unable to install or run thuis application this application require your system to be updated to microsoft common language runtime version 4.0.30319.0 sir when i install the this application then this error will be occur plz about somethings
It means it could not detect the opened excel. Is this issue for this specific file or all the time ? Note that it may not detect excel from office 365. Do not select the heading when you select the data. If this do not work for you, save the excel with in *.csv format and adopt Points>Import Points from file and browse the csv file. This should work. In Csv file, do not put heading, just put the data in normal order (Serial number, X, Y, Z, Remark). Do not put any additional columns.
@@rajmohan3134 this issue occure on all files, I tried the CVS method it didnt work as well. Also im using Excel 2016 which might be 360. Do you know any other silution I could try?
@@kazerzozay From my previous experience, it may be due to Excel 360. But the import from CSV is independent of excel version. So your data format may be the problem. So can you share me about first 30 points so that i can check it. Check that 30 points by your self and if it didn't work, share with me in google link (softwelvideos@gmail.com). (Share only if you think it is ok). Alternatively, a newer version is there in Downloads.softwel.com.np . You can use Learner version of SW Road and it has the same SW DTM integrated under Menu>DTM>DTM for Autocad . Hope this will help.
While importing excel from SW_DTM software it gives Error- First select the correct range and then click OK! please help me what is correct range what it says?
You have to convert your data to SW DTM file format. (ie Chainage, Partial Distance, RL and Remark). For Excel sheet to convert to this format from stepping method you can download file from Here: drive.google.com/file/d/1wXkB5dquUyuNfWQzkfEEmownUdFSp7y6/view?usp=sharing
Raj Mohan thank u so soooo much.. even now i dint understand .. i have to copy paste mydata in the format sent by you or what? I have this format: sn chainage L 0 R RL eg 1 0+000 -3 100.00 0 100.15 3 100.05
I want to draw 3 line in profile at a time , one line coming existing level, I need 2 more line : actual level line and required level line. how , I have Data in excel plz help urgent.
You cannot draw 3 lines in same profile using this software. However if you have data in excel you can draw 3 different profile and merge them manually.
I dont have formula. You draw 3 different profile as shown in this video at time 4:45. You see "Read Data from Default file". Change it to "Read Data from excel file". Then you select your data in excel. The format Should be First column "Chainage", Second column "Level" and Third Column "Remark". You can leave remark column blank. But you have to select 3 Columns (without heading). Then other step as shown in the video. After drawing 3 profile, you have to merge them in autocad.
sir this software i have used before time but this time automatically block and close. so sir how to i can get this software.please kindly help me sir.thanks regards buddhi lama,htd.now Qatar
This software is completely free. The developer won't block it. I have never heard or face such blocking problem. Try reinstalling the software from provided website. And please let me know if it solved. Probably we can get solution with discussion.
SW DTM has no built-in option to change text size, however you can change text size within autocad. For this follow this instruction: 1)Select any text you want to change. 2)Right click and click on "Select Similar". This selects all the text of pre-selected text group. 3) Type "PR" then hit Enter in commanline. you will get Property pallete. 4) In property pallete, find "Text Height" in text group and change the value. This will change the height of all selected text. 5)Repeat these steps for other text group as well.
Sorry for the problem. If u couldn't understand the language, just ignore the language and follow the steps. ( Right not I am busy somewhere else. So I cant make new video).
AOA Sir g Sir kindle Lisp Wali Desecription Wali smj nhi ahi wo kaisy krty hi jis k Zareye sy hu. Easily Lisp Commomds Asani sy Downolad kr sakty hi and Sir plz Send mi Mobile no in Used of Whtsap
![[Live สด] การออกรางวัลสลากกินแบ่งรัฐบาล งวดวันที่ 16 กรกฎาคม 2567](http://i.ytimg.com/vi/B8gcGM6I6e4/mqdefault.jpg)
ITS A GREAT TIPS ,THANK YOU MR. RAJ MOHAN..
thanks sir
Thank-you
Job kohi cross section DTM say plot karta hu too who scale mai nahi aata kyo
Thanx alot!
Good job bro
data from auto level doesnot draw crossection in this software or what????
Love from pakistan
Great
OK
but it is possible to draw FRL on this section and bottom also like OGL level & offset ?
You have to do it on cad. You draw both Profile individually and join them.
unable to install or run thuis application this application require your system to be updated to microsoft common language runtime version 4.0.30319.0
sir when i install the this application then this error will be occur
plz about somethings
SW dtm said excel is not open, please open the spredsheet ad select the correct range, Do you know how to solve this?? thank you
It means it could not detect the opened excel. Is this issue for this specific file or all the time ? Note that it may not detect excel from office 365. Do not select the heading when you select the data. If this do not work for you, save the excel with in *.csv format and adopt Points>Import Points from file and browse the csv file. This should work. In Csv file, do not put heading, just put the data in normal order (Serial number, X, Y, Z, Remark). Do not put any additional columns.
@@rajmohan3134 this issue occure on all files, I tried the CVS method it didnt work as well. Also im using Excel 2016 which might be 360. Do you know any other silution I could try?
@@kazerzozay From my previous experience, it may be due to Excel 360. But the import from CSV is independent of excel version. So your data format may be the problem. So can you share me about first 30 points so that i can check it. Check that 30 points by your self and if it didn't work, share with me in google link (softwelvideos@gmail.com). (Share only if you think it is ok). Alternatively, a newer version is there in Downloads.softwel.com.np . You can use Learner version of SW Road and it has the same SW DTM integrated under Menu>DTM>DTM for Autocad . Hope this will help.
sir plz send me link or setup of sw dtm plz urgently
nice sir,
how to making NH 4 lane road x-section PQC 300mm,DLC 150mm,GSB-150mm with 4m median
Not possible with this software.
