Installed a godhand Carbon Splitter Lip on my Mercedes C250 C300 W204
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2024
- How to install a godhand carbon fiber splitter on a Mercedes C-class.
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This help support the channel and allows us to continue to make videos like this. Thank you for the support!
Where I bought my parts:
2012-2014 W204 C-Class Carbon Fiber "Godhand" Splitter
EBAY: ebay.us/eYfGCY
Music Credit
Nopcopyright Sounds
David Bulla - "Highlife"
• David Bulla - High Lif...
DISCLAIMER: This video is NOT endorsed by, directly affiliated with, maintained, authorized, or sponsored by Mercedes-Benz. All of the videos on this channel are for entertainment viewing purposes only. Due to factors beyond the control of FlexxAlexander, I cannot guarantee against improper use or unauthorized modifications of this information. FlexxAlexander assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. FlexxAlexander recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of FlexxAlexander, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not FlexxAlexander.
The before and after is just amazing !! absolutely amazing
FOLLOW ME!!!
Website: www.FlexxAlexander.com
Facebook: facebook.com/FlexxAlexander1
Instagram: instagram.com/Flexx_Alexander
Thanks for the awesome tips... I like how you added the 3M tape to assist with the process. Car looks great!
Thanks for being a viewer. I appreciate a lot! I appreciate the kind words as well. More to come to make sure you subscribe! Thanks again.
Fuckin love these cars bro. Who knew a c250 could be such a good project car to mod. Amazes me every damn day I see it hahah 😂🏎
🤣😎🤙🏼
looks great. thats a gorgeous car
Thanks! Well done! Now I'll try it!
Really well done Flexx. You make it look so easy. From start to finish how long did it take you to complete this mod?
So....I had to remove the splitter first...so I can show everyone how to do the install. The removal took me 2 hours because of the old double sided tape was a pain to take off. Once it was removed and I start shooting my video...the real install only took me literally 30 mins.
Wow. that's amazing. You're very talented !
You did a great job dude
Thanks!
I have the EXACT copy car!!! Thank you for the video
Enjoy!
Nice job Flex
Thanks brother. Appreciate it!
Thanks. This makes it easy
thanks for helping me locate the right one 4 me alex i m loving mine
Thanks for sharing your ride. It’s sick!!! Keep up a great work!
Flexx Alexander I just love it man
Your the man
Thank a lot for the video!
Any time!!!
im copying your build on a pearl white w204. almost finished the cosmetics
Awesome!
Looks so bad ass
My front splitter that I've had for 9 months just exploded on the backroads when I hit a little dip. Not sure how since I've driven that route to hit the highway so many times.. Was truly a sad day.. Now I gotta spend another $320 when I could've used it towards getting the upgraded headlights :[
looks sick
Thanks!!
Can you repost the link for this front splitter please the link posted no longer available
Can’t find it. You can look up w204 godhand. Just look for the one for 2012-2014. That’s the one I bought for my car.
Can you buy that bumper painted black instead of carbon fiber
I like this a lot. Would it look weird if I have a gloss black front splitter and gloss black sides but I have a rear carbon fiber diffuser and wing? Can’t decide.
Nahh. That would look awesome!
My R8 has gloss black front lip, gloss black side skirts, but a carbon wing and diffuser. Still looks awesome.
Plus having gloss black plastic in the front and sides is better than carbon. They will take a beating more than carbon. If I needed to replace a front lip or side skirt, I rather replace them with gloss black plastic instead of super expensive carbon parts.
Hey Flexx is that the actual link and seller you got your lip from?
Does the front bumper ground clearance decrease by the splitter or it remains the same?
Hey flexx I ordered this lip and It came with no holes you think it’ll be a good idea to drill them in?
the link you have for ebay for this part says does not fit 2012 c250 2 door coupe 1.8 turbo?!?!
What kind of screws did u use
Thanks Great Video.. Does anyone have any contact info on D2S manufacturer- I ordered a front bumper spoiler via CarID AND shipping has been a nightmare!! So I'm trying to reach out to D2S directly but there contact information is non existent..???
I have a 2012 C-350 2 door. Need a full lip spoiler with the red stripe. I find them listed for a 4 door and not a 2 door. Is there a difference?
