imo, - Front panel is FineMesh so it can filter dust - you can put 2 fans on PSU cover too, since bottom case have full-size dust filter heck, this case is hidden gem Much more better than many branded case
thanks for the quick review! Very informative! I was wondering if you think it's possible to mount a 240mm radiator in front, together with 2 x 120mm fans behind in, so the radiator has a push-pull fan configuration. My GPU is not super long. Should not intrude into the space occupied by the radiator.
Finally! Dumating na talaga ang case na to. I've been waiting for someone to review this case since it looks cool based from the mesh design on the front. Now all I need is money to buy this haha. Once again sir marvin, great job on reviewing the products with more in depth reviews and even more great editing and b rolls
How much space for an AIO cooler in the top? Im wondering if the thick arctic liquid freezer 2 240mm would fit in the top, without hitting the motherboard
i bought the non rgb version and for whoever is wondering, all the fans connect to one little pcb, then you plug that into your power supply. the fans are pretty quiet and when you have headphones on you can’t hear it
I was gonna pick dlm21 mesh for my pc but i think im gonna go with this one.. It has free argb fans and also no big logo. Also cause it looks a little better, i prefer the glass covering the whole side
Nice review! quick question, if you put an aio radiator on top and the fans on push position, is it better to keep the dust filter on or just take it off for better air flow? Thanks!
Im using fractal design define mini c right now, and im very satisfy with the build quality and features. Excellent and amazing. i also build with tecware nexus m for 2 times already, compare the build quality and features are really different. but its understable because of the price. tecware case is good for someone looking for budget build, build quality standard, Very tight cable management, lightweight. I will not recommend tecware case for high end pc users. I will prefer fractal design meshify mini c
have you tried to install a triple fans GPU? Does it fitted to the case? i am wondering about the actual clearance for GPU mounting. Does it require to remove 1 front fan to install triple fan GPU's?
definitely looks like a fractal design meshify matx. pero kaka release lng rin ng tecware void M which actually looks good and has rubber grommets. this probably has better thermals than the void m but im worried about dust and if maka hold up ba front mesh. kudos for tecware though for providing budget cases.
thanks for the review. really helped me a lot. some youtuber doesn't really put attention to the back panel section especially the clearance for cable routing and management. thanks man and thumbs up for this amazing video.
So this looks a lot like a Fractal but with more free fans, haha. Nice. The PSU length accommodation is fine but will it be able to house 170mm WIDTH power supplies? Asking so I don't waste money and time picking this up only to find it won't work. Thanks for the vid!
From maximum airflow point of view, I will rank Forge M (full front mesh), then Nexus M (solid front, airflow turning 90 deg once to enter case), then Cougar (solid front, airflow turning 90 twice to enter case)
small update : if you do remove your front i/o and only leave the power button, you can mount a 360mm radiator in the front, however, then you can only mount a 30-31cm GPU, not a 34cm one
Is there a way na tanggalin ung mismong front mesh from the front panel frame? Balak ko bumili tas repaint into white since walang available na white variant nito(as of yet).
Can you review a new mech keyboard i saw on lazada? its called the Gigaware K880 and if its a legit mechanical keyboard said as i found it. It has no buyers yet so i'd really appreciate if you'd like to confirm if its a legitimate product or not. its a cheap mechanical keyboard for only 849 pesos which is cheap just like the K28.
hmm I did mentioned that if you remove the two screws underneath, the drive cage will also be detached. so imagine removing it like I did on the video with the case lying sideways, the drive cage will drop, unless you remove the screws from the bottom while the case is upside. which will require you to put the case like at the edge of the table or something like that.
@@TechBroll i think the holes in the filter are big enough for the thumb screws not to be removed anymore. Otherwise, you can always make it bigger using scissors.
![[UNCUT]“ฅนตื่นธรรม”ปะทะ“หมอปลา-ปู่มหามุนี-อั๋นโอกิ”สะเทือนกระทรวงเวทมนตร์ Iคนดังนั่งเคลียร์I10 ตค.67](http://i.ytimg.com/vi/peMD_SAkwNc/mqdefault.jpg)
Thank you for watching, you can get this from the link below: 🛒 BUY IT AT LAZADA 👉 bit.ly/3f6oXpE
Wala na stock ):
imo,
- Front panel is FineMesh so it can filter dust
- you can put 2 fans on PSU cover too, since bottom case have full-size dust filter
heck, this case is hidden gem
Much more better than many branded case
How do you not have 50k subs? c'mon guys. His channel is so underrated. did you see those beautiful brolls? reminds me so much of hardwarecanucks
That was inspired :)
thanks for the quick review! Very informative! I was wondering if you think it's possible to mount a 240mm radiator in front, together with 2 x 120mm fans behind in, so the radiator has a push-pull fan configuration. My GPU is not super long. Should not intrude into the space occupied by the radiator.
Finally! Dumating na talaga ang case na to. I've been waiting for someone to review this case since it looks cool based from the mesh design on the front. Now all I need is money to buy this haha.
