I’m confused why he’s holding the decomposing lever. 🤦♂️ twists the throttle obviously knowing there’s an accelerator pump 😂 it’s so easy to flood them.
El diseño de la moto es excelente!! Felicitaciones al que la hizo!! y para los que critican, por favor no sean tan miserable y dejen la envidia de lado!
Gente para los que critican al loco del video... Si demoro en prender y podria haber acortado el video , pero vayan ustedes a prender una moto 600cc con la patada , tienen que buscarle bien el punto al motor porque sino con la compresion de un 600cc sube con mucha fuerza y te arranca la pata , ya es doloroso que te pase con un 125cc , no es una bobada!!
+superchapin2g sisi, pero me gusta el estilo sin edición, ademas es divertido ver al gordo hacer fuerza y transpirar para poder darle arranque. Leete los comentarios anteriores de lo que opina la gente del gordo.
interesting build. needs a much better, more solid muffler mount or else that thing is gonna snap off from the engine vibes. also, needs a slimmer rear tire. that fat tire is pinched so bad you couldn't ever lean the bike far enough to get to the edges. the result will be huge unsightly "chicken strips" at the edges of the rear tire.
Hmmm not really digging the sound, I think a good can would make it sound a lot better. Other than that solid bike tho. Just wondering why the engine doesn't even seem to be turning over when he's kicking it?
It's a 600cc single cylinder. To facilitate kick starting, the XR has a system to open the exhaust valves a bit before full compression that's hooked up to the kickstarter, allowing you to turn the engine over with your foot, but it can make for tricky starting sometimes.
starts like Crap !, my XR 600r drinks oil more than gas. and always start on first kick even after sitting 6 months. and yes that sound is shit. sounds like a 250 with that sharp sound.
Kicking but too cool to wear boots? He'll learn. Athletic shoes aren't for riding either unless you don't really like having feet. They also melt when they touch hot exhaust.
What a beautiful small cc cafe bike made from a rescued older Honda. A great cafe' for someone that is 5'-5'6" maybe 8", certainly not that slothful out of shape man that took so many times to simply start that gem. If he was the rescuer of the Honda I applaud him for his crafmanship, but I must say that he not only embarrasses himself and his lineage but also the historical name of Honda by his slothful representation. I have built many custom, one off, show and commissioned builds and I would nor could imagine misrepresenting my artwork in such a demeaning manner. You sir, should be ashamed, if you are not, I am for you. Whether you deserve it or not is not the question, it must be said on behalf of custom bike builders worldwide.
bigbearbland a cb200 or a cb350 is a small cc cafe bike. Any single cylinder bike over 400cc's is referred to as a "thumper" because of the large diameter of the single piston. This is not a small bike, it just looks that way next to that gargantuan Sloth-Bear trying to start it...
La moto esta bien armada (dentro de los gustos de cada uno), pero jamas vi a un tipo tan inútil para arrancar una xr600. Pero lo mejor es que si no aprende, va a bajar de peso el gordo. O al menos la pierna derecha!
more like a street fighter than cafe racer. Not diggin it. jeeze, start the damn bike, you're 1 minute into the song! the other cafe racers beat you back before the song ended
Agreed, ust looks like a street-fighter. No offense though, I tried to turn my Ninja into a cafe racer as well and ended up with similar lines. Rough go getting started still and sounds like its running through a Mountain Dew can
![[FULL EP.14] เซียนหรั่ง สอน มาร์ชจุ จับปูนา ฮากระจาย | เฮ็ดอย่างเซียนหรั่ง | One Playground](http://i.ytimg.com/vi/M8mPjd_T2lo/mqdefault.jpg)
Someone please teach this guy how to kick start a bike! Amazing build though! ;)
I’m confused why he’s holding the decomposing lever. 🤦♂️ twists the throttle obviously knowing there’s an accelerator pump 😂 it’s so easy to flood them.
Muito bonita.
Mais demorou a pegar.
Isso para vender avacalhar.
Show
El diseño de la moto es excelente!! Felicitaciones al que la hizo!! y para los que critican, por favor no sean tan miserable y dejen la envidia de lado!
Gente para los que critican al loco del video... Si demoro en prender y podria haber acortado el video , pero vayan ustedes a prender una moto 600cc con la patada , tienen que buscarle bien el punto al motor porque sino con la compresion de un 600cc sube con mucha fuerza y te arranca la pata , ya es doloroso que te pase con un 125cc , no es una bobada!!
Facundo Planzzo yo la prendo solo necesito un fosforo y gasolina y en un segundo
V""
From what bike is the rearwheel and was it an easy fit?
Pretty cool bro decent build.
nella sul serio.....e stato fatto un bel lavoro....e un gioiellino...sembra un opera d arte👍
Interesting how the Bol D Or tank fits!
