That's a very neat and precise build, that jig for your dremel looks very useful. I've actually ordered a table saw, looking forward to start using it, no more crooked imprecise cuts with a regular circular saw.
Great job, very nice look and you build it in right way (I have look a lots videos) and most important - great sound ! Congrats ! I vatched few min's before some guy called him self a PRO, he made nice looking box but it sounds like I will never post that video if I was in his place LOL :) You got this 100% ;) Thanks for sharing !
Beautiful and net Job. Some people don’t understand this a very basic but proper way to build a nice bass box which will give you nice results if you need something to save space and have an extra kick for your stereo system. Of course if you need something fancier and more powerful there are more complicated and different ways to do it and of course more expensive.👍
try to put acoustic wool on sides and back. many times will help to get lower Hz and it can add some dB. and also wrap cable in some soft of foam to prevend cable rattle against box. longer port might lower Hz even more. i dont know if that woofer has removable plastic magnet cover. if yes remove it. many times cousing rattle.
the use of acoustic wool is only in case of small enclosures in tight spaces to "virtually" enlarge and reach the desire volume, if your volume is correct no wool is needed, but if its is correct an you add acoustic wool, the sub only will over damp (move in excess) because it sees a "larger" enclosure, causing the coil to travel more than its regular stroke design and probably short and fail due to coil friction in the higher/lower parts of the magnet channel, that's how i blow a couple of subs in the past, remember to reduce 5-10% the box size and you probably have a clean, quiet an loud sub....like this one in the video
"many times will help to get lower Hz and it can add some dB" Depends on the enclosure, and project goals. The other issue is the type of damping makes a huge difference! It can either kill a drivers performance or enhance it. When you add damping, you're opening a can of worms!
Boa tarde. Excelente trabalho parabéns. Tenho um subwoofer slim cadence 12" quero fazer uma caixa que não ocupe muito espaço no meu carro. Meu carro é um fox. Quero também colocar um falante pra voz. O que me sugere?
Magnífico trabajo compañero....una duda....¿no hay que poner material absorbente de relleno en el interior del cajón?...¿las medidas de su proyecto, serían compatibles con un altavoz de diez pulgadas?....muchas gracias por su aportación amigo....un abrazo....
Did you use the actual specs for the speaker? And what about sealing the joints with caulking? I built my own with my uncle and didnt use any caulking or the right specs. When we finally did use the specific dimensions set by the manufacture, the results were amazing. I had 2 ten inch sony explodes, then went onto one 15 inch clarion. The two tens pumped way better. Running on a 240 watt kikr amp. Bridged. Oh i miss the bump, but im not a kid anymore. Need that room for more practical stuff.
hey bud, nice and clean job man. so, you used MDF wood, correct? I need to the exact thing for my sierra. can i get the measurements please? thanks bud
1.Always use screws on your boxes. Glue alone shreds from vibration. 2.This box is very small for band pass. Should be a sealed unit as long as you have enough power to drive it. And 3. Should be facing backwards not upwards (better performance and protection of the speaker). But i'm liking and subscribing because i love your videos.
I was going to ask if that port hole is sufficent... I've seen other box builds on YT where the box port was very long!! One was a down firing JL 10TW3-D4
Good morning, my friend, I want to make a box like this for a 12 "250w rms subwoofer which would be the measurements in centimeters of each 15mm mdf piece.
Screws or nails are only used to hold it together till the glue dries, the glue is what keeps it together. I see you tinned the speaker wires, then attached the banana plugs, then stuck them under the speaker wire lugs... you didn't need the banana plugs, was a waste of money in that situation. I would have mounted the speaker offset to the side and mounted the amp on top next to it. The only other thing I'd have done is add some bracing, and make sure there were no air leaks.
Makes it more professional looking indeed, but I would only do that if I had free solder and banana plugs for life. Other than that, bare wire is fine. Yeah the amp on the box would be a great idea with standoffs too.
If the box is stiff enough, vibration will never be a problem, and it's vibration that can cause components to fail prematurely, a stiff box is required for maximum efficiency anyways, so adding a second layer of MDF in which to mount the amp to would further reduce vibration, internal bracing will also help, soft rubber between the amp and box is yet another thing that can reduce vibration transfer to the amp.
