Great video!! Can you upload a video explaining how to add a housing around the PCM and around the cell as well? why didn't you make it a heat flux instead of constant wall tempreture. Thanks
@@FrontiersInCFD Take 3 pcm packed circularly from cell That 3 pcm should be different in melting point where the pcm which packed after cell is pcm1 and next pcm packed circularly with pcm is pcm2 and next packed circularly around pcm2 is pcm3. Pcm1 has low melting point then others, pcm2 should have low melting point then pcm3 and pcm should have high melting point
Following is one of example. You can take one gravity value only. Title : Numerical study and optimization of battery thermal management systems (BTMS) Based on Fin-Phase change material (PCM) in variable gravity environments
This was done for thermal analysis only. How heat will be carried away by working fluid/pcm These model you specified involves chemistry of battery also..
Valuable Content 🤝
Thanks
In the named selection method in meshing, when you gave then name PCM by selecting all, was it the whole body or all surfaces only that you selected?
Whole surfaces
for battery why you did not consider anode and cathode? and also why you did not use any battery models?
this is thermal analysis only not related to chemistry of battery so no msmd model considered
Thank you for the informative video. Can you do a video for pcm based for multiple battery group?
Yes, soon
thanks I m lookin forward @@FrontiersInCFD
Uploaded video with 8 cell arrangement
Great video!!
Can you upload a video explaining how to add a housing around the PCM and around the cell as well? why didn't you make it a heat flux instead of constant wall tempreture.
Thanks
Heat flux can also be applied, this is done as per the requirement received
can u do it for 3pcm circularly placed one around another from cell where pcm should be lower to higher or higher to lower melting temperature
Share details
@@FrontiersInCFD
Take 3 pcm packed circularly from cell
That 3 pcm should be different in melting point where the pcm which packed after cell is pcm1 and next pcm packed circularly with pcm is pcm2 and next packed circularly around pcm2 is pcm3. Pcm1 has low melting point then others, pcm2 should have low melting point then pcm3 and pcm should have high melting point
Great video
Pcm width for pcm1 is 1.5*cell size
Pcm2 is 2*cell size
Pcm3 is 2.5*cell size
Which is packed circularly continuous around one another
Can you please explain how to plot graph in between time steps and liquid fraction
Ok will do
Can you make a video on how to plot graph in between liquid fraction on y axis and time steps on x axis
Ok will do
Thank you so much 😊🌹🙏🏻🙏🏻🙏🏻
Welcome!
what should be the boundary conditions if air has to pass over the battery pack (IP67 Battery pack)? Anybody please
select air as working fluid during material selection define the fluid zone for air
You videos provide good information. can you make video for Battery with PCM and Fins by using boussinesq model for PCM
Following is one of example. You can take one gravity value only.
Title : Numerical study and optimization of battery thermal management systems (BTMS) Based on Fin-Phase change material (PCM) in variable
gravity environments
Will do
@@FrontiersInCFD sir
HAve you considered this?
I have a doubt why dont you use battery models like ntgk ecm etc
This was done for thermal analysis only. How heat will be carried away by working fluid/pcm
These model you specified involves chemistry of battery also..
Ohh okay so could there be any way to observe the electro-thermal effect of the battery on pcm?
have to use battery models
can you specify the research paper reference ??
Will update
can i get the saved file of this experiment
Sure connect with us on whats app