Want to learn more about pew pew pew repair? mgs.edu Like me on Facebook / 22plinkster Follow me on Twitter / 22plinkster Follow me on Instagram @22plinkster
I have a T1x. It’s the most accurate .22 I own. I replaced the trigger spring with an aftermarket spring to put trigger pull at around two pounds. Head shots on limb rats are easy. Countless rounds through this rifle, zero malfunctions. Highly recommended!
Also called "tree mice", red squirrels are edible. I have a Ruger American Rimfire, Model 8351, 22 LR, stainless steel bolt-action, and it uses 10/22 magazines.
Interesting. We have four kinds of rabbit in Australia: The small grey rabbit. The red rabbit. The, larger, black rabbit. …and the big eastern grey jumping rabbit.
Love mt Tikka T1X in .22LR, I have it mounted in the GRS Bifrost stock and upgraded the trigger with a spring kit which brought it down to 1lb. Very accurate rifle.
That suppressor makes it sound insanely quiet... I don't hear anything but the trigger breaking. LOL Definitely a pretty cool rig great video as always keepem coming brother!!!
I have a T1X and I love that thing. I dropped it into a KRG Bravo Chassis, kept the stock trigger. Have a quick video on my channel shooting some steel at 200 yards with it. Super fun rifle!
Just FYI, "tikka" is woodpecker in Finnish. Name is derived from factory's homeplace, small place called Tikkakoski, which translates about to "woodpecker rapids". Finland out.
Great video. Would've liked to see it on paper at 50 and a hundred. I have mine with factory stock, DIP scope base, Burris rings and Burris 4.5-14x42 scope (side parallax), and it shoots beautiful. I believe the trigger is at about 2 lbs; maybe 2.5 lbs; from factory. Haven't made any changes of the trigger or adjustments. I have a ton of 22's and this one had been put aside for a few months. It had only been sighted in on paper at about 20 yards from the truck hood; with cheap ammo. So, yesterday I actually took it out to see what it could do at short range; 25 meters. The ammo was Lapua center x, SK flatnose match, SK match, CCI Blazer, CCI Standard Velocity, Winchester Super X Power Point, Remington Golden Bullet, American Eagle red box, and Aguila Super Extra. As expected, the higher end ammo printed pretty much one hole at that range. Both of the CCI ammo's and American Eagle hit one hole with a very close flier for each (could've been me, not the ammo). Winchester, Remington and Aguila were all still close, but not quite the "one hole" that I like to print. This Tikka can shoot way better than "minute of squirrel" with all ammo I put through it. And that really is what it was bought for; my spring-time ground squirrel getter. I would rank its accuracy, trigger pull, and everything else in the same category as my CZ 455 and almost up to the task of competing with my Bergara B14R.
I bought a Tikka T1x to start NRL22. It is amazingly accurate for a $500 rifle. The factory trigger is very good but the factory stock is worthless. Good ammo makes a huge difference IMO
Not surprised by that level of accuracy at all! My T1X is in an ORYX chassis with a Vortex Diamondback scope, and with S+K flatnose target I can reliably shoot 3/8" or better groups at 50 yards. It is absolutely my favorite rifle.
Mine outshoots every 22 i own! )which includes several Anchutz, one a 2013 with shilen match barrel in master class stock that won several ir 50/50 matches yrs ago & custom time precision bench guns. & i got it for well under $500!! in the factory stock no less.. maybe i got lucky, or maybe its lapua x-act ammo i bought yrs ago , but i won't be selling this one!
I know several GRS evangelists. The stock is a blessing for right handed shooters, it is a curse for lefthanded shooters though.It is like shooting a stock that fights everyting you do. Normal stocks, you can get used to with no problem. The GRS is a great stock for the end user, not so if you have left eye dominant brothers or sisters. It is an exeptional stock if you ordered for your specifications. That said, it is a great product, but with its own built in problem.
I have the .17 HMR. I had an older Mossberg .17 that a 12-year-old managed to wreck by forcing the barrel out of the chamber slightly, just loading a round into a badly fouled rifle. I figured a good company used to building high-powered center-fire rifles would do a better job with a rim fire. I have not been disappointed.
Thank you for this Video...I'm so excited to be waiting on my Tikka t1x mtr 22lr....I've got it to the Range now and I can say this thing is a Shooter WoW, it's very accurate in the Stock format. Look out Squirrels !!!!!@
Have a GRS Sporter Nordic Wolf with adjustable but pad on my T1x and it really transform this rifle. Another thing i didn't like was the bolt handle, it's to small/short. I fitted a nice one from High Velocity Hunting Australia, and also all his upgrades available for the T1x on mine..