Bom diaaa, kara ficou tooppp, tenho uma ranger 2010 /2011 E quero colocar uma caixa de grave dessa atrás do banco , por quanto vc faz uma completa tipo essa aí ?? , qual telefo e pra contato ?
"but then you lay it on its back and make half the boot unusable?" If you don't like that, you won;t like this - www.google.com/search?client=firefox-b-d&q=friv
Oh man, I like that jig you used to cut the holes! I've been wondering about the best way to get perfect holes. I suppose you can buy them at most hardware stores, ay? I already have a rotary cutter - basically Sears version of a dremel. But that jig is brilliant..
BZRK AUDIO I'll have to check but I inherited some older Dremel attachments and I think that's one of them. As soon as I saw it in the vid I knew I needed to find it.
I love watching peoples videos that take pride in their work! Well done sir!
Que serviço mega maravilhoso, vc está de parabéns!!!👏😎
Um brasileiro 👊
Exactly the same in my car..even a speaker . .
Thanks for uploading ...this vedio
That's a very neat and precise build, that jig for your dremel looks very useful. I've actually ordered a table saw, looking forward to start using it, no more crooked imprecise cuts with a regular circular saw.
I just don't understand why people cut with a circular saw, freehand, and expect perfect results.
Very good job ! Nice ! I have exactly do the same ! Perfect result ! ( with kenwood WPF good but kicker solobaric, more effect ! )
Really well done! Should sound amazingly!
He made that look super easy. Awesome vid.👍👍
Great job, very nice look and you build it in right way (I have look a lots videos) and most important - great sound ! Congrats ! I vatched few min's before some guy called him self a PRO, he made nice looking box but it sounds like I will never post that video if I was in his place LOL :) You got this 100% ;) Thanks for sharing !
Beautiful and net Job. Some people don’t understand this a very basic but proper way to build a nice bass box which will give you nice results if you need something to save space and have an extra kick for your stereo system. Of course if you need something fancier and more powerful there are more complicated and different ways to do it and of course more expensive.👍
more complicated and different ways to do it and of course more expensive
Do you mean like this? - th-cam.com/video/vKm3g0d9foQ/w-d-xo.html
Very clean build . What type carpet did you use ? Looks thicker that the cheap carpet you see on other boxes .
it sound awesome man great job i wanna do that Lit bass sounds !
Nice work!! That's a very slim box
Clean and professional. Nice work! 🧰
Yes man u r the best one.. You tell each and every thing no matters is easy or hard but u tell every thing hats off u
i like this beat dude and Abou the box,too cool! congratu... ;)
well made sir well made :) like your way of putting on carpet that was way different then i was taught :)
really good finishing i wish could make one for my car rest i can do but dont have few machines to cut the wood
Oh boy! What a clean build.
First sub box vid I watched when I was 13,17 and still loving my hobby😁
beautiful work perfect sound
Emthesage EMM loki
Agreed!
Wow!!! Great quality of craftsmanship! Definitely would get a box made by you! 👍🏼
Looks great in the trunk. Fits nicely.
Nice Job!
Congratulations for you from Hungary!
The video and box construction are first rate. Nicely done, and thanks for this!
Great job and nicely built. Sounds awesome
and also can u please share the dimensions....
try to put acoustic wool on sides and back. many times will help to get lower Hz and it can add some dB. and also wrap cable in some soft of foam to prevend cable rattle against box. longer port might lower Hz even more. i dont know if that woofer has removable plastic magnet cover. if yes remove it. many times cousing rattle.
unless
it's all tight and glued up. no magnets.
the use of acoustic wool is only in case of small enclosures in tight spaces to "virtually" enlarge and reach the desire volume, if your volume is correct no wool is needed, but if its is correct an you add acoustic wool, the sub only will over damp (move in excess) because it sees a "larger" enclosure, causing the coil to travel more than its regular stroke design and probably short and fail due to coil friction in the higher/lower parts of the magnet channel, that's how i blow a couple of subs in the past, remember to reduce 5-10% the box size and you probably have a clean, quiet an loud sub....like this one in the video
Idiot... ITS PORTED it doesnt need that gay ass wool. If you arent an idiot, and build a box the correct size, you wont need that dumb shit.
