This video worked perfect to fix my issue. Mine would run for a second then immediately die. No previous issues. Followed this video and no more issues. Thank you!!!!
YOU SHOULD ALWAYS TELL the Viewers the Year , Make , Model and Engine size whenever making these Videos , because many of the same model of vehicles have different size Engines . Some of the same model of vehicles come with 4cyl , 6cyl , and 8cyl . engines . Keep helping folks . thanks
That you for your great advise. 2013 Tundra 5.7 started having a hiccup while driving. We followed your advise and cleaned the maf. Thought this fixed it, but it continues along with random stalling while driving. No engine light on. 59,000 easy miles and we are stumped. Thank you.
2008 Tundra 5.7 260,000 miles, same issue with engine momentarily dying and restarting while driving. Had to replace the MAF with new. Cleaning the old one wasn't fixing the issue for me.
do you have any idea what size those two retaining screws are? Both on my Tundra are stripped, and I'll need to replace them as soon as I drill them out to remover them. Good video instruction!
Great video! Any help with a P0101 code on 2016 Tundra? I cleaned the MAF with CRC MAF cleaner and the code comes back. I replaced the MAF with a new one from Toyota today and still get the code.
Thanks for the video, very helpful, I have a question, before I clean the sensor, Do I have to disconnect the negative terminal in the battery? Thanks again and let us know.
Great video as usual. If the check engine lite was on before the cleaning. Will it reset after awhile. I haven't done the cleaning yet. Will also do a throttle body cleaning after watching that video.....thank you
Disconnect the negative terminal on battery after cleaning/replacing and it will reset the codes. If it returns you have another problem or you didnt fix the intial problem
@@robertsimonofsky3959 disconnect both negative and positive battery terminals and then touch them together for several minutes and that'll erase the code. It's best if you touch both together.
Mine it’s a 2012 4x4 and was giving 300 mpg and sometimes was acting like slept transmission Then I replace the maf sensor and worked pretty good and gave me 320 mpg which it’s great to me but now it’s having same problem like before! You think something else it’s wrong with it? Thank you
Marcos González! Eso es cuando iba a 60 mpg talvez más y si le pisaba el gas no respondía si no más bien no tenía fuerza y mas bien cabeciaba! Eso solo cuando quería rebasar! En menos de 45mpg andaba normal! Pero un día decidí revisar la bomba de gas y encontré el problema en los conectores d la bomba como quemados los limpie y los engrase y se acabó el problema! Para eso tuve que bajar el tanque de gas y revisar todos las confecciones de cables a la bomba! Checa la tuya y suerte man
alwaleed alhinai Don't use anything other than MAF sensor cleaner as shown in his video. Other products will leave residue behind that will ruin the sensor. It's not required to clean it, but debris gets stuck to it. Eventually it'll burn out or you'll get a check engine light prompting you to clean or replace it.
@@JohnWaid6Plus What !!!! NEVER disconnect Battery Cable on 1996 ( OBD-2 ) vehicles unless it is Absolutely Necessary....Cleaning the Mass Ảir Flơw Sensors fall into the "Not Necessary Category" 1) Gonna erase all of the Customers Assigned Radio Stations 2) The Customer has a Smog Check Inspection hêre in California the next day @ High Noon..Car will automatically Fail because all of the OnBoard Diagnostic Monitors were previously displaying "Ready" , now they're displaying "Not Ready" If # 1 & # 2 participation is gonna create conflicts, make da_ _ sure you plug a Real Battery Saver into the Cigarểtte Lighter. Autômotive Professional Smog Repair Background : Southern California
Kennneth Ehrlich It's not a filter. It's a sheet of activated charcoal that absorbs gasoline fumes after you turn the engine off. The gasoline vapors would normally escape the intake backwards through the air filter, but that charcoal sheet catches them. Raw gas vapors in the atmosphere create smog.
I just learned that the MAF measures the air flow and sends the result to the ECU which calculate the amount of fuel to deliver.If it is dirty ,wrong info is sent to ECU. So more fuel consumption.
![[LIVE] : ONE ลุมพินี 78 | คู่เอก "ปกรณ์ vs ฟาบิโอ"](http://i.ytimg.com/vi/LSOmgl0Th2c/mqdefault.jpg)
Your productions are a perfect mix of pictures and clear, precise, understandable step-by-step instructions. A sincere than you!
Thank You ... an easy service anyone can do with this instruction. 2017 Tundra 4x4
I was about to take my Tundra to the dealership. I'll save myself a lot of money and do it myself. Thanks!!!
yo you just saved me i no nothing about cars and I watched your video and cleaned my sensor no mechanic no tow truck thank you
you are welcome
This video worked perfect to fix my issue. Mine would run for a second then immediately die. No previous issues. Followed this video and no more issues. Thank you!!!!
My 2007 tundra is doing that. I'm gonna try this now.
YOU SHOULD ALWAYS TELL the Viewers the Year , Make , Model and Engine size whenever making these Videos , because many of the same model of vehicles have different size Engines . Some of the same model of vehicles come with 4cyl , 6cyl , and 8cyl . engines . Keep helping folks . thanks
Thank you. Your video on throttle body cleaning was great. Mine was filthy after 110,000. My truck idle is supper smooth now. Thxs again.
Thank you. I replaced my MAF a couple of years ago. I will try cleaning before replacing again. I didn’t realize it needed to be cleaned.
Beautifully simple and easy --- thank you so much for a great video education!