The Bix n Andy is over kill. You merely need to replace the trigger spring with a cheap spring from YoDave. And you will have an exceptional trigger. As the Tikka and Sako come with great triggers. YoDave will just drop the pounds on it.
I'm jealous! I have a Tikka T3 Tac A1 in 6.5 CM with the $10 trigger spring and it is awesome. I was looking for a T1X in 17HMR to drop in a Bifrost stock but have been unsuccessful so far.
I have a 10/22 i got for my kids … but im thinking i want this setup. Im 6’3” and i have issues where i feel i need more length of pull on some of my rifles.
It's probably been asked tons, but how does everyone think this would compare to a cz 457 in a similar dress? I have experience with CZs but never had a hand on a T1X
Pretty close to the setup I wanted, still shopping around for parts, very nice Plinkster! What is the can you have on there? On the trigger, Bix'n Andy only shows triggers for the T3, same for both? If is not too much to ask, can you post a link on that trigger?
I bought some actual CCI stangers yesterday. Not like those regular stingers.. pfft. Lol. There not easy to come by up here in canada so I'm not sure if I'll ever shoot them.
Rather than a foreign European made 22 LR Tikka T1X bolt-action. ~Instead why don't you purchase a Made in the USA, Ruger Precision Rimfire bolt-action 22 LR with adjustable stock Model 8422 with American Flag Cerakote finish, or the regular bolt-action Model 8401. ~Ruger American Rimfire Long-Range Target Model 8378. ~Ruger American Rimfire Target Model 8366, stainless steel. ~Ruger American Rimfire Model 8351, stainless steel. (I have this one.) ~They use 10/22 magazines, are all bolt-actions, and come in a variety of 18" & 22" barrel models in both blued and stainless steel.
Nice looking rifle ,just can't see it kicking around in the commander ???cheap savage takes a beating ,and shoots like stink ,what more could ya want ?as I get older it gets to me seeing nicer guns in the cabinet and I grab the old savage and go to work????
Tikka accuracy is remarkable. Great shooting as always. The GRS stock looks like a fantastic upgrade!
I have a T1x. It’s the most accurate .22 I own. I replaced the trigger spring with an aftermarket spring to put trigger pull at around two pounds. Head shots on limb rats are easy. Countless rounds through this rifle, zero malfunctions. Highly recommended!
Also called "tree mice", red squirrels are edible. I have a Ruger American Rimfire, Model 8351, 22 LR, stainless steel bolt-action, and it uses 10/22 magazines.
Interesting.
We have four kinds of rabbit in Australia:
The small grey rabbit.
The red rabbit.
The, larger, black rabbit.
…and the big eastern grey jumping rabbit.
286 yds free hand? Amazing! Not just the rifle, but the marksmanship too.
Love mt Tikka T1X in .22LR, I have it mounted in the GRS Bifrost stock and upgraded the trigger with a spring kit which brought it down to 1lb. Very accurate rifle.
What barrel length is your Tikka
I've got my Tikka T1X in an MDT Oryx chassis with a Vortex Viper PST 6-24. Great rifle, especially for the cost of the setup!
Love the tikka, but still really want to see a cz457
That suppressor makes it sound insanely quiet... I don't hear anything but the trigger breaking. LOL Definitely a pretty cool rig great video as always keepem coming brother!!!
I have a T1X and I love that thing. I dropped it into a KRG Bravo Chassis, kept the stock trigger. Have a quick video on my channel shooting some steel at 200 yards with it. Super fun rifle!
Eric’s flyby is what I needed this morning! 😂😂😂
Naruto style
I’ve been looking at the t1x as a companion to my t3x. I don’t need it, but I want it.
The Tikka's LOVE Lapua Center X/SK Standard Plus ammo. I'm seeing 1/4" 5 round groups at 50 yards.
What a beautiful and quite firearm.
Just FYI, "tikka" is woodpecker in Finnish. Name is derived from factory's homeplace, small place called Tikkakoski, which translates about to "woodpecker rapids". Finland out.