Once again sir marvin, great job on reviewing the products with more in depth reviews and even more great editing and b rolls
How much space for an AIO cooler in the top? Im wondering if the thick arctic liquid freezer 2 240mm would fit in the top, without hitting the motherboard
i bought the non rgb version and for whoever is wondering, all the fans connect to one little pcb, then you plug that into your power supply. the fans are pretty quiet and when you have headphones on you can’t hear it
Are u able to control it in the bios
is it possible to mount a 360 radiator in front? i.e ID Cooling Auraflow X 360?
hye is this the best budget airflow case? looking for one
How is the paintjob? Is it fine or rough like old rakk cases? (My rakk case had ugly rough paint which rusted after just 3 months)
any answers bro did u buy them?
This or the dlm21 mesh because both are similar? Which is better overall esp which has more easier to remove front mesh panel?
I was gonna pick dlm21 mesh for my pc but i think im gonna go with this one.. It has free argb fans and also no big logo. Also cause it looks a little better, i prefer the glass covering the whole side
Nice review! quick question, if you put an aio radiator on top and the fans on push position, is it better to keep the dust filter on or just take it off for better air flow? Thanks!
you can really say "Bang for the Buck" with this case! i love mine!
does it come with a fan hub?
@@sergsergesrgergseg yes it does have fan and rgb hub!
@@lonrea2886 what about the non rgb version? does that come with a fan hub?
@@sergsergesrgergseg that i dont know cause i bought the rgb one
xcuse me,can tu tell me about your CPU and GPU temperature..?
Gaano kakapal tempered glass niya bro? 4mm? or 3mm lang din like DLM21 Mesh? TIA
Im using fractal design define mini c right now, and im very satisfy with the build quality and features. Excellent and amazing.
i also build with tecware nexus m for 2 times already, compare the build quality and features are really different.
but its understable because of the price.
tecware case is good for someone looking for budget build, build quality standard, Very tight cable management, lightweight.
I will not recommend tecware case for high end pc users.
I will prefer fractal design meshify mini c
have you tried to install a triple fans GPU? Does it fitted to the case? i am wondering about the actual clearance for GPU mounting. Does it require to remove 1 front fan to install triple fan GPU's?
definitely looks like a fractal design meshify matx. pero kaka release lng rin ng tecware void M which actually looks good and has rubber grommets. this probably has better thermals than the void m but im worried about dust and if maka hold up ba front mesh. kudos for tecware though for providing budget cases.
Your review is really helpful. I like how you point out and measure the dimension and its features. Thank you.
Hi does it support 140mm fans for front intake?
Salamat!
Is the back cable management space deeper than the Nexus M?
Can the pcie slot be removed without being cutout? I'm planning to build a gaming/workstation pc using this case and might do a vertical gpu.
I got the very same one. It looks badass without rgb 👌👌👌
im using him big brother... TECWARE FORGE with 200mm fans... its a CM h500 substitute
What if your motherboard doesn’t support 5v 3 pin rgb adapter?Is there any way to power the rgb for the fans?
Can we install a 280mm radiator in front? Thank you
What rgb fans can be synced with this case? using asus prime b450m-a
im trying to build using this case + 224 id cooling too.. did you managed to make the video?
What are the real dimensions of the case? The box and voice at 0:50 says L340xW205xH412 while the specs at 1:27 says it's L400xW200xH425.
thanks for the review. really helped me a lot. some youtuber doesn't really put attention to the back panel section especially the clearance for cable routing and management. thanks man and thumbs up for this amazing video.
Dude, good review, I hope you get more subs and more review content to come!
kasya po kaya yung rtx 40 series dito ? specifically ASUS TUF Gaming GeForce RTX™ 4070 12GB GDDR6X OC ?
Bro ask ko lang hindi ba compatible ang ibang brand ng fans dito dahil sa hub niya? Balak ko mag add kasi nf two fans sa top. Salamat.
Is the front mesh made of steel/metal or plastic?
Pano maikakabit yung screw nito sir? sa likod? di ba mahirap sa bandang ibaba?
Can you recommend me matx casing with similar price that include front dust filter
DIY it's cheap. Get dust filter and magnetic tape
dust filter is very cheap
Vega M from Tecware
Aerocool Aero One Mini
Can We put 3070ti here with 3fan? I mean will it fit
Good day sir. Kasya kaya dito yung aorus master rtx 3070?
sir compatible ba yung forge m argb sa motheboard na gigabyte a320m s2h v2? maiiba-iba ko rin ba ang kulahy nun??
Tanong lang... kasya ba dito ang mga full size gpu like rtx strix with 3x fan?
Top notch ang shots, editing at yung pagkaka explain ng bawat parts ng case na yan ah. Galing!
Sir marvs, pwede ba 140mm fan sa front?!
Hello. Ask ko lng po kung ggana ung argb fans sa b450 aorus m motherboard? Newbie lng po 😅
where do you plug the fans hub?
