Gold Recovery from 1kg DDR Rams .How much Gold in Rams ?
ฝัง
- เผยแพร่เมื่อ 28 ก.ย. 2022
- Hi Guys.
in this video show to you :
Gold Recovery from 1 kg DDR Rams
How much Gold in DDR Rams ?
Don't forget to subscribe to my channel for FREE!
➤ / @imangoldrecovery
100 lap top gold recovery part 1
• Scraping 100 pcs LapTo...
100 lap top gold recovery part 2
• Green fiber Pin Cpu Pr...
100 lap top gold recovery part 3
• Gold Recovery from BGA...
100 lap top gold recovery part 4
• Gold Recovery from scr...
Thanks For Subscribe! 🙏
❱ instagram: / imangoldrecovery
❱❱ Contact us for copyright, sponsorship, and job offers.
❱❱❱ imangoldrecovery@gmail.com
#goldrecovery #goldrefining #imangoldrecovery #goldextracting - วิทยาศาสตร์และเทคโนโลยี
8:15 Neighbors from the top floor probably sometimes think, what the hell is going on in our city, it’s impossible to be on the balcony without a gas mask! 😃😂
Normal day in Mumbai. Or
It's awesome that someone did this whole process and recorded it for the world. Even if it's a crazy amount of work and not worth it, it's cool that people can know that now! +1
thanks for watchng and your 17 mins bro 🌹🌹🌹
If he scraps more kg then he can profit more. Right now 1 gram of gold is about $65 USD. Do you know how much the liquids costr and how many kg it will cover? How much is the equipment? And how much time for each recovery batch?
@@ImanGoldRecovery Do you know how much the liquids cost and how many kg it will cover? How much is the equipment? And how much time for each recovery batch?
@@VenturaIT you can get all that stuff pretty inexpensive at a hardware store, but if you only process 1kg at a time, you'll be spending more than you're making... I think the general idea here is to just show how the process is done, rather than how much you can potentially make processing at least 10kg or more... I let my pile build up a bit before processing...
@@Road_RashSeems like you have to have a large amount and significant amounts of toxic fumes and chemicals.
I had always thought only the gold fingers contain gold, good to know RAM chips also have it. Out of the 0.84 g gold you got, any idea of how much is from gold fingers and IC chips respectively?
Cut the fingers off the ram and use HCl (copper 2 chloride) to remove gold foils. That gold will be almost 24k. Adding the sticks with lead, tin, copper, etc into aqua regia is not only a waste of acid, but makes the recovery less pure and increases waste solution. After recovering the foils from copper 2 chloride, THEN refine in aqua regia or bleach/hcl
thanks for watching and thanks for information sir 🌹🌹🌹🌹👍
Hiii.... can anyone identify this stone pls... th-cam.com/users/shortsq3qKVMvu3xc?feature=share
Youkan do dut
@@syedtanveer8501 🌹🌹🌹👍
Quite straight forward. Less than 1 g per Kg is a typical yield from what I have observed. Many claim much more (up to 3g) but that seems to be the exception.0.8g is realistic, but there may have been quite some Pd as well which you lost in that procedure. That is why I would recover Ag and Pd first using HNO3 and then proceed to AR and dissolve the gold. I love that blender machine!
thanks for watching my video brooo 👍👍👍👍🌹🌹🌹
3g would be if you had a kilo of the chips themselves, most of the weight of ram cards is attributed to the boards.
@@odinvalkyrus I agree. He should have weighed just the ram chips and then the TRIMMED fingers to get a more accurate starting weights. The 0.8 gm of gold would be consistent with 800 gms of starting material.
@@odinvalkyrus You do understand that 1kg of rams has about 50gr of chips max, to get 1kg of chips you need 20kg ram sticks.
@@MrSookonn I have 1kg of ram IC chips that I need to process, once the weather isn't freezing where I am. So indeed I do understand. Not everyone who comments on these type of videos is uneducated. I have been processing various materials for 3 years now.
Was anyone else expecting one of them huge gold bars at the end you see in the movies 🤣 That seemed like a huge process for a tiny speck of gold 😒 Thanks for the upload though, interesting
this is ddr ram broo 😂😂😂😂👍🌹🌹🌹🌹🌹
yo, jajaja
@@falomore 👍🌹🌹🌹🌹
IDK - but was interesting seeing the waste being tossed down the clean water drain.If he's doing this in the US (per the channel ABOUT section) he violated a bunch of federal laws in this video. But good luck and more power to him.