Great video. Would've liked to see it on paper at 50 and a hundred. I have mine with factory stock, DIP scope base, Burris rings and Burris 4.5-14x42 scope (side parallax), and it shoots beautiful. I believe the trigger is at about 2 lbs; maybe 2.5 lbs; from factory. Haven't made any changes of the trigger or adjustments. I have a ton of 22's and this one had been put aside for a few months. It had only been sighted in on paper at about 20 yards from the truck hood; with cheap ammo. So, yesterday I actually took it out to see what it could do at short range; 25 meters. The ammo was Lapua center x, SK flatnose match, SK match, CCI Blazer, CCI Standard Velocity, Winchester Super X Power Point, Remington Golden Bullet, American Eagle red box, and Aguila Super Extra. As expected, the higher end ammo printed pretty much one hole at that range. Both of the CCI ammo's and American Eagle hit one hole with a very close flier for each (could've been me, not the ammo). Winchester, Remington and Aguila were all still close, but not quite the "one hole" that I like to print. This Tikka can shoot way better than "minute of squirrel" with all ammo I put through it. And that really is what it was bought for; my spring-time ground squirrel getter. I would rank its accuracy, trigger pull, and everything else in the same category as my CZ 455 and almost up to the task of competing with my Bergara B14R.
That's a super nice rifle. You can't go wrong with a GRS stock.
Mine is very accurate. Has weak extraction though. Stock trigger is perfectly fine. Put it in a krg bravo chassis
I bought a Tikka T1x to start NRL22. It is amazingly accurate for a $500 rifle. The factory trigger is very good but the factory stock is worthless. Good ammo makes a huge difference IMO
Not surprised by that level of accuracy at all! My T1X is in an ORYX chassis with a Vortex Diamondback scope, and with S+K flatnose target I can reliably shoot 3/8" or better groups at 50 yards. It is absolutely my favorite rifle.
Great post my friend. I always enjoy tuning into your newest post.
Mine outshoots every 22 i own! )which includes several Anchutz, one a 2013 with shilen match barrel in master class stock that won several ir 50/50 matches yrs ago & custom time precision bench guns. & i got it for well under $500!! in the factory stock no less.. maybe i got lucky, or maybe its lapua x-act ammo i bought yrs ago , but i won't be selling this one!
It's a Tikka, so accuracy is built right in! :)
Classic Kentucky road instructions. That has happened to me and my father once.
That first shot made me think you had a malfunction
Wow, really! Sounds like a dry fire.
I know several GRS evangelists. The stock is a blessing for right handed shooters, it is a curse for lefthanded shooters though.It is like shooting a stock that fights everyting you do. Normal stocks, you can get used to with no problem. The GRS is a great stock for the end user, not so if you have left eye dominant brothers or sisters. It is an exeptional stock if you ordered for your specifications. That said, it is a great product, but with its own built in problem.
I have the .17 HMR. I had an older Mossberg .17 that a 12-year-old managed to wreck by forcing the barrel out of the chamber slightly, just loading a round into a badly fouled rifle.
I figured a good company used to building high-powered center-fire rifles would do a better job with a rim fire. I have not been disappointed.
I didn’t think you would ever get one on your show
Awesome Dr Plink! Bit wee NEED a group man!!
That jet that flew by at 1:57 was the weirdest Jet i've ever seen.
That was narutoveteran8888
Great vid as always. Hi Eric! 😂
Love my T1X, gets shot more than anything I own. Nice shooting!
My Diana 34 in .22cal (air rifle) has a Discovery 6-24x42mmFFP/SF on it. I love the magnification range on them.
Thank you for this Video...I'm so excited to be waiting on my Tikka t1x mtr 22lr....I've got it to the Range now and I can say this thing is a Shooter
WoW, it's very accurate in the Stock format. Look out Squirrels !!!!!@
Have a GRS Sporter Nordic Wolf with adjustable but pad on my T1x and it really transform this rifle. Another thing i didn't like was the bolt handle, it's to small/short. I fitted a nice one from High Velocity Hunting Australia, and also all his upgrades available for the T1x on mine..
Man is that ever one sharp looking stock.
I know CCI is good ammunition but that Rifle really shoots well with SK and Lapua
My eldest loves his Tikka.... Definitely good out to 200+.
The Bix n Andy is over kill. You merely need to replace the trigger spring with a cheap spring from YoDave. And you will have an exceptional trigger. As the Tikka and Sako come with great triggers. YoDave will just drop the pounds on it.
This is some good shooting! Great video bro!
That is amazingly quiet!
I'm jealous! I have a Tikka T3 Tac A1 in 6.5 CM with the $10 trigger spring and it is awesome. I was looking for a T1X in 17HMR to drop in a Bifrost stock but have been unsuccessful so far.
I am in the market for another 22LR rifle...Tikka T1X is the one.
Sorry if i missed it what kind of supressor is on it? Thank you again for the video and all your help
Wind at 285 on a .22 has to play Havoc. I'm old, but I love Walnut with a lovely grain, Synthetic lacks any semblance of esthetics in IMHO.
Great review! Too bad that this stock has a shorter lop compared to the Bifrost. GRS need to make a 1/2" and a 1" spacer for this stock.
i love it
quiet like a dream
Nice rifle nice shooting.
