I already have 2 SPL meters. The going db level is 75db, and if you want the subs to run a little hot, 80 to 82db! I have Techno Dad’s/Joe n Tell’s Spatial Audio Calibration Disc, to calibrate my system!
Thanks for this. It made me get out the manual for my 2002 vintage RadioShack 33-2055A. The functions and range (32-10khz) are similar, but the interface, memory and display are what you'd expect from the age. Heck, I didn't even know it had continuous monitoring then recall of min and max until tonight 🙃
I was just looking at buying a DB meter. I'm currently redoing my system . I've just recently discovered your channel and have been watching your older videos. #MICMEUP
I like the size of the unit nice and small easy to use and I think the light is a plus because I don’t want to have the lights on when I’m setting the db using the phone app which is ok but a call would interfere with my reading and I have to do it again. Another great video and product. Thanks and keep up the good work.
Thanks so much for the great video! I just bought the same meter. However, it seems like even 75db per channel is way to loud for my smaller living room. Maybe I should shoot for 65db? I sit approximately 9ft from my TV. Using definitive technology bp9060 and CS-9060 for L,C,R. Definitive Technology BP2X surround L/R. What type of microphone stand would you recommend using? Thanks again for any further assistance
It's just a reference point. You use this number to make sure your speakers have the ability to play that loud but you definitely don't have to turn the volume up that loud when watching
Typically, you point traditional mics up in the air because the physical microphone holes are on the side. So to face the mic hole forward, you face the mic housing up. If your mic is omni directional then point out up like you're mentioning
Fun review. In my opinion don't waste money and time on this device if you don't need something that is mobile.. Save up some more and get a calibrated measurement microphone and hook it up to your computer with freeware REW. Now you will be able to learn something. You will easily do the same dB measurements from each speaker. You will get dB from ~10 Hz to 20 kHz in a graph that is more valuable. So you can see the dB at every dB and see dips or peaks from each speaker and NOT something silly as A, B, C and D weight dB they don't measure dB at the same level as a calibrated microphone that is gain 0 dB in it's whole frequency range and that specific individual microphone is calibrated and compensated to be just that. This dB microphone is measuring -50 dB (!) at 20 Hz for A weight and for C weight we have -4 dB as a example. You can verify that your software is doing the same thing on left and right and there is no software issues in newer calibration sessions or software versions from Dirac and the alikes. The thing to note sound speed (and dB) varies with temperature and humidity basic knowledge. (That is one example what I meant with learning.) So that is why you got those measurements also in your dB meter. So don't heat up the device with your hands that will give you false readings. For example if you want to measure the neighbors fan noise (that is constant) but at different temperatures or humidity you can document those dB measurements so that is a use-cases that mobility is nice to have.
That's a good tool to time align the subwoofers to the front drivers at the seating position. Basically, it gives a smooth transition from the subwoofers to the front drivers. Thus getting a flat response. I've been using REW (Room EQ Wizard) to accomplish that. I think that SPL meter is cool. I'll just go ahead and buy it. Good presentation. 👍🏿👌🏿
It's It's only way to measure spl. Find out what your reference level is on your receiver. It's 0db on the volume knob if you're using negative db value
@Kpaceguy I.just don't know any other way? To get 75db I've got to up ,the volume to + 9.5db, I have the polk xt speakers, xt70, xt15 , xt35 , svs 1000sb
Hey abbiiee! I'm picking you as the winner. You were the first person to leave me the hastag #micmeup yesterday. Shoot me an email at Kpaceguy@gmail.com
I already have 2 SPL meters. The going db level is 75db, and if you want the subs to run a little hot, 80 to 82db! I have Techno Dad’s/Joe n Tell’s Spatial Audio Calibration Disc, to calibrate my system!
I have a test meter for my system now, but this unit is nicer. I'll check one out. Good demo! 👍
Thanks for this. It made me get out the manual for my 2002 vintage RadioShack 33-2055A. The functions and range (32-10khz) are similar, but the interface, memory and display are what you'd expect from the age. Heck, I didn't even know it had continuous monitoring then recall of min and max until tonight 🙃
I was just looking at buying a DB meter. I'm currently redoing my system . I've just recently discovered your channel and have been watching your older videos. #MICMEUP
I appreciate it
I like the size of the unit nice and small easy to use and I think the light is a plus because I don’t want to have the lights on when I’m setting the db using the phone app which is ok but a call would interfere with my reading and I have to do it again. Another great video and product. Thanks and keep up the good work.
I appreciate it!
Always helping! What a diamond geezer 👏
I appreciate it
Thanks for the vid.
@@joemedic710 thanks for watching
#MICMEUP
Great method for setting up. Especially for home theater.
#micmeup
I used my phone when I set my speaker levels and it worked in a pinch. This would have been nice to have. Great review👍
Thanks so much for the great video! I just bought the same meter. However, it seems like even 75db per channel is way to loud for my smaller living room. Maybe I should shoot for 65db? I sit approximately 9ft from my TV. Using definitive technology bp9060 and CS-9060 for L,C,R. Definitive Technology BP2X surround L/R.
What type of microphone stand would you recommend using? Thanks again for any further assistance
It's just a reference point. You use this number to make sure your speakers have the ability to play that loud but you definitely don't have to turn the volume up that loud when watching
Gotcha. Thanks 👍
But if you have a 2 seater, how does one ensure 75db across those 2 seats? Can you give an in-depth explanation or or make a video regarding this
I have a two-seater, and I put my mic in between those two seats
@@Kpaceguy Is it a decent compromise for the MLP? And how does it compare overall to just calibrating for one seat
@BrendanEvansX well when you run calibration it should have you doing at least 5 positions. In the MLP and everything around it
I read you should be pointing the spl meter upwards when measuring spl.