@@uberfu thanks for watching and info bro
People, chemists do recommend using protective gear for a reason, the fumes and the liquids involved in processes like this are not safe to play around in your usual kitchen and bathroom.
Also use a calculator, butane torches, special glass containers and chemicals are much more expensive than what you'll obtain by selling the final extraction.
thanks for watching and information sir 👍👍👍👍🌹
i wouldn't place the flasks and buckets with acids on the floor while walking around it.
How did you convince that SMB to drop just the gold selectively without the silver copper tin lead and other various assorted base metals presents in that solution? I'm asking because that's a very neat trick I wish I knew how to do but I've never come close to doing it myself and I'm wondering if there's something I'm doing wrong or if you just so damn good at it everything behaves better for you
thanks for watching .you can use H2SO4
everything on this channel is 100% BS, i'm surprised he's not dead !
Im just starting my journey on Gold Recovery, and I 100% agree with your thoughts, I've been reading alot of beginner refinet and Tin and Lead are so notorious on messing up your chemicals, so yes the comment above me seems sensible telling this channel as B.S, what Im doing now is trying to avoid scrapping the gold plateds with solder, if I cant, they go to a separate bucket.
Looks like he used sulfuric acid to precipitate lead and silver chloride would be formed with non distilled water and aqua regia yeah? so definitely not sreetips refining but still the same chemistry.
Yah, that was my question.
I keep watching these. I have lots of computer parts, just saving for now till gold prices climb. Think I'll leave the melting to people smarter than me and just sell the parts someday. Fun to watch though, thanks.
thanks for watching my videooo sir👍👍👍🌹🌹🌹🌹🌹🌹
Bakır olmasın
Noooo less than one gram with all that material and hours of work? Totally insane, man...it absolutely doesn't make any sense: rummage through the waste like a beggar to collect a lot of heavy and bulky PCs, transport them, dismantle them, buy all that chemical rubbish and various equipment, breathe poisons for hours with the anxiety of doing something wrong, clean everything up and dispose of the waste. And all this mess and jumbles just for a paltry microscopic 0.85 of pure gold? If you find an honest gold buyer, they will pay you roughly close to $20. It's just not worth it!
❤❤
are you talking about the economy of the us,20 there is nothing, here the gold is more expensive and 50 usd per gram is a lot , the day of work there is about $5 dollars a day with luck
Hello, there are electronic components chip of all goods, there are recycling, recycling throughout the country
@@user-tr2oj5eh8l chips are too light. too much work for too little money.
I literally thought the exact same thing.
Crazy how some counties allow you to wash toxic waste down the sink...at least you made 40 bucks out of it.....
thanks for watching and comment sir
I am just starting out on a project. I do not use heat to remove chips from ram sticks or any boards. Waste of energy. In many cases if one just bend the boards and with a Stanley knife at one corner the chips will literally fall off.
thanks for watching my chanell and good information 👍👍👍👍🌹🌹🌹🌹🌹🌹
It looks as like you're making crepes on that griddle😂
How many ram cards are there, like 100 cards? Wouldn't you make a lot more money if you sold all those whole rams?
this are scrap rams bro and thanks for watching
Hello Iman.
Great clip. Thank you 🌹
Arne 🇳🇴
thanks foe watching my videoo
Nice work brother! thanks for sharing.👍😊
thanks for watching bro🌹🌹🌹👍
Hello; I would like to ask you how to melt the valuable metal on the motor plate and what items to use! Thank you
This video seems to have been made by someone who doesn't want every person to extract gold from electrical components. He made it so complicated and invested in unnecessary substances and actions, when in fact it could be much simpler
thanks for watching an info sir 🌹🌹🌹👍
enlighten us, brother!
❤❤❤❤❤❤
@@rollozucco209
READ !
I’m pretty sure you used 2-4x more cost in the chemicals than you got back in gold.
If you trim the gold fingers, you could use 1/10th of the chemicals. And I’d separate the gold foils first by sitting them in sulfuric acid first, then you’d only need a few drops of nitric to dissolve that.
Never premeasure Aqua Regia. Cover in HCL then add a few ml of Nitric at a time until gold is dissolved, then you don’t even need urea since you only used enough nitric to do the job. Nitric is expensive, lowering the amount of that you use is the only way to maximize your cost of recovery.
thanks for watchin and thanks for information broo 🌹🌹🌹🌹🌹👍👍👍
This is only worthwhile on a large industrial scale.
