Thanks for this wonderful Ideas as you well aware i have some issue in finish my concrete fence now just to think about it i can cast a homemade bricks
Interessting but takes a lot of time due the screwing process. I suggest you to screw just the oposite corners, place a hinge in one and a lock in the last one. Once the brick dries a bit you can take of the mold and make another one.
Instead of removing and installing, the top hole can be closed with a plank of wood, the hole is made from the side, and then the mold can be turned vertically. That's faster.
O formato é bom, porém se perde muito tempo pra desformar, por isso as formas de blocos são deslizantes, para acelerar o processo em grande escala, nesse caso, ela deveria fazer às laterais largas fechadas e fixas, fazer o bloco de comprido, deslizando a forma na vertical!
Felicitaciones 👏👏👏 excelente idea gracias por compartir amigo 👍. Trataré de copiar esas ranura con plástico de PVC para mis ladrillos de concreto liviano con isopor que en el vídeo de mi canal en el episodio #3 estoy enseñando como hacer esos ladrillos 300 unidad mínima por día con un solo molde.. .. saludos 🖐️😃 ,🇵🇾♻️
Well, I need 3000 pieces to make a little house he he he, but it is a very heavy block, you must make it lighter, it is very cumbersome to manufacture.
Boa tarde ! Minha dica 2 borrachas ou 2 elásticos, em cada lado da forma. Ao desenformar sai rápido. Mas ficou excelente a forma vou compartilhar e copiar, pra levantar.parede fechar lado vizinho. Obrigado
Felicitaciones ; Por tan importante ingenio que alavés sencillo e indispensable, Me gustaría que por favor me dijera la cantidad exacta de material para un determinado numero de bloque o adobes bloque no se como usted lo llame Gracias
Why even create the grooves why not just make a solid brick this is a stock up it doesn't even look like it does that. And then he stacks it on the flat side, I still like the idea I think it's me just real think about your design a tad bit more I think
Hola Óscar..tal vez lo hace así para hacer su tutorial nada más.. te invito a que veas mí video el el episodio #3 para tener una idea de rapidez en desmoldar BLOQUES🖐️♻️
If the mold has one side concave and other side convex, then the bricks can be like a tongue and groove so they can stack quickly. Oh... wait a minute. Just found your other videos doing something similar.
It is a best idea for those who have strong believe that a house can be built by ONE brick only.
Love your patience for screwing and unscrewing.
6:21 what about using hinges? will make it quicker to open.
Agreed. Hinges and a ratchet band clamp would make a single mold a lot faster.
exactly what I was thinking,
whats the ratio of sand and cement? how long does it take to gain strength, is it brittle,?
Thanks for this wonderful Ideas as you well aware i have some issue in finish my concrete fence now just to think about it i can cast a homemade bricks
Nice work, instead of wood screws use clamps & can produce more pieces
Parabens pela iniciativa. A simplicidade ajuda muito a comunidade. Se transpusessem a forma para chapa metalica poderia ser mais rapido. Gostei.
Well done, try using clips on the sides to secure it instead of the screws.
Está padre. Quizá podrías agregar bisagras en lugar de tornillos para agilizar
Asi pense yo
Interessting but takes a lot of time due the screwing process. I suggest you to screw just the oposite corners, place a hinge in one and a lock in the last one. Once the brick dries a bit you can take of the mold and make another one.
من الحديد افضل الجوانب.كلها مغلقه جانب واحد متحرك اسرع ويبقى زمن طويل
Instead of removing and installing, the top hole can be closed with a plank of wood, the hole is made from the side, and then the mold can be turned vertically. That's faster.
Agree with you thats how the bricks are made with hand in mass production
Kreatif sekali membuat cetakan bata model baru , semoga tuhan meberkati sukses❤️🙏🙏
Awesome idea very nice art work good.
Excelente esse formato lateral. Essas cavidades laterais deixara o reboco mais firme. Pura engenharia.