Typically, you point traditional mics up in the air because the physical microphone holes are on the side. So to face the mic hole forward, you face the mic housing up. If your mic is omni directional then point out up like you're mentioning
#MICMEUP looks great!
#micmeup great video and seems like a perfect replacement for old radio shack meter
Thank you sharing.
May I ask what should I setup on the SPL Meter when using it to measure my home cinema speaker system?
Slow A weight should do just fine
@@KpaceguyThank you very for your reply
One more, what is the master volume level should be during the sound measure?
@@chijames9960 0db
#MICMEUP
This would be a useful tool to have in a home theater set up.
#micmeup This looks way better than the phone app I use. Cool product, always look forward to your videos.
I appreciate it!
Fun review.
In my opinion don't waste money and time on this device if you don't need something that is mobile..
Save up some more and get a calibrated measurement microphone and hook it up to your computer with freeware REW.
Now you will be able to learn something. You will easily do the same dB measurements from each speaker. You will get dB from ~10 Hz to 20 kHz in a graph that is more valuable. So you can see the dB at every dB and see dips or peaks from each speaker and NOT something silly as A, B, C and D weight dB they don't measure dB at the same level as a calibrated microphone that is gain 0 dB in it's whole frequency range and that specific individual microphone is calibrated and compensated to be just that.
This dB microphone is measuring -50 dB (!) at 20 Hz for A weight and for C weight we have -4 dB as a example.
You can verify that your software is doing the same thing on left and right and there is no software issues in newer calibration sessions or software versions from Dirac and the alikes.
The thing to note sound speed (and dB) varies with temperature and humidity basic knowledge. (That is one example what I meant with learning.)
So that is why you got those measurements also in your dB meter. So don't heat up the device with your hands that will give you false readings.
For example if you want to measure the neighbors fan noise (that is constant) but at different temperatures or humidity you can document those dB measurements so that is a use-cases that mobility is nice to have.
How do i mesure subs with it mine just say my speakers are 80db and when i use it on sub says 45db
Means your seating position is in a null or dead spot and either your seats need to move or the sub does
That make so much sense i Will try to mave around with it and see if its make a difference thanks
@@frederiknielsen9023 let me know!
That's a good tool to time align the subwoofers to the front drivers at the seating position. Basically, it gives a smooth transition from the subwoofers to the front drivers. Thus getting a flat response. I've been using REW (Room EQ Wizard) to accomplish that. I think that SPL meter is cool. I'll just go ahead and buy it. Good presentation. 👍🏿👌🏿
I appreciate it
#micmeup
Yaayyyy! A giveaway! Where's your honey?
She's working! Dental assistant
Is it better to measure SPL ast “Reference “ level and if so how does one do that
It's It's only way to measure spl. Find out what your reference level is on your receiver. It's 0db on the volume knob if you're using negative db value
MICMEUP
I NEED AN SPL
When measures the subs also they have to be at 75db??
Most people run them a little hot at 80db. It's personal preference how loud you like them but to balance them you'll want them around 75db
#micmeup Awesome video ! been looking for a device like this ...Excellent demo
Glad it was helpful!
MICMEUP
#MICMEUP
#MICMEUP
I’ve been using the old school analog SPL meter from RadioShack. My dad gave me and the needle keep sticking.
those are good meters . one thing when using it , set your avr volume to reference level , which is zero
#Micemeup, I use to have the old RadioShack meter but I don't know what happened to it.
Hi ive used same spl meter to reach 75db on my 5.1 and all the levels are nearly at + max to get to 75db will this be ok for my speakers life??
You shouldn't have to go to max for every speaker. What volume level is your receiver set to when running calibration?
@@Kpaceguy hi , 0
@@Kpaceguywould I need an amplifier to boost my speakers ?
@elloco271 It could help but I don't think it'll make a drastic change
@Kpaceguy I.just don't know any other way? To get 75db I've got to up ,the volume to + 9.5db, I have the polk xt speakers, xt70, xt15 , xt35 , svs 1000sb
#MICMEUP 👍👍
#MIKEMEUP
#micmeup thanks for another great video!
#MICMEUP
#MicMeUp 😉👍🏼
#MicMeUp
#micmeup been looking at getting a mic vs my phone spl meter
#mikemeup
Mic me up. According to your instructions
#micmeup
I’ve used an iPhone app but would love to see if it’s remotely as accurate
YO! Kpaceguy, #MICMEUP
#micmeup
As an Audio enthusiast really need one
#micmeup 😊
#micmeup
😮
#Micmeup
#micmeup boss
#MICMEUP please. It sucks using my phone!
#Micmeup peace
Mic Me up
#MicMeUp 😊
Hey abbiiee! I'm picking you as the winner. You were the first person to leave me the hastag #micmeup yesterday. Shoot me an email at Kpaceguy@gmail.com
#micmeup Looks like a great product.
Micmeup
#mikemeup
I really need one👍🏿
#micmeup
#Mic me up
#MICMEUP
MICMEUP
#Micmeup
#micmeup
#MICMEUP
#MICMEUP
#MICMEUP
#MICMEUP
#micmeup
#micmeup
#micmeup
#micmeup
#micmeup
#micmeup
#micmeup
#micmeup
#micmeup