YOU CAN DRAW 4 LANE X-SECTION. PLEASE VISIT th-cam.com/video/h3GkDDlEPsM/w-d-xo.html
While importing excel from SW_DTM software it gives Error- First select the correct range and then click OK!
please help me what is correct range what it says?
You need to select the cells of 5 columns in excel excluding headings (SN, X, Y, Z, Remarks).
th-cam.com/video/BarDx1A3W-M/w-d-xo.html
@@rajmohan3134 Sir I had similar problems although I tried this but it shows the same error again
Sir this is not taking point from excel kindly some one guide me please
how to add FRL in cross section
what does FRL mean? If you are talking about Design RL, there is no option for adding it in cross section.
chainage and crossection reading and RL i have ...... how to draw crossection now in SW dtm
You have to convert your data to SW DTM file format. (ie Chainage, Partial Distance, RL and Remark). For Excel sheet to convert to this format from stepping method you can download file from Here: drive.google.com/file/d/1wXkB5dquUyuNfWQzkfEEmownUdFSp7y6/view?usp=sharing
Raj Mohan thank u so soooo much.. even now i dint understand .. i have to copy paste mydata in the format sent by you or what?
I have this format:
sn chainage L 0 R RL
eg 1 0+000 -3 100.00
0 100.15
3 100.05
and after filling data i have for design level .. I want it for QUANTITY CALCULATION.......
You can download sample file from here:
drive.google.com/file/d/0B_9S0W188UoXYTRkS09QQzVuOHM/view?usp=sharing
sir GIS software setup plz send ..
as well as posssible
and my work stop because of sw dtm
dear sir
this software is support any version Auto Cad?
It supports all version of autocad.
what does x, y and z means?
X-Easting, Y- Northing, Z- elevation
THANK YOU.
I want to draw 3 line in profile at a time ,
one line coming existing level,
I need 2 more line : actual level line and required level line.
how ,
I have Data in excel
plz help
urgent.
You cannot draw 3 lines in same profile using this software. However if you have data in excel you can draw 3 different profile and merge them manually.
Raj Mohan how I will merge them,
Send me formula,or excel sheet that can draw line and Thier text value.
mdblaster@gmail.com
I dont have formula. You draw 3 different profile as shown in this video at time 4:45. You see "Read Data from Default file". Change it to "Read Data from excel file". Then you select your data in excel. The format Should be First column "Chainage", Second column "Level" and Third Column "Remark". You can leave remark column blank. But you have to select 3 Columns (without heading). Then other step as shown in the video. After drawing 3 profile, you have to merge them in autocad.
Raj Mohan can u make for me a excel program who can fullfill my requirements.
sir
this software i have used before time but this time automatically block and close. so sir how to i can get this software.please kindly help me sir.thanks
regards buddhi lama,htd.now Qatar
This software is completely free. The developer won't block it. I have never heard or face such blocking problem. Try reinstalling the software from provided website. And please let me know if it solved. Probably we can get solution with discussion.
Does your word "blocking" mean crashing of software?
th-cam.com/video/BarDx1A3W-M/w-d-xo.html
How can I increase text size for numbers and letters in profile and cross section views...Scale ma plot garda ati sano aauxa...nadekhine...
SW DTM has no built-in option to change text size, however you can change text size within autocad. For this follow this instruction:
1)Select any text you want to change.
2)Right click and click on "Select Similar". This selects all the text of pre-selected text group.
3) Type "PR" then hit Enter in commanline. you will get Property pallete.
4) In property pallete, find "Text Height" in text group and change the value. This will change the height of all selected text.
5)Repeat these steps for other text group as well.
thanks...
sir,
How it's possible plz send details
Draw ground profile first. Then draw design level. Then copy design level line to ground level profile. Similarly copy design level text as well
Plz Load or send me the Co-ordinates File :) thank you
th-cam.com/video/BarDx1A3W-M/w-d-xo.html
sir g plz jaldi se setup bejh dain
Download link is on above description
Sir, autocad ko ni video banaunu paryo
Auto cad ko TH-cam ma jati already dherai 6 ta.
xan ta xa dhari lamo video hunxa sikauna chai thorai seka ko hunxa 50 min lamo video ma line tanna matra sekauxa
i had test the accuracy of this program that i found it 74.68% accurate. Which is not a good recommendation.
can I know how did you test the accuracy? (74.68% ????? how)
As for as I used on my project it was correct.
th-cam.com/video/BarDx1A3W-M/w-d-xo.html
Sir plz speak hindi aapka video aachha hai but launage problem
Sorry for the problem. If u couldn't understand the language, just ignore the language and follow the steps. ( Right not I am busy somewhere else. So I cant make new video).
AOA Sir g Sir kindle Lisp Wali Desecription Wali smj nhi ahi wo kaisy krty hi jis k Zareye sy hu. Easily Lisp Commomds Asani sy Downolad kr sakty hi and Sir plz Send mi Mobile no in Used of Whtsap
???
Sir kindly Description mai lisp kaisy download krry gy
This is not lisp file. It is a software called sw dtm. You can download it from softwel.com.np
fake
Its not fake. you may have some problem in your software. please feel free to share your issue. The software is completely free.