And then you should also recover the other important material contained in circuit boards and electronic chips.
yes sir its true and thanks for information 🌹🌹🌹
납 (PB)찌꺼기가 하수도로 들어가도 괞찬나요??
It's impossible to tell because it's fast-forwarded which we appreciate but out of curiosity about how long did it take you to depopulate all these RAM sticks of their chips with the hot plate?
20 min for 1 kg ram bro
RAM lerin sadece IC Chip'lerinden mi 0,83 Gram elde ettiniz?Yoksa Altın kaplama Pin'leri de ilave ettiniz Yongalarıda dahilmi?
Teşekkür ederim. Güzel video
rica ederim efendi hepsinden genelde ramlardan modele gore yile gore 0.5 1.2 arası altin eldebilirsiniz .tabiki şartlar farklı ve modele gore ve yapım yiline gore her şey değişebilir efendi
Selam. Chips neden ayirmak gerekiyor? Hepsini birden blander dan gecirsek ve sonra kimyasal tepkimeye soksak olmuyor mu? Altin sadece chip lerde mi kullaniliyor?
altin sadece ciplerde ve kaplanmis yerlede efendi yani yesil kisminde degerli mettal yok
I think you'll expent more money in chemicals than the amount of money you'll get for the gold recovery, plus you'll get the FBI on your back when you buy the chemicals wondering what you need that for lol
thanks for information sir
This seems like a lot to do about nothing. The chemicals probably cost as much as the finished product 😔
Before adding the water, nitric acid and hydrochloric acid you did get rid of the left over solder and tin of there was right?
You can add sulfuric acid to it after filtering aqua regia
and filter again after an hour and get rid of solder and nickel, my friend.
@@ImanGoldRecovery jazaakumullahu khairan
@@hussenhanif5225 👍👍👍🌹
What was the % of gold in ram pins and chips compared?
Yeah. How smart or safe was that, when you rinse that black powder down the drain? Who knows what toxic stuff was still there ..
thanks for watching 🌹🌹
Is it your sink 😂
@@StarTus111 thanks for watching
Bruh
@@26715 thanks for watching
в конце ролика надо открыв окованный сундук доверху наполненный слитками небрежно кинуть в него новый слиток, давай показывай заначку)
hahahhah thanks for watching my videos
Hey I have one question. Where do you get your supply of quality rams and cpu's could you please tell me.
im mobile and computer repair man broooo 👍👍👍🌹
For maximum yield, you have to first strip off the layer that is covering most of the gold with caustic soda before processing the boards...then you'll get all of it...
thanks for watching and good information broo 🌹🌹🌹🌹🌹🔥👍
Must be a rental house. Washin that stuff down the sink
this is my hous bro no problem 👍👍👍👍👍
Наглядный пример как делать не надо
yes brooo this model has very little gold
Полностью согласен.
What about the gold inside of the chips? They’re made of pure gold circuitry. The older ones had almost an ounce of gold in them and that’s why they were so expensive. They figured out how to make them smaller yet they still are made with silica and gold,just less. Wouldn’t it make sense to pulverize them and extract the gold chemically?
yes it is bro
@@ImanGoldRecoverykako skinuti pozlatu najlakkse sumpornom kiselinom i sta jos treba
بسیار مفید و کاربردی ، مرسی استاد ❤
mamanooon az shoma doste aziiiz
Good technique and good use of acids, I really like your blender too! 👍🏼
thanks for watching sir
Are you wearing PPE equipment? It's a health hazard. How and where do you have the chemicals reclaimed? I worked in building those things and you can't dump it down the drain! The EPA will come after you if you aren't disposing the chemicals properly.
@@thomasdomanico1502 thanks for watching and thanks for help sir
Parabéns pelo lindíssimo trabalho 👏👏
thanks 👍👍🌹
Great work Iman nice yield , but looks like your hotplate and around it needs a serious cleaning bro .
yes broooo hahahahah 👍😂😂😂😂😂😂😂👍👍👍
My, my. Three thousand years ago the Argonauts used the Golden Fleece of a ram. Now we are getting gold from RAM.
thanks for watching and commment
Lots of people collect computer scrap but it's nice to see gold being recovered. I always assumed it was a very small amount.
thanks for my videoo sir
A large amount of pollution, also.
