That's not a void. After there was problems with headsets coming loose on these bikes they started gluing in an inset for the headset top cap to screw in to, instead of using a normal compression plug. So the gap you see is between that inset and the fork, not a void in the carbon layup of the fork steerer itself.
I really enjoy watching these builds. Always learn something. Which brings up a question: what protects the rear brake line that goes through the bottom bracket from being rubbed by the crank shaft? Also what if a person wants to change the handle bar height after the fork steering tube has been cut?
Pues que deberías de cambiar los latiguillos del freno , mas que nada por que quizas no tengas margen , y lo del cable del pedalier , una vez montado la caja de pedalier queda por debajo y no roza , ya que el eje de pedalier va dentro de la caja . 🎉
@@schuey999 You said in an earlier comment that you didn't agree with such expensive bikes & that surely a 5yr old one at a much less cost is your preferred. What's changed your mind?
@@tman5634 Bike shortage and inflated prices of used bikes. The 2016 bike I really wanted was going to cost over $6k used with rim brakes, and I couldn't be sure about the integrity of the frame. I was also going to have to hunt down used ENVE wheels, and wasn't sure how long that would take. At that point it just made sense to pay a little more and get a new bike. If things didn't happen the way they did and I could have found the bike I wanted for $3500, I would have surely bought the used bike. And my Ostro weights 16.3 lbs without pedals.
I noticed u only used one 3mm spacer, on the drive side, installing the crank. Is that correct? Sorry for my question…its because im gaving to many chain drops moving from the smal ring to the big one….
Hey, what headset spacers are you using please? I've just bought the Black Inc bars and I'm looking for something that sits flush with the stem Cheers!
I always thought those would be lighter. Guess the aero aspect adds some weight to it 🤔🤔. My 2010 CAAD8 is 7.7kg fully dressed and still plenty of room for improvements.
Dam there is a lot of voids visseble in the steerer tube after the cut. I would not feel very safe in a full speed descent knowing my steerer tube has voids this big
there's a black sword there, routing the brake cables. when you wear it. rests on the shaft tube. 3mm gap in total. and of course when you put the handlebar on it goes up almost 0.5mm. so don't worry
The void is not in the steerer tube, it's between the steerer tube and the compression plug that is bonded into the steerer in this case. On whatever you're riding it's likely an expanding plug, that may or may not reach low enough to support your steerer tube in the stem/headset area, but everyone seems to be fine with that. I guess some people just watch Hambini for the cheap shots, but now they're all "experts" too.
This bike was really easy to assemble th-cam.com/users/postUgkxMesz3KOGEmwmvyKQfLfrRSUXLFzfVHZA and required very few adjustments out of the box. The wheels did not require any truing/adjustments. The frame had some small scratches, but nothing major.I did replace the seat though - the seat it came with was very uncomfortable. The tires need to be re-inflated every 4-5 days, but this appears to be quite common for the narrow 700x25 tires.Overall, in my opinion, this bike looks and rides like a much more expensive bike.
Hi guys, in the force rear calliper was there a red compression fitting or a silver one ? I was trying to replace my brake hose this week and I have a red stealthamajig at the lever end and a silver one at the calliper end. I can’t find the silver ones anywhere online 😆. Any info on this , can I use a red stealthamajig on the calliper end too?
may I ask what is the size for the bike? also, I've been seeing several ostro build recently, why is this one quit heavy? Do you think I can make the bike weight within 7kg with red build?
According to factor site, "It can easily be built up to below the UCI 6.8kg weight limit" . but then real world weight is 7.7kg... at this prices, i think i´m keeping my 6.7kg supersix of 2017
![เปิดบ้าน โคตรสวย ป๋องกพล รู้จักตั้งนาน เพิ่งรู้ว่ารวย!!! l [Nickynachat]](http://i.ytimg.com/vi/tmgCF_2HfYI/mqdefault.jpg)
3:52 That void in the steerer😀
For a component like the fork this is really bad and dangerous. I would not spend my money on a 4k frame knowing the steerer has voids.
@@thijsvandenbroek5333"premium racing bikes" sounds like a scam nowadays
That's not a void. After there was problems with headsets coming loose on these bikes they started gluing in an inset for the headset top cap to screw in to, instead of using a normal compression plug. So the gap you see is between that inset and the fork, not a void in the carbon layup of the fork steerer itself.