"many times will help to get lower Hz and it can add some dB"
Depends on the enclosure, and project goals. The other issue is the type of damping makes a huge difference! It can either kill a drivers performance or enhance it. When you add damping, you're opening a can of worms!
Boa tarde. Excelente trabalho parabéns. Tenho um subwoofer slim cadence 12" quero fazer uma caixa que não ocupe muito espaço no meu carro. Meu carro é um fox. Quero também colocar um falante pra voz. O que me sugere?
Its so satisfying to watch your videos :D
Amazing how a good quality video can educate you :)
Muito bem feito Parabéns.
this is the first time i see building speaker box without using wood screws.👍
What do you need screws for? I've always used clamps. Much cleaner!
Magnífico trabajo compañero....una duda....¿no hay que poner material absorbente de relleno en el interior del cajón?...¿las medidas de su proyecto, serían compatibles con un altavoz de diez pulgadas?....muchas gracias por su aportación amigo....un abrazo....
Looks like a great enclosure...did you figure out the tuning of the port..
by the length and size of the port and size of box id say its tuned pretty high....
Love ur work pal... Would u mind telling me length nd width of ur box?
Did you use the actual specs for the speaker? And what about sealing the joints with caulking? I built my own with my uncle and didnt use any caulking or the right specs. When we finally did use the specific dimensions set by the manufacture, the results were amazing. I had 2 ten inch sony explodes, then went onto one 15 inch clarion. The two tens pumped way better. Running on a 240 watt kikr amp. Bridged. Oh i miss the bump, but im not a kid anymore. Need that room for more practical stuff.
Thanks for the video, Let me know materials which you using to finish (Black mat and Spray)? thank you!!!
MDF
This is best box making video
Well, can I show you mine?
th-cam.com/video/y6_GbYeeFwE/w-d-xo.html
it matches the trunk of your car really well!!
Beautiful work man
Классный коробки! 👍👍👍
Super robota, jak się sprawuje ten subwoofer ? Ile ma RMS, a ile dostaje ?
A real pro.
I enjoyed watching your video
What are the measurements for this box ?
hey bud, nice and clean job man. so, you used MDF wood, correct? I need to the exact thing for my sierra. can i get the measurements please? thanks bud
Nice one! It gave me some thoughts how to put on fabric on my box.
1.Always use screws on your boxes. Glue alone shreds from vibration.
2.This box is very small for band pass. Should be a sealed unit as long as you have enough power to drive it.
And 3. Should be facing backwards not upwards (better performance and protection of the speaker).
But i'm liking and subscribing because i love your videos.
the manufacturer recommends this small box with only 22.6 liters for this driver. And this is NOT a band pass enclosure, is a Bass reflex. Regards
@@leo83bmx71 Whats a bass reflex box? And shouldnt the port be way "longer"?
I was going to ask if that port hole is sufficent... I've seen other box builds on YT where the box port was very long!! One was a down firing JL 10TW3-D4
I have to know. Did you really cut those circles in one pass using a Dremel? Or did you go around multiple times in increments? What bit did you use?
Good morning, my friend, I want to make a box like this for a 12 "250w rms subwoofer which would be the measurements in centimeters of each 15mm mdf piece.
Muy bien trabajo, Disculpa a que ángulo hacer tus cortes
good job bro!
Screws or nails are only used to hold it together till the glue dries, the glue is what keeps it together.
I see you tinned the speaker wires, then attached the banana plugs, then stuck them under the speaker wire lugs... you didn't need the banana plugs, was a waste of money in that situation.
I would have mounted the speaker offset to the side and mounted the amp on top next to it.
The only other thing I'd have done is add some bracing, and make sure there were no air leaks.
Makes it more professional looking indeed, but I would only do that if I had free solder and banana plugs for life. Other than that, bare wire is fine. Yeah the amp on the box would be a great idea with standoffs too.
If the box is stiff enough, vibration will never be a problem, and it's vibration that can cause components to fail prematurely, a stiff box is required for maximum efficiency anyways, so adding a second layer of MDF in which to mount the amp to would further reduce vibration, internal bracing will also help, soft rubber between the amp and box is yet another thing that can reduce vibration transfer to the amp.
