Fuel Filter Change V19A Jaguar XK8 / XKR (X100)
ฝัง
- เผยแพร่เมื่อ 6 ก.ย. 2024
- Video 19A Changing the fuel filter on a Jaguar Xk8.
Short video describing how I changed my fuel filter, the different types of filter, part numbers and different filter locations between early and later Xk8's.
Channel = / odrmodurol
Please 'like' if you like the video by pressing the thumbs up, this is much appreciated.
Part of a series of short videos on the experience with maintaining our owns
1996 Jaguar XK8 4.0 V8 Petrol, 2014 Diesel SUV and 2013 Nissan Leaf 80Kw Electric car.
This is not an official guide and is for general information and interest only.
We Current have lots of useful playlists on the O&DR Jaguar XK8 Channel for these cars.
You can also find us on:-
Facebook - / damian.richmond.1
Instagram - / oanddr_modurol
Thank you , that was a lot of help . Have a good day !
Forest, thank you for your feedback, very much appreciated, regards Damian
I have an 2012 XKRS and hope I can change mine with no issue. I just changed the filter in my XJR and was super easy. Thanks for this.
Brosec5, thanks for the comment and compliment. Glad you were easily able to change the fuel filter on your XKR. I don't have any idea about the X150 model. But good luck changing that too. You can find the service manual at Japrepair.com. jagrepair.com/images/AutoRepairPhotos/CarPDFFiles/2007XK/X150Service.pdf.
Hope that helps, Thanks Damian
Just finished installing the filter. Opening three clips going towards the engine and dropping the fuel line down is a must. The ends of the fuel line on my '99 XK are flared with O ring behind the flair. Make sure it is in good shape. I took the pressure off the fuel rail using the test port. If you follow the video you can't go wrong.
Robert, really good tips from your practical experience. Was a bit easier for me because I had already removed the middle boxes and fitted the Adamesh over axle pipes. Much appreciate the input, feedback and comments, regards Damian
When working on electrical , Disconnect the battery . Not a fuse.
Forest, very good advice, thank you for your input into the channel, regards Damian
Top !
Patrice, cheers, hope you found it useful, regards Damian
Excellent video. Thank you much. I have subscribed to you site
Robert, glad you found it useful. Thank you for the subscription and taking nth time to comment. Much appreciated regards Damian
I have a 1997 Xk8. This video helps alot! I have lots of questions. I need to change my camshaft position sensor, can you give me some pointers?
RC why do you need to change it? Maybe wrong bolt cam cover bolt? Have you watched this video? th-cam.com/video/bqx2QPz6lOE/w-d-xo.html. Haven’t needed to do the cam sensor yet, fingers crossed thanks Damian
@@ODRModurol I'm throwing the code, that says I have a bad camshaft position sensor (p0340). I can actually see the sensor, but it looks as if I may need to remove the fuel inlet to injectors just to make room.
RC, had a quick look at the manual look straight forward but tight for access and tricky. Good luck with changing the sensor, thanks Damian