@@notozknows everything causes pollution lol
@@JCortez98 Wind, water and solar doesn't. You laughed about pollution, you must be dying and don't care. RIP.
@@notozknows I’m not bothered at all. Might as well talk to a wall.
ddr1 모델이 금함유량이 좀 적은걸로 알고있는데..sop타입ic보다 ddr2 bga타입ic에 금이 많은걸로 알고있습니다.
추출하는영상은 처음보네요 잘봤습니다!👍
thanks for watching my friend
Thank you for your nice video extracting gold metal. I just wanted to know also the weight of square tips and epoxy base board each.
120 gr of gold finger in the 1 kg ram
감사합니다 ~~좋은영상잘보았습니다 ...........❤
Мне кажется он потратил больше,чем получил
thanks for watching 👍🌹🌹🌹🌹
здаётся выход должен быть получше.
Безумие! Реактивы, для добычи этого кусочка золота стоят больше самого золота! Где рентабельность?
thanks for watching .in ddr2 and dd3 rams sir
thanks for watching sit this is a hobby bro
Реактивы приходят и уходят, а золото вечно )
@@homolupus6724 🌹🌹
내일은 DDR램 500g 따라 해볼께요
영상 감사합니다 ㅎㅎ
thanks for watching broooo
There was so much going on I totally forgot what I was even watching , and then all that for a spec of dust 😂.
thank for watching my videooo sirr
Здравствуйте
Какая мощность гриндера?
Пробовали молоть без обжарки?
Заранее пасибо за ответ.
Holy shit, where do you even get ram that old, in that quantity, in 2022?
thanks for watching and comment sir
Hope you got a mask on to protect your lungs. All the gold in the world isn't worth your life. ❤️
thanks for watching my videooo🌹🌹🌹❤
@@ImanGoldRecovery what about all the chemicals being burnt and going in the air?
@@ImanGoldRecovery spouse unlocked 😂
@@leroyspankens9618 los tura por el desagüe caño y ya se los destapa.
@@leroyspankens9618 He closes his balcony door and lets his neighbors lungs filter the fumes
Looks like you left some gold in solution. Hopefully you tested with some stannous chloride. Or maybe the yellow color was from your FeSO4. Thinking maybe more urea to denox completely...
feso4 color is yellow broo
thanks for watching my video bro
Very interesting video! I'm interested in the grinder you're using, can you share the make and model?
th-cam.com/users/redirect?event=video_description&redir_token=QUFFLUhqazRoeUZERkpLVlBWWTh3SXk4V0lYQjhHUENod3xBQ3Jtc0tsRXdNT3RBM3dKOHVqem1kelBMNmQyU0Jua3JQeENoa3NaVkZmM201czhzOXVrX2VYTmVoQlBVY1J6c3c0clB2NVlBVmxXeXBDcEZyWnlVT0l1V2lwd2xJUEl4NGN6VW4ycXM2LXNsQjJUOUtBc3pnTQ&q=https%3A%2F%2Fwww.emirmakine.com%2F&v=ab8HvKybjPs
there is a crazy amount of safety concerns and lack of care for the environment rinsing stuff in the sink, burning stuff without a vent and filters for the smoke
thanks for watching my video broo🌹🌹🌹
But the views thi
Don’t you have a tree to hug some where, hippie?
@@rangerjones5531 😂😂😂😂👍
Man popping up like health and safety 🤦🏻♂️. Bro kick back n watch the video 🙈
Did you immediately do the Goldfinger Aqua Directing Method? Is that possible? Don't you have to detach the gold from your finger first??
not problem bro 👍👍👍👍
@@ImanGoldRecovery thanks broo🫶
Are any of these chemical mixtures flammable???
no bro .has very dangerous toxic
Parabéns pelo vídeo. Aqui no Brasil, acho que não da para fazer esse processo, porque só o valor que vão pedir em 1kg de memoria + todos esses produtos, fica mais barato ir no ourives e comprar 1 grama de ouro pronto. Aqui o grama está R$ 489,00, isso do 24k, esse valor convertido em dólar dá aproximadamente U$ 94,95.