Cool but For a house of 100 m2
Type of breeze block
Standard (20x20x50): 1113
20×25 breeze block : 897
Good luck :)
As a civil engineer,I think the idea is dope,
O formato é bom, porém se perde muito tempo pra desformar, por isso as formas de blocos são deslizantes, para acelerar o processo em grande escala, nesse caso, ela deveria fazer às laterais largas fechadas e fixas, fazer o bloco de comprido, deslizando a forma na vertical!
Have You built anyhthing with these blocks? Have You test their resistance to presure?
Una pregunta ?no se moja y lleva tierra en vez de arena ?.
Incrível parabens pelo trabalho. Grande abraço Brasil
How are they self-casting?
Parabéns pela criatividade, muito útil em qualquer construção ,antes que eu esqueça LINDOS
The void in the mold must be lover and lover and you must put in the corners details and leave one corner of the lace to be easier to get out the mold
круто! А какой разделитель использовали?
От фляги застёжка должна подойти. Быстрее, чем отвёрткой крутить.
Спасибо, всех благ!
OMG he's definitely not going to build a house in three years time .is a kindergarten project.
It's nice to see a woman dealing with cement. lol, I noticed the painted toes. You go!
Kool...now about 10,000 more.
están muy prácticos, gracias !!!
Jalapeno?
بأمكانك تعمل أغلاق يدوي مختصر تركيب ألألواح وفتحها . شكل ألبلكة أو ألطوب جميل طريقة ألأغلاق والفتح خطأ .
💐very good 🌹👍🌷
Mudah simpel dan hasilnya pun bagus sekali
What's the ratio
O ploblema e ter q desmontar o molde pra tirar o tijolo deveria faser um molde mais pratico.
Muy ingenioso este señor.. pero tu idea de que sea más práctico te invito a que veas mí video el episodio #3 🖐️ saludo ♻️
What about making one edge male and the other female?
Sangat bermanfaat patut di coba 👍❤️
Without any compression???
🧐muito trabalhoso, mas bem engenhoso.
Top demais parabéns 👏
Люди уже в космос летают. А этот до сих пор палкой копалкой работает.
Felicitaciones 👏👏👏 excelente idea gracias por compartir amigo 👍. Trataré de copiar esas ranura con plástico de PVC para mis ladrillos de concreto liviano con isopor que en el vídeo de mi canal en el episodio #3 estoy enseñando como hacer esos ladrillos 300 unidad mínima por día con un solo molde.. .. saludos 🖐️😃 ,🇵🇾♻️
CUANDO TERMINES
PARA UNA BARDA
TUS NIETOS
YA TENDRAN BARBAS!
Hi. Is it sharp sand with gravels mixed or only sharp sand + cement alone
Sand + cement
Thank sir. I assume it's sharp sand? Or maybe plaster sand as you did not specify. I just wanna try this
Well, I need 3000 pieces to make a little house he he he, but it is a very heavy block, you must make it lighter, it is very cumbersome to manufacture.
Золотой кирпич. Слишком трудоёмкое изготовление.
Do you happen to sell these homemade molds??
And if so how much would you charge for 3 or 4 of them ?
great ideas
There's a special place in my heart for videos where a chili pepper just randomly shows up. 🤣
Caraca, se colocasse dobradiças no lugar de parafusos ficaria mais funcional.
Ditch the screws and replace them with hinges and latches
Mantapp boleh di coba buat cetakannya
Using hinges and lock at the sides of the mold will probably speed up the work. Great idea for diy job.
Mungkin lebih cepat kalau di pasang engsel ,lebih praktis bongkar pasangnya....
*Good idea and nice lookBut the reality remains and the health of the woman in her kitchen cooks the food and the man is on the battlefield*
Consejo...yo le pondría trabas en el frente del molde así es mas fácil sacar el mismo... espero que sirva mi comentario ...gracias
Muy bueno pero modernizalo para que sea más rapido
Buena la idea amigo, pero si ocupo 500 tendria que empezar a construirlos 2 años antes.
eres corto de imaginación
Boa tarde !