Looks beautiful
Love this! What is the one screwed on the muzzle though? Thank you for this!
I have a 10/22 i got for my kids … but im thinking i want this setup. Im 6’3” and i have issues where i feel i need more length of pull on some of my rifles.
You gotta make part 2!! 👍
Would love you to take a look at the Bergara BMR. Can't decide between it and the T1X
I gotta ask what do you think of that Bolt??? And the stock trigger is nice
Did Eric turn into Sonic for a second there?
Very very nice rifle! Which camera do you use to zoom for the targets?
Hahaa wild Eric appearing
Be nice to compare it against a cz 457. Both are top quality but is any better than the other. Similar price range
Do you shoot small bore silhouette? If you don't, you should...great fun!
It's probably been asked tons, but how does everyone think this would compare to a cz 457 in a similar dress? I have experience with CZs but never had a hand on a T1X
Great review! Would you please do the new Colt king cobra 22lr ?
I know this is an older video but I have a question: you said that GRS stock was $300, where? It’s twice that everywhere I’ve looked…
I'd love to see a review of the savage a17 in 17wsm
Pretty close to the setup I wanted, still shopping around for parts, very nice Plinkster! What is the can you have on there? On the trigger, Bix'n Andy only shows triggers for the T3, same for both? If is not too much to ask, can you post a link on that trigger?
would be handy if you listed the items in a build in description.
Those who live in the south know about Bobby Sue and Piggly Wiggly, and we love them!
LOVE YOUR VIDEOS WITH 22. CAN YOU MAKE MORE VIDEOS OR ARE YOU DONE WITH IT.
That Georgia boy…he’s a bit different lol!
I bought some actual CCI stangers yesterday. Not like those regular stingers.. pfft. Lol. There not easy to come by up here in canada so I'm not sure if I'll ever shoot them.
I've got a gsg 15 that does 300 accurately. And now I'm looking for a good bolt action maybe a CZ 455 varmint to do ELR with it
hey plinkster whats your best .22 magnum video?
Is that barrel on the Tikka longer than the barrel on the Savage 64F ???
The factory trigger with a new spring will get you down to 1lbs or less and it just breaks like glass….
Thanks,🔝Reach out! I've something for you!!!!!!
That is a great gun
that first shot was so quite I thought it was a miss fire
My t1X is in 17hmr. Dead accurate.
All I heard was the trigger snap, that has to be the quietest rifle or your camera is noise cancelling each shot!!!
Rather than a foreign European made 22 LR Tikka T1X bolt-action.
~Instead why don't you purchase a Made in the USA, Ruger Precision Rimfire bolt-action 22 LR with adjustable stock Model 8422 with American Flag Cerakote finish, or the regular bolt-action Model 8401.
~Ruger American Rimfire Long-Range Target Model 8378.
~Ruger American Rimfire Target Model 8366, stainless steel.
~Ruger American Rimfire Model 8351, stainless steel. (I have this one.)
~They use 10/22 magazines, are all bolt-actions, and come in a variety of 18" & 22" barrel models in both blued and stainless steel.
Because the RPRR is living off the reputation of it's center fire brothers, it's not in the same class as the T1x.
What is the minimum length of pull with that stock? Thanks
We don’t all have suppressors. Are these TH-camrs capable of shooting without them just once for us that can’t have suppressed firearms?
Lol great cameo
Might be good for some, but I don't buy plastic long guns.
Im guessing that's a 20 inch barrel on that tikka?
Do you have a video on 50 yard accuracy of tikka
i have a tikka tx1 17 hmr with a 16.5 inch barrel would my rifle fit this stock?
6 by 24 scope? Or 6 to 24 by something?
Very quiet rifle
You should make a vid of deer hunting
Thanks,🔝Reach out! I've something for you!!!!!!
How much is this rifle with the trigger upgrade , stock etc? I love Tikka but it isn't cheap in that configuration
I want one
That thing is as quiet as a pellet gun!
is that a suppressor on the barrel tip?, its a very silent rifle.
Awesome
What is the length of barrel
Nice looking rifle ,just can't see it kicking around in the commander ???cheap savage takes a beating ,and shoots like stink ,what more could ya want ?as I get older it gets to me seeing nicer guns in the cabinet and I grab the old savage and go to work????
I’m looking for a ruger charger adapter,can you help me out
Now do it with a Henry
Is that the GRS fenris stock ?
Quick question. I was looking at this same exact rifle, just wanted to know where can I find a suppressor?
Silencershop
How can you not do groups with this rifle?
So Tikka ro savage precision
What happened with you using Henry