Ich könnte Stundenlang einfach nur zu schauen.. Top.....
Hep yabancıları mı izleyip ne güzel yapıyorlar diyeceğiz.Eline sağlık kral.
16:03 perfect
7.7 kg is unbelievable. Love your videos guys. Congrats 🎉
Plus 2 filled water bottles 1500g+garmin120+pedals 250, total race weight 9570+ LOL
Lol, my Cannondale Systemsix Hi Mod Dura Ace di2 2020 have a 7.8 kg without pedals...
@@kielond.3638 So it´s heavier, whats your point?
I can brag aswell, my Canyon Ultimate is 6,9kg with deep wheels and pedals
@@ArteUltra1195 wtf? You ok? You normal? I have 64 mm deep wheels in my Systemsix. What You want for me?
@@kielond.3638 you‘re not the brightest candle on the cake are you?
Woow!! Factor !! Nice vídeo Hayta!! saludos desde México!!
Just picked up my Factor Ostro Vam in Racing Green with SRAM Red AXS! Two more weeks until arrival!🙌🏾
14:39 don't touch the rotors with gloves 😁😁😁😁
Nice to see a real pro at work :-) NICE bike!!
Şahane bir makina daha ortaya çıktı. Ellerine sağlık Ömer ustam.
I really enjoy watching these builds. Always learn something.
Which brings up a question: what protects the rear brake line that goes through the bottom bracket from being rubbed by the crank shaft?
Also what if a person wants to change the handle bar height after the fork steering tube has been cut?
Pues que deberías de cambiar los latiguillos del freno , mas que nada por que quizas no tengas margen , y lo del cable del pedalier , una vez montado la caja de pedalier queda por debajo y no roza , ya que el eje de pedalier va dentro de la caja . 🎉
Love your bar tape technique!
Bring your bike to here 😉
@@Haytabike too late! New built completed last weekend. 😂
Perfect building. 👍🚴♂️🏆
Senza pedali è tanto peso vuol dire che in ordine di marcia supera gli 8 kg abbondantemente, comunque bellissima bicicletta .
Are those voids on the steer tube??
Nicely done, peace from New Mexico
Great video, thank you. I just ordered the same bike in 58 with Sram Red. I hope it's not 17lbs.
Maybe 7.4 kg ~ Sram Red Axs
Black Inc Team Edition Wheelset
@@Haytabike That would work! Thanks. Sure wish you could do my build.
@@schuey999
You said in an earlier comment that you didn't agree with such expensive bikes & that surely a 5yr old one at a much less cost is your preferred.
What's changed your mind?
@@tman5634 Bike shortage and inflated prices of used bikes. The 2016 bike I really wanted was going to cost over $6k used with rim brakes, and I couldn't be sure about the integrity of the frame. I was also going to have to hunt down used ENVE wheels, and wasn't sure how long that would take. At that point it just made sense to pay a little more and get a new bike. If things didn't happen the way they did and I could have found the bike I wanted for $3500, I would have surely bought the used bike. And my Ostro weights 16.3 lbs without pedals.
Amazing bike 👌🏼 I would have chosen the sixty wheels though, 45 for the O2!
efsane bir paylaşım daha ....
mechanical groupset are compatibles with this headset and tube fork shape?
I noticed u only used one 3mm spacer, on the drive side, installing the crank. Is that correct? Sorry for my question…its because im gaving to many chain drops moving from the smal ring to the big one….
7,7kg.
8,0 kg with pedals and bottle cages.
1,2kg up than the UCI limit
+100kg human weight - 40 up than UCI cyclists. Bike weight is not important
@@danielquinones1521 All is important
Bella bella 😍👌🏻
Ok una belleza saludos desde Bogotá bendiciones
Dürüm build yaaa
Hello, the hubs on those Black INC 45s don't look correct?
i wish someday i have this Carbon Bikes
Eso es lo que pesa mi MEGAMO y sin ruedas de carbono 😎
Hey, what headset spacers are you using please? I've just bought the Black Inc bars and I'm looking for something that sits flush with the stem
Cheers!
OMG! Just look at that VOID on fork at 3:50!!