Minha dica 2 borrachas ou 2 elásticos, em cada lado da forma. Ao desenformar sai rápido.
Mas ficou excelente a forma vou compartilhar e copiar, pra levantar.parede fechar lado vizinho.
Obrigado
Боже, как всё просто =)))
Shouldn't the PVC in the form be offset top from bottom so that the bricks interlock when stacked ? _n_n_ on the bottom, -^-^- on the top.
The last comment was for you Steve, the man your watching is credit to his gender.
Yes
Nice idia
Good info thank you
What are you using @ 4:15 to put on the board? I am assuming its for the concrete mixture sticking prevention
Just use cooking oil
Felicitaciones ; Por tan importante ingenio que alavés sencillo e indispensable,
Me gustaría que por favor me dijera la cantidad exacta de material para un determinado numero de bloque
o adobes bloque no se como usted lo llame
Gracias
Why even create the grooves why not just make a solid brick this is a stock up it doesn't even look like it does that. And then he stacks it on the flat side, I still like the idea I think it's me just real think about your design a tad bit more I think
Compra.uma parafuzadeira
Muy buena idea solo que deberia tener muchos moldea para hacer de una sola vez .pero Si es para levantar paredes.. me parece mucho peso...
Hola Óscar..tal vez lo hace así para hacer su tutorial nada más.. te invito a que veas mí video el el episodio #3 para tener una idea de rapidez en desmoldar BLOQUES🖐️♻️
Nice. But why not consider making a continuous longer mould? Fifty or even a hundred metres? Do one fill, let dry, and use a cut off saw?
Rather divide it into multiple blocks to avoid using a cutoff saw
Es buena la idea pero tiene que ser más práctico para poder sacar el Blok
Como faz a massa?
No explanation on what you used to brush inside, what you did for the mix? Also, buy a drill lol.
A unique idea. It is far better than the idea of Sir Issac Newton and Albert Einstein 🤔
عمل القالب جيدولكن طريقة نزعه غيرموفقه لوجعلتها نرماده ابواب مفتوحه افضل بالنزع وشكرا
It better to use lockers that are easily opened
Wow beautiful
If the mold has one side concave and other side convex, then the bricks can be like a tongue and groove so they can stack quickly.
Oh... wait a minute. Just found your other videos doing something similar.
sangat jenius,salam sukses selalu
А защёлки поставить не догадались?)))
Yedpat aahe ka pratyek veles kholat basnar ka...
Vai passa 100 anos pra fazer 1000 blocos
С производительностью - беда ! Не то , что на дом , на собачью будку год кирпичи надо делать! Но девушке - респект за усердие))))
Every time screw unscrew not advisable. Time consuming. squre frame can insert to 4 side and remove easily.
That took way to long due to the screwing, use hinges or clamps would of been faster
Window model clamps will save the time set the brick out.
nice idea
Believe in yourself, our determination is sotNice tutorialng that never lets us down
On one of the faces it would be necessary to put a hinge on one side and a quick fastener on the other.
Then a while after the latch was invented.
😅😅😅
How many days i expend for 1 000 to much time
Waw keren gak perlu beli konblok... buat sendiri bisa untuk halaman rumah dan dinding... sukses k k .
Bạn chia sẻ cách làm gạch hây lắm bạn ơi, cảm ơn bạn đã chia sẻ video thật hữu ích này, chúc sức khỏe bạn nhé, giao lưu và kết nối ủng hộ kênh nha bạn nhé
Without giving side screw you can press by hard block from side.to save time
Buena la idéa, pero cuanto me llevaría hacer diez blocks, debería ser mas practico el molde
COANDO HAGAS MIL
TUS NIETOS
YA SERAN
ABUELOS
vai gastar 30 anos pra fazer um mieiro kkkk
ficou bom mas dá para melhorar que assim demora demais
Super
Please use hinges out side th 3 corner and one side clips locked it's better
It's takes long time for unsweetened every time
build your own dog house in only 150 years...
If I put one half pipe on one side and two in the other the bricks can be interlocked. 🤔
Muito bom