So this looks a lot like a Fractal but with more free fans, haha. Nice. The PSU length accommodation is fine but will it be able to house 170mm WIDTH power supplies? Asking so I don't waste money and time picking this up only to find it won't work.
Thanks for the vid!
Forge M vs Nexus M or Cougar MG-120?
From maximum airflow point of view, I will rank Forge M (full front mesh), then Nexus M (solid front, airflow turning 90 deg once to enter case), then Cougar (solid front, airflow turning 90 twice to enter case)
can i put there a a320m anda a rx5500xt?
is noctua nh d15 can fit in this case?
You really make good videos in your channel, keep it up Sir! Sana mas dumami pa subscribers.
I wanna buy the normal atx variant but its not available in my country yet :/
Kasya ba yung id cooling se224 argb v2 na air cpu cooler dito
small update : if you do remove your front i/o and only leave the power button, you can mount a 360mm radiator in the front, however, then you can only mount a 30-31cm GPU, not a 34cm one
Not even 32cm ?
@@ayie393 you can try,but it'd be an hard fit
Is there a way na tanggalin ung mismong front mesh from the front panel frame? Balak ko bumili tas repaint into white since walang available na white variant nito(as of yet).
may release daw this july hehehe
Reattachable ba yung pcie slot cover
Auto watch even though i have no plans changing my case. Excellent review as always!
Hi Sir, kasama ba yung mounting screws para sa Mother board? Salamat! Lupit ng quality ng Vids nyu boss!
sir please create a build for this so that we can know the thermals.
Superb overview mate, many thanks from the UK :)
Ano yung mga case wires? Bakit parang may kasamang kakaiba?
You actually don’t have to take the the screws off the bottom to get the mesh grill out.
Gracias a ti pude remover el panel frontal, no sabía cómo hacerlo, y tenía miedo de romperlo, muchas gracias xdd
Not a huge fan of case with psu shroud that exposes psu, exposing psu loses the purpose of hiding it imo. But it's pretty good price :)
hi sir kasya ba msi mpg b550 gaming plus dito sa case?
How is the build quality? is it solid or flimsy?
Why no rubber grommets Tecware?!? Why???
Nice case BTW. Nice review sir. Aprreciate the work. Keep it up!
pwede pong palitan yung 3 fans sa harap po diba?
Man what great looking mATX case, if only it was available in the Uk
It’s available at scan if you’re still looking for one.. :)
Di naalis yung tempered glass side panel?
Can you review a new mech keyboard i saw on lazada? its called the Gigaware K880 and if its a legit mechanical keyboard said as i found it. It has no buyers yet so i'd really appreciate if you'd like to confirm if its a legitimate product or not.
its a cheap mechanical keyboard for only 849 pesos which is cheap just like the K28.
Hi! Can you install an AIO 240 mm in the front panel? Thanks!
molex po ba ang built in fans nito?
Kasya kaya ung Corsair cx650m dito?
Very detailed video, Subscribed and liked thank you :)
This or tecware alpha tg?
Are the fans loud or quiet?
Para sa inyo sir, yan or Tecware Alpha? Sayang Tecware Nexus M lang yung available nung bumili ako mukhang mas upgrade tong case.
Depende, kung ATX alpha, if mATX ito, parehong maganda na front mesh
Will it fit a triple fan gpu?
Can atx mobo fits in this?
Grabe yun case, ang ganda. May 4 na fans na kasama. Instant buy ito sa akin
Why do the specs say it has 7 pci expansion slots but the case only has 4
Pasok kaya ang noctua nh-dh15?
3:42 how do you mount the SSD to that area?
At front 4:33
How to install a custom front filter?
buti wala po syang vertical mount?
*this or Alpha M?*
Kasya ba d2 nhd15 at asus rog 2080 ti?
ganda ng forge m, lalo na siguro yung may arc spectrum na forge m
So removing two thumb screws within 5 seconds is now an inconvenience? Nice preview though.
hmm I did mentioned that if you remove the two screws underneath, the drive cage will also be detached. so imagine removing it like I did on the video with the case lying sideways, the drive cage will drop, unless you remove the screws from the bottom while the case is upside. which will require you to put the case like at the edge of the table or something like that.
@@TechBroll i think the holes in the filter are big enough for the thumb screws not to be removed anymore. Otherwise, you can always make it bigger using scissors.
Can the front fit 140mm fans?
Yes, up to 2.
Will this be available in the UK?
It’s available at scan if you’re still looking.. :)
@@CrimsonFukrr yes indeed
Does this have a white version po sir marvin? Btw great content as always!!
Can i install 2 x 3.5" Hdd?
Tecware Forge M or Montech Air 100? argb
Where to buy?
This case nice comes with 4 ARGB fan for 40 dollar and normal 4 fan for only 30 dollar .
Hit like before watching
Let's get in to it! 🔥🔥
Where to order sir
Panalo yung intro bro! 👏👏👏
What about the thermal?
tecware alpha m or this?
Lian li lancool 215 vs Tecware Forge M.