❤ dream bike ❤
Hola de qué tamaño se usa el espaciador para la biela del plato ?? Gracias
What size is that frame, tall rider! Love the build!
El sillón quedo desnivelado.
I always thought those would be lighter. Guess the aero aspect adds some weight to it 🤔🤔. My 2010 CAAD8 is 7.7kg fully dressed and still plenty of room for improvements.
Disc groupsets are quite heavy and SRAM Red is only 300gr lighter
Dam there is a lot of voids visseble in the steerer tube after the cut. I would not feel very safe in a full speed descent knowing my steerer tube has voids this big
there's a black sword there, routing the brake cables. when you wear it. rests on the shaft tube. 3mm gap in total. and of course when you put the handlebar on it goes up almost 0.5mm. so don't worry
@@Haytabike for that kind of money that is a joke
That fork should have been sent back. Those are massive voids
The void is not in the steerer tube, it's between the steerer tube and the compression plug that is bonded into the steerer in this case. On whatever you're riding it's likely an expanding plug, that may or may not reach low enough to support your steerer tube in the stem/headset area, but everyone seems to be fine with that. I guess some people just watch Hambini for the cheap shots, but now they're all "experts" too.
@@HaytabikeI’d want my bike shop to be worrying about voids that big in a fork.
Cool Video! Size? Thanks
same. weight of my Cannondale caad 10 dura ace 9000 gs and ksyruim sl wheel set
Güzel bir iş daha
Fantastico!!!!!❤
와우... 예술자체네~
This bike was really easy to assemble th-cam.com/users/postUgkxMesz3KOGEmwmvyKQfLfrRSUXLFzfVHZA and required very few adjustments out of the box. The wheels did not require any truing/adjustments. The frame had some small scratches, but nothing major.I did replace the seat though - the seat it came with was very uncomfortable. The tires need to be re-inflated every 4-5 days, but this appears to be quite common for the narrow 700x25 tires.Overall, in my opinion, this bike looks and rides like a much more expensive bike.
Hi guys, in the force rear calliper was there a red compression fitting or a silver one ?
I was trying to replace my brake hose this week and I have a red stealthamajig at the lever end and a silver one at the calliper end. I can’t find the silver ones anywhere online 😆.
Any info on this , can I use a red stealthamajig on the calliper end too?
Hello there. You can use it for the silver color caliper. If it is not in the cable, use red, it will not be a problem. I never tried it :)
May I know what bartape is that
What is that saddle?
handlebar without electrical tape 👍respect
It's from my country, Taiwan.
It does the job
this bike deserves dura ace
What size is the bike
wowwow dream bike
Muy bonita máquina parece que cuesta 1000000 €
Nice and beauty
58 cm frame 7.7 perfect
may I ask what is the size for the bike? also, I've been seeing several ostro build recently, why is this one quit heavy? Do you think I can make the bike weight within 7kg with red build?
58 Size -
Tires and Wheelset and Force Axs normal 👌
if you're trully concerned with weight i'd advise you go with shimanom as ultegra and dura-ace are ~200g lighter than the equivalent Sram groupset
It took on the colour of the Vam O2 from last year....
Aqui no Brasil,uma bike dessa custa mais de 100 mil reais.
Quá đẹp
Bella
😀😃😄😀🤗
how much this bike
Magkano, ang isang bike na tulad nyan
7.7 kg is quite heavy for one of those bikes with sram axs
Aero Frameset and Force Axs +
56 58. ?
Why always SRAM
we will make shimano in the next video.
Ohh okay 👍😸
Because is Sram
Do you know I have never seen a factor made up in Campagnolo what a shame
Stock over 😔
7.7kg? A simple vanrysel of 2400€ with 2 changues is lighter
My Van Rysel weight 6.8 without pedals on size L and 3.000€
un escalador con una bici de casi 8k no está bien
Crazy how a 17 pound bike is the new norm. Ugh.
According to factor site, "It can easily be built up to below the UCI 6.8kg weight limit" . but then real world weight is 7.7kg... at this prices, i think i´m keeping my 6.7kg supersix of 2017
Too heavy......Where's the Rim brake version, proper performance road bike...disk for dirt Rim for road.
Si in un altra vita scritta da studente seno nn va bene perché l ignorante nn deve esistere tutti Professori in lettere