thanks for info sir
selamun aleyküm kardeş.videoların çok eğitici teşekkür ederim.yalnız ürünlerin kalayını temizlemeden işlem yapıyorsunn.biz kalay yüzünden kral suyundan çöktürme yapamıyoruz.seninkiler çöküyor.bir sırrı varmı acaba.senin yaptığın gibi deniyeceğim.bakalım sonuca ulaşabilecekmiyim.hurda bulmakta zorlanıyormusun.antalya biraz sıkıntılı bu konuda.şimdiden teşekkür ederim.iyi çalışmalar.
hayir kardeş bir sir yok.malinize kral suyu vurun reaksiyon bittiktan sonra iyice suzun .sonra 100 ml sulfurik asit ilave edin .bi saat bekletin .bi daha filter keğat yadimiyle bi da ha suzun .kalay nikel lehim ne varsa filtreda kalir kardeşim .sulfurik asit kalay nickel lehim için çokertici sayilir .siri bu 😂😂😂😂😂
@@ImanGoldRecovery teşekkür ederim kardeşim.size iyi çalışmalar.allaha emanet olun.
Assalamualaikum brother can gold particle dissolved in (HCl+bleach) according to Trinity gold refining
Do it the proved and trusted way.
That way when something goes wrong, you'll easily find a solution to stop it from occurring in the future.
usta sizin yeriniz nerede, sadece altın geri dönüşümü mü yoksa paladyum platin gibi geri dönüşümler de yapıyor musunuz?
altin gümüş palladiyum da yapariz kardeş
@@ImanGoldRecovery merakla bekliyorum usta, eğer istanbuldaysanız sizinle yüz yüze tanışmak isterim, ben and. yakası maltepedeyim
22k isnt pure and if you did your aqua regia step correctly which it looked like you did your purity should be 99.99 at least which is 24k
thanks for watching and comment sir
I'm so happy I made productive decisions about my finances that changed my life forever,hoping to retire next year... Investment should always be on any creative man's heart for success in life.
I agree with you and believe that the secret to financial stability is having the right investment ideas to enable you earn more money, I don't know who agrees with me but either way I recommend real estate or crypto and stocks.
I am interested to know more and invest in Crypto please
trading is easier with proper guidance, especially from a professional, Newbies who are not aware of how crypto truly works and wish to make profits from it, I would advise to invest with a professional like Fergus waylen, It helps secure and minimize the possibilities of losses.
I'm honestly surprised that this name is being mentioned here, I stumbled upon one of his clients testimony last week in CNBC world news
Well, you are saying the fact. I invested $4,000 with fergus Waylen. and earned $12,000 in 7 working days.
Once i get arounf 10 pounds of gold fingers im gonna try to sell them. Do you buy from viewers or would you know where they can be sold
thanks
If i mix SMB powder with normal water not Hot water, is any problem?
you need mix it with hot water
Imani kuvvetli abim 0.84g senin harcadigin malzemeyi cikartmaz ki :/
thanks for watching and comment sir
Cool demonstration 👍.
$40.9 USD of gold that needs further refinement.
Far far exceeds the price of anything used except maybe the tweezers? 😂
Personally, I'd test them and resell what can be.
I imagine though, if you work around or have access to RAM and other parts it's probably worth it in the lonnnnnnng run.
its not that hard to get your hands on old ram sticks
@@thewolfgaming4874 please tell me where I can get over a lb let alone a kg for less than the profit.
You'll maybe able to do it once but guaranteed without being in his position "working on computers" you won't.
Just being realistic!
And their not sticks, their card's.
And totally eco-friendly, the process.
@@Joe-Mu nothing eco friendly about the refinement of metal's.
do you realize that its not only ram sticks that contain gold?
이런방법도 있다는게 흥미롭네요, 애써주심에 감사합니다. 전기분해 방법도, 또 다른 방법도 있을것 같은데~
thanks for wawtching and comment sir
WOW, i'm amazed by this whole extraction process. I only have one question.
How many DDR RAM did you need for It be 1 Kg? 🤔
30 _45
What is the profit margin brother?
-100 :))
You know this video would have been more interesting if you hadn’t shown removing every chip. I know you fast forwarded it but that didn’t help my headache any. lmao 🤣. 🐎🌻✌️
thanks for watching my video brooo 🌹🌹🌹👍
What is average gold from 1kg ddr2/ddr3 per kg
0.5_0.8 bro 👍👍👍🌹
Hi~thanks for clip.
would you let me the grinder brand and modek no.?
thanks for watching my video bro .emir Grinder machine .made in turkiye
A lot of work for $60. And I'm sure the neighbors are just thrilled by the smell and exposure to toxic materials. Also, gotta love the safety shoes....
thanks for watching and comment sir
Явно много потерь при таком методе.
thanks for watching
For 46€ gold you spend over 100€ in acid products. Nice job
thanks sir this is a hobby not job
Evde ekmek yapımı, şarap yapımı, viski yapımı, mazot yapımı derken altın yapımına da geçmişiz. Hayırlı olsun.👏
teşekkür ederim efendi 😂😂😂😂👍
Was it worth it that's what I want to know
thanks for watching and comment sir
Nice video, thanks :)
Thank you too!