El tanque es de una yumbo speed 125 q venden en uruguay
Beautiful bike 🏍
good idea grunty motor light weight set up. But please learn how to get top dead center then it will start first time everytime.
Super !
Really nice!
Minuto 1:08 arranca la moto, se desconoce en que momento del vídeo deja de humear
ajajajaj sos groso
Mal de aros o retenes de valvula esa "café"...
Jaja...segui con tu motomel!!
exelente!!! 😱
la llanta de atras esta instalada al reves compa
not really digging the 1981 750 tank but the rest of the bike is great. love the stance with the mono
it's a cool cafe racee i want that bike so i can ride in the phillippines
Super bike!
ahh the good ole decompression lever
Bueno modificación
muy buena
very nice bike
オフロードベースのカフェレーサーは難しい
Great project !can you indicate the kind of rear wheel you use for this project and modifications needed.
Thanks.
+Yaniss49 I dont know, it was one of the best bikes of the bike show.
It was called: "armado fuera de fabrica" (AFF).
+Yaniss49 Looks like he has used all Honda MC22 parts for wheels brakes and suspension.
Fuel tank looks like early Honda CB
Clever. ! squeak stormy What's your opinion about that, guyt 1!
Chéeeee, te has disparado un buen video y la moto está fenomenal, pero nos pudiste haber ahorrado la agonía del primer minuto con un poco de editing!
+superchapin2g sisi, pero me gusta el estilo sin edición, ademas es divertido ver al gordo hacer fuerza y transpirar para poder darle arranque.
Leete los comentarios anteriores de lo que opina la gente del gordo.
Jajaja. Como decimos aquí en mi tierra: "Le tocó sudar la camisola al gordito este."
hermosa capo,, divina por todos lados.
es el cuadro original modificado? me encanta
you will eventually get it started?
оба колеса !!!)))резина на оборот
I want to see the CBR 600 RR & CBR 1000 RR stripped for cafe racing, because I've never been a fan of fairings, anyway.
muito bonita files que
The both tires are mounted backward!
Pobre xr 600 .
Looks good, sounds like a bag of shite lol
its just the way the big thumpers sound
what location is this?
+fabi zuppi Buenos Aires, Argentina.
interesting build. needs a much better, more solid muffler mount or else that thing is gonna snap off from the engine vibes. also, needs a slimmer rear tire. that fat tire is pinched so bad you couldn't ever lean the bike far enough to get to the edges. the result will be huge unsightly "chicken strips" at the edges of the rear tire.
Avus95 More than a slimmer rear tire it needs a slimmer dude to start it. That poor bike was suffering under all that weight.
A. Zak didnt want to start. Affraid fat prick was gonna ride it
Where can I find more info (picture, videos) of this bike?
+Omar David Matar Guerrero Maybe on facebook. This was an Expo Called: " Armado Fuera de Fabrica".
+ViktorKamera Thanks
no podeeeee, mira como fuma eso!!!!!!
Tire treads are backwards.
....... 1:10
superkool
Hmmm not really digging the sound, I think a good can would make it sound a lot better. Other than that solid bike tho. Just wondering why the engine doesn't even seem to be turning over when he's kicking it?
It's scared to death of him squashing the fuckn bike & so refuses to start ( self preservation ) lol
It's a 600cc single cylinder. To facilitate kick starting, the XR has a system to open the exhaust valves a bit before full compression that's hooked up to the kickstarter, allowing you to turn the engine over with your foot, but it can make for tricky starting sometimes.
Pobre moto, ha de tener cara de "Please kill me" 😖
That things clapped out, look at how easy hes kicking a 600 over ffs.
There’s a decompression valve
Useless, too much messing about trying to start it..
600cc ou 350cc?
MEU JOGA FORA KKKKKKKKKKKKKKKK
buenas quiero saber que tanque de combustible utilizaron en esa moto por favor me podrian ayudar con ese dato
cb 900
the exhaust is shaking is not
From what tank?
I think CB750/900, 1980.....ish
Бля,заводится хорошо,но сцукко долго!😂
Suena como una cortadora de cesped eso.
Te invito a mirar mi Zane50 modificada en mi canal
Looks beautiful, sounds like crap.
starts like Crap !, my XR 600r drinks oil more than gas. and always start on first kick even after sitting 6 months. and yes that sound is shit. sounds like a 250 with that sharp sound.
Kicking but too cool to wear boots? He'll learn. Athletic shoes aren't for riding either unless you don't really like having feet. They also melt when they touch hot exhaust.
1:24 jajaja flase q era un fiat 60 pero no, era un xr600
alguien me puede decir donde puedo conseguir un tanque igual al de esa moto porfavor ?