Same fitment as long as it’s the same front bumper. There’s a luxury bumper and a sport bumper. Doesn’t matter 2 or 4 doors.
Probably you were already asked this question several times... where did you get it?
Video description
Do you happen to know where I can find a splitter for the w208? Its the old clk class body style
what size rims do you have?
Muy bien
can you please give us some suggestions about performance rims for w204
If you want performance, then get forged lightweight wheels. There’s nothing more to it than that.
Hi flex. Where Can I find front splitter for my mercedes c350 2011. Since its a different year, will the installation be different? Thanks!!
You can find it all over eBay. Just make sure it fits your bumper since there’s usually 2 splitters. One for the luxury front bumper and one for the sport bumper. Installation should be the same.
Hey ive been trying to find is the w204 front splitter fit w207 ?
do the screwholes in the bumber reduce its worth? if so, considerably?
honestly, you drill them in the underside so I wouldn't think you would see them anyhow.
If the item doesn't come with pre-cut holes how should we install it? Make the holes ourselves?
Yes
@@TheFlexxGarage Raymond used rivets but i feel like thats over kill. Do you think self tapping screws are strong enough?
I used regular screws. And I’ve never had an issue. That should say enough.
It just received it today. I was surprised that it felt cheaper than I thought. The cf rear diffuser felt a lot better than the splitter. But in video it looks a lot better.
nice. Would this fit my 12 c63 Coupe? Thanks!
Unfortunately it won’t. The c63 has a different front bumper and you will need to buy a carbon fiber splitter that fits just for the c63.
Flexx Alexander thank you.
I'd be a bit worried about ground clearance
I live in New England. I drive through snow, potholes, uphill, downhill, and everything. Never had an issue. My car is still on stock suspension.
I don't think I've ever scraped it even on a steep driveway.
You'd be surprised how well the clearance is.
The only thing you need to be cautious is you might slam into the curb if you park head on. But even without the splitter, nobody should be parking with their front bumper that close or above the curb.
Damn!!!! it does make a big fucking difference !
Big time!!!
Where did you buy it? I need to get one for my C350
Look in video description
I have a 2012 c 300
Do you have link of the splitter n diffuser please
I don't. I bought them a year ago. Just go on eBay and search "w204 godhand splitter" and "w204 big fin diffuser". There's tons of resellers.
How to buy?
hello this front lip will fit on w204 before face
No
@@TheFlexxGarage can you tell me where to find a front lip for bumper replica of C63 before face
Hi mate how did u blackout the chrome trims?
First you’ve got to remove all the chrome trim pieces than WET SAND them down LIGHTLY ( just enough to rough up the surface enough for paint to adhere properly ). Next it’s best to take a higher grit sand paper, maybe 120-180 grit and lightly dry sand again after drying & cleaning off any debris left from the wet sand to smooth out any tiny ridges or uneven spots. Final step is to paint all desired trim pieces and re-install everything. Or you can skip all of this and just order a black trim kit for your specific vehicle. Hope this helped ✌🏼
Is this the sedan one or any one would work ?
Sedan and coupe uses same front bumper if they are both the sport models. So the diffuser fits both cars.
Where can I find the grille you have on it?
I don’t know. eBay? www.ebay.com/itm/145186533667?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=h3odoarlrsa&sssrc=2349624&ssuid=QAbFmFZeQea&var=&widget_ver=artemis&media=COPY
Where did you get your one piece front lip ?
Look in the video description
Does anyone know if this splitter would fit a c63 w204
No. The c63 has a different front bumper.
Do the screws damage the car in anyway?
they dont , youll have holes in your car thats all..
it shouldn't, it just mounts to your front bumper
Looks sexy bro
Is it the same for the c180
if you have a facelift amg line model, yes.
Would this fit my 2011 C300?
No. You need to buy a splitter that fits your 2011 style front bumper. Your bumper is different then the 2012-2014 models.
Would this fit my 2013 C300
Yes, as long as you have the sport bumper (non luxury). Sport bumper will look like mine.
What size rims do you have in the thumbnail photo Flexx?
go watch this video th-cam.com/video/r_yJJxXHslM/w-d-xo.html
Duck tape wouldn't strip paint
didnt strip mine, well atleast to my eyes