershot cylinder, Would it work with the plunger tube that a hammershot has?
I doubt it. Rival takes more power than Mega so it would be hard to get any useful range.
alright thanks.
But I would LOVE to be proven wrong! :D
Captain Xavier Alright I'll try it and test it, if it works I'll send ya one with whatever spring I end up using.
We need to see how AccuMegas will hit; might be distinctive enough for the rule to work.
Use this alongside the minigun and you're basically the DRG gunner
I uploaded a file on Thingiverse that let's you shoot BOOMco darts out of Nerf mag in a Stryfe. I will be making slight tweeks to it so it can be used in a long shot soon.
Boom tendo give us a video, man!
Would this work with the hammershot cosmetic kits with a little jimmying?
Maybe? If the bore on the kit is big enough.
Now, how can it be made modular?
what about a rival hammershot????
Also, I believe I saw on Frankenzilla's Insta that there is a STL to make the Magnus shoot Elites, but not sure who made it.
I will have to look for that one!
Hey Captain Xavier, Have you done a brushless mod? If not, when will you make one?
No. Someday.
Hey I removed the ar on my Mega Magnus and it seemed to make the blaster worse is there something else I need to do to get it to perform better?
General consensus these days is that AR removal is a bad idea unless you are using a long brass barrel or similar. What you need is a more powerful spring.
Hey, I live in NorCal. I believe that you and Walcom go to events nearby, can I ask if the events are public? If so what group?
PaNNC is the facebook group we post public events on.
ya know now that i think about it, captain Xavier looks like Neil Fallon.
#rivaljolt
Brady Banta Didn't Drac already make one?
If not, I already have...
Tracy/Nicholas Woodstock yeah, the Heracles
Is there a working link to the design?
Yes...in the video description...where else would it be?
@@CaptainXavier The link doesn’t go to an actual design. When I click on it, it says the design doesn’t exist
Then he must have removed it. This is an old video.
Captain Xavier have you ever considered Mega half darts
Yes
What is your opinion on he nerf quadrant? If there's a video where you talk about your opinion please let me know
Well...I have a video where I mod one so....
Make it for high impact rounds, now that'd be a good side arm.
dah hunta Rival _is_ lacking a one hand able pistol (kronos is not ideal for one handing)
Which material did you switch to for the third rotation mech that didnt snap? Thanks.
It was still PLA, just a different brand from a different printer.
oh okay, cheers.
Do you know what happend to walcoms hellsender priminghandel (its my favorite mod)
It broke
Mega shot?
I have been wait for this, could you make revoling shotgun Hammershot or a rival Hammershot plz.
Make a magnetic drop-Cylinder and then see if you can put together a fully modular one. That way you can rock this, then drop in the classic cylinder, the 8-round one, the 10-round boomco, and then see if, for shits and giggles, you can add a single demolisher rocket attachment.
It would never have enough power for a Demolisher rocket and all the drop cylinders have to have the same number of rounds because the rotation mech does not come out with the cylinder. So the stock cylinder, the 5 round mega cylinder, and if someone made a boomco shotgun cylinder that had 5 sets...that would work!
Captain Xavier damn. Oh well, it was a thought.
If the spigots are cut down a little it could probably fire rival hirs
Nope. It does not really have barrels. Just a decorative shroud really.
You should make a musket jot since you like kings and castles muskets were first used in the 1400's (i think)
Captain exavier took my idea I wanted to do a drop cylinder
Hey Chaylo, what filament are you using? Hatchbox orange looks dirty next to nerf orange.
No idea, it came with the printer.
I kinda really need this
No dislikes? AMAZING! Love ur vids cap
Would letting Mega darts kill shields not make rockets useless?
No. Mega darts count as a tag but the person respawns with their shield. Rockets destroy the shield entirely for the rest of that round.
Can it take k26 mega centerion
Already did it.
That’s pretty cool
i ran out of pins can i borrow yours???
You should paint the orange red for mega colors
I actually replaced it with a Red one for that very reason. :)
Could you make it take a Stock and a mag?
Stock yes. I have already done that. Mag? No.
Captain Xavier alright. Well I might actually have an idea for that.. Maybe we can collaborate sometime. Is it alright I’m a kid though? Well more of a tween.
what is the most satisfying moment or achievement have you ever experience, besides I.R.E
Hail the stampede!
I made a girl smile once...that was pretty cool...
Captain Xavier well with your charisma I didn't think it would have been that hard to do😊
You would be surprised...
Captain Xavier well you know you best, on a completely different topic where would be the best place to buy or order brass for barrels and such, I assume you might have had links in older vids but I can't find anything and I don't wanna waste money on something that won't work. Also thank you for bring us the community awesome vids and innovated insanity 😄
I buy it at the hardware store.
Why hasn't Nerf done this?!
Idea! Just countersink a screw on the top so it sits flush with the shell
That would be better.
If you do end up putting metal internals into it point it out so I know my idea has not been futile :D
Dude we live in the same state
Someone needs to make a mega lawbringer cylinder
ooh hot dang that sounds nice
Make a vortex hammershot
I figured out a way to one hand a cycloneshock
Oh? Using the hook method or the lanyard method? Or something else?
Heyy early as crap! Nice video as always.
Are you going? Or not
Going to what?
To the Renaissance fair in dillon montana
Just use a cyclone shock
Btw great video
Cycloneshocks, while wonderfully powerful and comfortable, cannot be easily used one handed (it can be done but not nearly as smoothly) and will not fit in a standard double AK pouch.
Captain Xavier love the way modularity works
SPIGOTS YEY!
ED-SKaR Hey it’s that guy from Beret’s live stream who’s name kept glowing wassup man
Yo, sup dood!
What a about a 6 shot or a ten shot hammer shot
What about them?
@@CaptainXavier it could be converted from a six shooter to a ten shot shotgun with the change of the nerf wheel like a flip fury but with the ability to shoot both elite darts and mega darts. Also I found out that a hammer shot on the bottom part of the hammer there is a plastic bar slap on a k26 spring and your in busines.
They make 7 and 8 rd cylinders for the Hammershot. I suppose you could make a flipping cylinder system.
You got K26 to fit in a Hammershot? I owuld love to see pictures of that!
@@CaptainXavier if its a small k26 spring you could idea for a new video I suppose
I think I see the confusion. k26 is the name of a very specific spring. It is called "k26" because those were the last 3 digits of the springs part number from the company that sold it. It does not mean the spring has a strength of 26kg. k26 only comes in one size. Now there are plenty of heavier springs that fit in the Hammershot. But k26 is not one of them.
FOUR!!!!
Can you put this mod in a nerf Fortnite hammer shot
I have a idea for you, a mega mini gun. Use that idea if you want, might be a neat addition to partner with your rival mini gun
do you know how ridiculously difficult that would be?
Well they kinda already created that with the mastodon you just need to increase the capacity
Taksanuba 1990 I actually completely forgot the mastadon existed
there was a pretty neat idea to make the mastodon take custom mega belts. nobody did it tho
Its a megashot
HOLA
It's well modular and to be honest kinda stupid to me in reality it would need to be moded Since I only play with my friends in a free for all or assault my brother game style We just say Megas and elites are the same well we don't re spawn or die thing we just well shoot each other
LOLOLOLOLOLOLOLOLOLOL
2
Muahahah
30th
Comment 100!
69th