Very difficult to find info of this bike, I've looked everywhere I haven't been able to find anything. Can anyone help me out on the gas tank?
+Omar David Matar Guerrero
honda supedream gas tank
+Omar David Matar Guerrero I'm taking a total stab in the dark, but to me it looks a bit like a CB250N tank or along those lines
Thanks guys, ill start looking
Omar David Matar Guerrero Possibly a mid 80s cb750 tank?
Jolie xr !!mais cest pas comme sa qu on démarre un xr !!
n mmr una emergencia y ahi quede
Yea. Flood it some more 😂
Que evento fue ese ? Y en donde¿
Fue el: Armado fuera de fabrica de 2015. Se hizo en la costanera de Olivos.
+ViktorKamera se volverá a hacer 2016¿¿?
Se hizo la semana pasada. Igual este año hubo menos motos y demasiada gente. El año pasado fue lo opuesto.
viktor que tanque es el de esa moto
Belle bécane par contre j'aime pas le son de l'échappement.
la moto qedo terrible pero ponele un escape decente suena a lata
naaah..no ..caferacer with a one cylinder engine ...
te quedo hermosa. de que zona sos?
No es mía, la filme en el armado fuera de fabrica 2015.
1. Learn to start you bike. 2. Learn to edit film! Cool bike though
pero que carajo acabo de ver jajaja
Jolie mais ne semble pas fiable😄
Y pensar que Los japoneses estuvieron diseñando terrible moto durante años,devuelvan ese motor a donde tiene que ir dioss jaja
La verdad me duelen los ojos ... arruinar lo que es el sueño del pibe para algunos
Please put a muffler on it. Overly-loud bikes give us a bad name
What a beautiful small cc cafe bike made from a rescued older Honda. A great cafe' for someone that is 5'-5'6" maybe 8", certainly not that slothful out of shape man that took so many times to simply start that gem. If he was the rescuer of the Honda I applaud him for his crafmanship, but I must say that he not only embarrasses himself and his lineage but also the historical name of Honda by his slothful representation. I have built many custom, one off, show and commissioned builds and I would nor could imagine misrepresenting my artwork in such a demeaning manner. You sir, should be ashamed, if you are not, I am for you. Whether you deserve it or not is not the question, it must be said on behalf of custom bike builders worldwide.
bigbearbland
a cb200 or a cb350 is a small cc cafe bike. Any single cylinder bike over 400cc's is referred to as a "thumper" because of the large diameter of the single piston. This is not a small bike, it just looks that way next to that gargantuan Sloth-Bear trying to start it...
RAT CAFE! !!
La moto esta bien armada (dentro de los gustos de cada uno), pero jamas vi a un tipo tan inútil para arrancar una xr600. Pero lo mejor es que si no aprende, va a bajar de peso el gordo. O al menos la pierna derecha!
It's a HOnda, not a Harley, should be easier to start!
its way to high
Too many pies
Ese tambo no cabe hay bajenlo ala vergaa
no quiere saber nada esa 600, no quería ser café racer por eso
Pobre moto ya la aplastaron
small exhaust, fucked up.-
The bike suffer with so much weight
Skata na fas Oh yes.. I guess this must be one hell of an unhappy seatbench
lack of power
Lo unico bueno las cubiertas
pobre xr . lpm.. te compre el escape origuinal.. no se acelera al patear ,te puede dar una contra explocion y te rompe la pierna gordo
STO CICCIONE QUA SOPRA NON SE PÒ VEDÈ
Put the dirtbike stuff back on it. It was a cooler and more capable design before this build. Ruined a good off road bike.
Pra liga a moto vc ja vê que é uma merda kkkkkk
forks are too long.looks like a chopper.
che me avisan cuando la haya podido arrancar a esa moto!!!! cuanto demora en arrancarla por dios....aburridooo
pobre moto
Very nice fake Ohlins
more like a street fighter than cafe racer. Not diggin it. jeeze, start the damn bike, you're 1 minute into the song! the other cafe racers beat you back before the song ended
+Texas Slinger Its both bikes, this tipe of bike its called " Cafe Fighter".
Agreed, ust looks like a street-fighter. No offense though, I tried to turn my Ninja into a cafe racer as well and ended up with similar lines. Rough go getting started still and sounds like its running through a Mountain Dew can
+Ian L Ya it looks like he just cut off part of it. Definitely needs something better than that!
Texas Slinger Lol! Classic comment!
Que cosa más horrible! jajaja
that isn't a cafe racer at all its disgusting
Cafe racer is disgusting...
Está fundida y no la sabe hacer arrancar
stupid bike
cero compresión 😂😂😂
Emma Caro ja ja ja
Que manera de arruinar una moto👎
it's a cool cafe racee i want that bike so i can ride in the phillippines