So spend over $200 in chemicals and supplies and end up with a $53 gold nugget and poisoning your entire apartment complex. Got it. 🤣
thanks for watching sir
Видео о том как делать не надо.
yes brooo thanks for watching my video🌹
100 пудов,травить нужно было без промывки.
Si se puede con mes nos tienpo
👍👍👍 thanks for watchin my chanell sir
I watched 17 minutes and I want my 17 minutes back. Now imagine how the guy in the video must feel
The reaction is inmediatly. All electronics all full of gold
La experiencia tras obtenerlo, tiene que ser muy gratificante pero, no creo que merezca la pena tras los productos utilizados. Aun así, muy interesante!
Dear friend, we are looking for metals that are many times more valuable than gold. We can consider gold as a gift.thanks for watching bro 🌹🌹🌹🌹🌹🌹🌹🌹👍
Honestly you would not recover a half of what you invested in chemicals, not worth it
this is hooby bro .thanks for watchinggg 👍👍👍👍🌹🌹🌹🌹
@@ImanGoldRecovery y con los químicos que hiciste? Los tiraste por el caño?
Do u wear protective masks? High quality 3m expensive gear. Very toxic
You re not wearing proper gloves
@@vincencohan3626 👍👍👍👍👍🌹
Es más el gasto en químicos y procesos que lo que realmente se recupera de oro...impresionante el desperdicio de agua
🌹
Wasser kann man nicht verschwenden, es ist eine unendliche Resource.
😂😂 All that work, energy, those chemical for a 8 points its not worth it man. Its juat too expensive but it was good work and fun loved it man.
thanks for watching and comment sir
that gold is worth 50-60 euro; the work and cost for all ressources and chemicals... ? idk... 300 euro?
What's SMB that he added? What does it stand for?
sodyum metabisulfat bro👍👍👍🌹🌹🌹
When you say neutralized are we talking about a solution with a ph of 7 to precipitate from?
No removed HNO3 FROM AQUA REGİA BRO
Много золота потерял и смыл в канализацию.
Реагентов перевёл больше чем стоит этот кусочек.
its worth it only in very large quantity. 1 kg dram memory sticks only yield 80grams of gold and needs a lot of chemicals and fuel to extract.
yes is true and thanks for watching and comment bro
He spent a ton of expensive chemicals, a lot of time and got a drop of gold.😐
Если бы продал по сто рублей за каждую то получил бы 6000 а так по курсу золото у него вышла 3000 и то не понятно какой пробы а если низкой и то цена будет 1500.
🌹🌹🌹🌹👍🌹👍
That loop... That loop... That loop... That loop... That loop.......
🌹🌹🌹👍
daha yeni izledim helal olsun üstadım ellerine sağlık
teşekur ederim efendi
Very good,wonderful job👍🤝
thanks for watching my video broooo🌹🌹🌹🌹👍
Also, where's the stannous chloride test?!?
Hi everybody, the question that immediately comes to mind when seeing this "separation of the printed circuits" by heating the RAMs is "Is the guy wearing a mask?" because the vapors must not smell like "CoCo Mademoiselle" ... I haven't finished watching the video because in fact it interests me more suddenly.
La question qui me vient tout de suite a l'esprit en voyant cette "séparation des circuits imprimés" par chauffage des RAMs c'est "Est-ce que le type porte un masque ?" car les vapeurs ne doivent pas sentir le "CoCo Mademoiselle" ... Je n'ai pas fini de regarder la vidéo car en fait ça m'interesse plus du coup.
Best Regards,
thanks for wawtching and information sir
If you take a sip from the green liquid, i give you a 100 dollars.🤢
🌹🌹🌹
Aren’t the liquids and stuff about the same price as the 0,84 grams you left with?
so in other words instead of buying the chemicals for 100$ u could buy 50-100 lottery tickets instead lmao