Either way standoffs are a good idea.
Nice job
Muy pulido para trabajar gracias por tu video muy instructivo
Caracaaaasssss mano ficou muito top top👍🏻👍🏻👏🏻👏🏻 eu tenho uma subwoofer 12 de 90 X 50 X 50cm posso diminuir devido porta malas pequeno do Fox?
This is a super clean build
Very nice build 👍🏽👍🏽👍🏽
the work is very simple and very good!
That was some cool shit man
Nice work, and perfect sound
Lo mejor de este vídeo son las herramienta de trabajo que utiliza tienes de todo
Hey bro what's the spray glue you used to stick the fabric to the box?
By the way good video =)
ChicoSalsa 01 contact cement
Semen
esperma
At first I thought: "damn that's some ugly carpet" but then I saw how well it fits with the car. Great job man, keep it up.
the carpeting part was soo smooth wow
Great vid very clean 👍
Your videos are always entertaning ❤
Muchas gracias por tu video, es necesario hacer agujeros para la salida del aire? Gracias de nuevo
parabens pelo belo trabalho!!!!!!!
Amazing job
I want one...lol that is awesome!
Thank you for this.
Completely confirms that a ported enclosure that isn't taking up the entire trunk CAN work!
wow, super clean job… love it…
Can I know all detail of it?
I want to have one for behind my car seat.
Thank You.
Kenwood KFC-WPS1200F
th-cam.com/video/5VcrhrKv08I/w-d-xo.html
Plz send me ful box & subwoofers RMS details
What is the port tuning on that box?
süper olmuş eline sağlık
great.!
Хороший компактный корпус!
link for the adapter u use to make the circles??
Inspirational video . Thank You 🙏💯 I shall post my work Also.
Bom diaaa, kara ficou tooppp, tenho uma ranger 2010 /2011 E quero colocar uma caixa de grave dessa atrás do banco , por quanto vc faz uma completa tipo essa aí ?? , qual telefo e pra contato ?
Beatiful yes great !!!
What's the port lenght? Did you do any calculations to tune the frequency? Thx.
is this design just based on the space available , or is it actually tuned to the cone etc , no internal dampening etc , just makes me curious
You can tell by the place where the box is, under the seat
@@mjtoodsteem2206 The box is not under the seat, it's in the trunk.
Where did you get that circle cutting tool for dremel
That’s cool and everything but no excursion from the sub?
Do you know Thiele/Small parameters?
_ S3vv3n_ lol
I like the nice thin box, good use of a shallow mount sub - but then you lay it on its back and make half the boot unusable?
"but then you lay it on its back and make half the boot unusable?"
If you don't like that, you won;t like this - www.google.com/search?client=firefox-b-d&q=friv
Could you please inform me of the measures of your project, please? would be perfect for my trunk !! Thank you!!
Oh man, I like that jig you used to cut the holes! I've been wondering about the best way to get perfect holes. I suppose you can buy them at most hardware stores, ay? I already have a rotary cutter - basically Sears version of a dremel. But that jig is brilliant..
BZRK AUDIO I'll have to check but I inherited some older Dremel attachments and I think that's one of them. As soon as I saw it in the vid I knew I needed to find it.
You can make your own. TH-cam search - Circle Jig
Excelente video 👌, genio, 👍 te felicito,un abrazo desde Entre Ríos Argentina
Do you make and sell for other people? I would like this box made for a 2001 Expedition
M.N. Projects
Can u make a knife from Prince of Persia which was used by this/those Ngbaka ?
Now thats a sweet sound.
Por favor qual a medida dessa caixa?👏👏👏🇧🇷👍da pra usar sub de 12 polegadas?
daj mate lub inne wyciszenie w środku lepszy efekt. Robota pierwsza klasa
Who needs a cordless drill, when you’re able to use a screwdriver by hand much faster!
nice job and sounds good, however the speaker recessed would make it look better.
longer demo music please!
Wow 1.5 million views comgratulations!
Very nice job and very good
AXWAMMMM talente
axwammm work 😂😂😂😂🤣😋😍😍😍
SUPER ! What model of this subwoofer?