That you for your great advise. 2013 Tundra 5.7 started having a hiccup while driving. We followed your advise and cleaned the maf. Thought this fixed it, but it continues along with random stalling while driving.
No engine light on.
59,000 easy miles and we are stumped.
Thank you.
2008 Tundra 5.7 260,000 miles, same issue with engine momentarily dying and restarting while driving. Had to replace the MAF with new. Cleaning the old one wasn't fixing the issue for me.
just wanted to say thank you!! Very nice explanation -
Cleaned mine ..they put white paint across the top of those tiny screws...how crazy. put in new screws back in. Thanks
saved me 200 bucks! thx!!!!
Thank you for your video!
I have had good luck with Maf sensor cleaner and compressed air-at least never made anything worse…
do you have any idea what size those two retaining screws are? Both on my Tundra are stripped, and I'll need to replace them as soon as I drill them out to remover them. Good video instruction!
good information mine really needed it.
nice, good job cleaning it
Very helpful! Thanks
Great video! Any help with a P0101 code on 2016 Tundra? I cleaned the MAF with CRC MAF cleaner and the code comes back. I replaced the MAF with a new one from Toyota today and still get the code.
Did you ever figure it out? I've been dealing with it for years.
Is the process the same on any tundra from 2000-2008
Thanks for the video, very helpful, I have a question, before I clean the sensor, Do I have to disconnect the negative terminal in the battery? Thanks again and let us know.
No just disconnect the connection and remove MAF from the housing and spray away. Alway do it disconnected from the housing.
I currently live in Mongolia, where I can not find mass air flow cleaner. I've seen some people say it's ok to use rubbing alcohol. Is that true?
craignmongolia yes it’s true, you can take vodka, or alcohol, result will be the same
Great video as usual. If the check engine lite was on before the cleaning. Will it reset after awhile. I haven't done the cleaning yet. Will also do a throttle body cleaning after watching that video.....thank you
Disconnect the negative terminal on battery after cleaning/replacing and it will reset the codes. If it returns you have another problem or you didnt fix the intial problem
@@tglennhunt thank you for thereply back
@@robertsimonofsky3959 disconnect both negative and positive battery terminals and then touch them together for several minutes and that'll erase the code. It's best if you touch both together.
Do you need to disconnect the battery first?
Thank you!
Do you have to disconnect the battery
Thank you
Is it ok to get the cleaner in the plug part of the harness
Yes but honestly not needed.
Thanks!!!
Mine it’s a 2012 4x4 and was giving 300 mpg and sometimes was acting like slept transmission Then I replace the maf sensor and worked pretty good and gave me 320 mpg which it’s great to me but now it’s having same problem like before! You think something else it’s wrong with it? Thank you
What do you mean slept transmission im having a problem with my truck
Marcos González! Eso es cuando iba a 60 mpg talvez más y si le pisaba el gas no respondía si no más bien no tenía fuerza y mas bien cabeciaba! Eso solo cuando quería rebasar! En menos de 45mpg andaba normal! Pero un día decidí revisar la bomba de gas y encontré el problema en los conectores d la bomba como quemados los limpie y los engrase y se acabó el problema! Para eso tuve que bajar el tanque de gas y revisar todos las confecciones de cables a la bomba! Checa la tuya y suerte man
@@maynorordonez9158 muchas gracias mi troca nomas no reaciona aveces cuando paro en un stop o le vajo de velocidad tarda unos segundos en reacionar
I think I can use contact cleaner.. it's always looks shiny and I don't bother to clean it.. is it compulsory to clean it..
alwaleed alhinai Don't use anything other than MAF sensor cleaner as shown in his video. Other products will leave residue behind that will ruin the sensor.
It's not required to clean it, but debris gets stuck to it. Eventually it'll burn out or you'll get a check engine light prompting you to clean or replace it.
Thank U Sir 🤓😷😎
Do you suggest disconnecting the negative terminal from battery before removing the harness?
no need, just ignition off
I would remove battery terminal before taking it out it’s a really good idea because this can mess your mass flow sensor up
@@JohnWaid6Plus
What !!!!
NEVER disconnect Battery Cable on 1996 ( OBD-2 ) vehicles unless it is Absolutely Necessary....Cleaning the Mass Ảir Flơw Sensors fall into the "Not Necessary Category"
1) Gonna erase all of the Customers Assigned Radio Stations
2) The Customer has a Smog Check Inspection hêre in California the next day @ High Noon..Car will automatically Fail because all of the OnBoard Diagnostic Monitors were previously displaying "Ready" , now they're displaying "Not Ready"
If # 1 & # 2 participation is gonna create conflicts, make da_ _ sure you plug a Real Battery Saver into the Cigarểtte Lighter.
Autômotive Professional Smog Repair Background : Southern California
@@JohnWaid6Plus That is stupid. No it will not.
Hey I heard you have to disconnect the battery anytime you take a harness apart. Did you disconnect the battery?
What is the filter that is in the vover of the air filter box
Kennneth Ehrlich It's not a filter. It's a sheet of activated charcoal that absorbs gasoline fumes after you turn the engine off. The gasoline vapors would normally escape the intake backwards through the air filter, but that charcoal sheet catches them. Raw gas vapors in the atmosphere create smog.
Hey how long should I leave it to dry for?
😍😍😍😍😍
Same for the tacomas?
should be the same
😢
Why you clean that mass sensor
it helps engine to run perfect
I just learned that the MAF measures the air flow and sends the result to the ECU which calculate the amount of fuel to deliver.If it is dirty ,wrong info is sent to ECU. So more fuel consumption.