Hi, how can I identify one type of access card? The voltage changes from 38V to 30V during HF tuning, but the Proxmark3 didn't find anything when I tried the commands 'auto' or 'hf search'. What i do wrong?
It might be that the card is a type that the proxmark3 is not able to automatically identify. You may want to join the Iceman discord server to see if you can submit some scan detail, or join the dngr.us/forum and post there. Also, confirm you are using the Iceman branch of firmware and client.
That intermediate board that you say does nothing, does it have any electrical connection? Even a ground plane? I was thinking it had ground to protect the active circuitry below from having induced signals from the LF antenna above. Or not... thanks for the informative vid!
It does play an insulative role, but not for the electronics, more for the LF antenna itself. Removing it does detune the LF antenna a little, but there's no practical effect on performance.
I think I have an Rfid chip used for wireless harrassment and v2k ,brain mapping etc, I hear my thoughts being read out by my abuser over security cameras etc .
Contactless payment cards and Apple Pay use 13.56MHz. Some access cards are also 13.56MHz but some are 125kHz. Ultimately though, the frequency is only one aspect of the communication mechanisms in play. For more information about payment implants check out dngr.us/payments
Hi, I know this sounds like a lot. I am trying to modify a NTAG123 NFC tag to write the UID of the tag, change it to another specific number. So I need two tags with the same UID. Would it be possible with this Proxmark3 Magic ntag tool? Thanks a lot!
Hey sorry for the late reply.. you can't change the UID of 99% of all RFID and NFC chips.. they are designed to be static serial numbers that can't change. Only a very small number of a special type of chip can be reprogrammed with a new ID.
I was implanted with a rfid glass chip against my will in 2017 in a part of my body that cannot be accessed easily, I know nothing about the chip only that it is powered by body heat, my question is how far away from the chip does this reader have to be, for it to be readable??? since 2017 I have noticed a guy who keeps coming to places that I am he always has a laptop with him and it has a big square thing plugged in to it with 2 antenna on it, when I started noticing him I noticed he would always be sitting a good few seats away from me after about 30 or 40 minutes he usually is sitting at the table behind me with his laptop out I do get spooked an get up leave the shop or cafe walk about 50 yards then he leaves stright away, my main question is how can I access this chip that is in me? What do I need to do so?
I've been learning so much about the practical cloning and reading of the implants and chips in the last few days! Thanks Amal!
These videos areawesome! I love the forum, but short instructional videos like these are great.
Hi, how can I identify one type of access card? The voltage changes from 38V to 30V during HF tuning, but the Proxmark3 didn't find anything when I tried the commands 'auto' or 'hf search'. What i do wrong?
It might be that the card is a type that the proxmark3 is not able to automatically identify. You may want to join the Iceman discord server to see if you can submit some scan detail, or join the dngr.us/forum and post there. Also, confirm you are using the Iceman branch of firmware and client.
That intermediate board that you say does nothing, does it have any electrical connection? Even a ground plane? I was thinking it had ground to protect the active circuitry below from having induced signals from the LF antenna above. Or not... thanks for the informative vid!
It does play an insulative role, but not for the electronics, more for the LF antenna itself. Removing it does detune the LF antenna a little, but there's no practical effect on performance.
Hopefully watching your videos will enable me to use my PM3 Easy to read some cards and fobs, I've had no success so far (12 months)
I think I have an Rfid chip used for wireless harrassment and v2k ,brain mapping etc, I hear my thoughts being read out by my abuser over security cameras etc .
Great video, thank you!
Is a debit card frequency the same as an access card frequency?
Also what kind of implant/chip would I have to get in order to pay for stuff with?
Contactless payment cards and Apple Pay use 13.56MHz. Some access cards are also 13.56MHz but some are 125kHz. Ultimately though, the frequency is only one aspect of the communication mechanisms in play. For more information about payment implants check out dngr.us/payments
@@Dangerousthings you are awesome,dude! Thank you very much!
Hi, I know this sounds like a lot. I am trying to modify a NTAG123 NFC tag to write the UID of the tag, change it to another specific number. So I need two tags with the same UID. Would it be possible with this Proxmark3 Magic ntag tool? Thanks a lot!
Hey sorry for the late reply.. you can't change the UID of 99% of all RFID and NFC chips.. they are designed to be static serial numbers that can't change. Only a very small number of a special type of chip can be reprogrammed with a new ID.
ThankYou.
Cool
I was implanted with a rfid glass chip against my will in 2017 in a part of my body that cannot be accessed easily, I know nothing about the chip only that it is powered by body heat, my question is how far away from the chip does this reader have to be, for it to be readable??? since 2017 I have noticed a guy who keeps coming to places that I am he always has a laptop with him and it has a big square thing plugged in to it with 2 antenna on it, when I started noticing him I noticed he would always be sitting a good few seats away from me after about 30 or 40 minutes he usually is sitting at the table behind me with his laptop out I do get spooked an get up leave the shop or cafe walk about 50 yards then he leaves stright away, my main question is how can I access this chip that is in me? What do I need to do so?
Cut it out with a dull knife
Are you alright dude