Toyota Camry Key Programming (Complete video)
ฝัง
- เผยแพร่เมื่อ 6 ต.ค. 2024
- Full video consists of-
1. Buying on Ebay
2. Unboxing
3. What an Uncut and Unprogrammed key can do
4. What an Cut and Unprogrammed key can do
5. How to Program the key
6. What an Cut and Programmed key can do
Lots of thanks for your detailed procedures. Your steps in this video works successfully. Works with 04 Camry.
www.ebay.com/itm/2PCS-New-uncut-Transponder-Key-Blank-2003-2010-Toyota-4D-67-Chip-/171034272693?pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr&hash=item27d26fe3b5
Thanks so much! Worked on our 2007 Solara.
SUMMARY:
1. Get in, close door. Insert and withdraw Master Key 5X; 5th time leave key in.
2. Open and close driver door 6X.
3. Remove Master Key; Insert new key and wait 60 sec until security lite goes off.
4. Remove new key; insert Master Key and start car [not sure if this step is necessary.
5. Turn off car and new key should be programmed!
NOTE--there are different sequences for different Toyotas.
For The REMOTE On The 2007 Solara/Camry [and others]:
1. With Door OPEN, insert Master Key in ignition and withdraw 2X
2. With key remaining OUT, close and open the driver door 2X;
3. Insert key and remove.
4. Close then open driver door 2X; insert key; close door
5. Turn ignition to 2 clicks to ON [not start] then off and remove.
6. Power locks should lock then unlock automatically
7. Press the lock and unlock buttons on the remote simultaneously for 1.5 secs.
8. Immediately press and hold the lock button on remote for 2 sec.
9. Doors should lock and unlock once = success. If lock/unlock cycles 2X, then repeat steps 7 and 8 again.
"There It Is"
I've tried this multiple times on my camry and it doesn't lock and unlock the doors once I turn to inhibition on and off
edog1955 i
There are several different sets of instructions to program these keys published on line. I tried 5 unsuccessfully before finding this which worked great on my 2007 Solara. THANKS BROCK.
I have a question. Before programming did your new key turn in the ignition. I'm trying to program the key, but not sure if the hardware store messed it up because it doesn't even turn in the ignition. Not sure if this is a Solara security feature or an issue with the way the key was cut. I've heard others say it turns and cranks the engine when cut (not programmed), but it just won't start the car. In my instance I can't even turn the key in the ignition or crank the engine.
Thank you so much for uploading! An auto locksmith near me wanted to charge $50 to program an extra key I had bought for my mom's car but with your video I was able to DIY it and save haha
kkk
Thank you for posting this. This procedure worked on my 2003 Land Cruiser when all others failed.
This procedure worked on my 2010 Scion tC thank you
For the impatient:
1) Buy and cut your new transponder key
2) Start at 8:06 for the instructions:
3) Put master key in and out 5 times, keep in on 5th time
4) Open and close door 6 times
5) Put in new key
6) Wait 60 seconds / until red security light on dashboard stop flashing
7) Remove new key
6) Start engine with OLD key for 5+ seconds
7) Car will start with NEW key now.
my car didnt work, 2006 corolla ce
After wasting 8 minutes he said I forgot the step,haha
I'm gonna give it a shot
Did not work on my 2010 Toyota Camry
actual video starts @ 08:40
thank me later on !
Great video - Thanks for all details. All information is useful.
278 MECHANICS / TOYATO DEALERS DISLIKE THIS VIDEO. YOU'RE OFFICIALLY A PUBLIC ENEMIE.
Very good video any body can easily understand this video the way you explained thank you
tryed it several times,sec light never comes on steady after master is pulled 5 times 2009 camry
This worked on my 2005 Toyota Highlander. You can skip to 9:00min to see the process.
Thank you . You saved me a lot of money.
Only works for older non-smartkey cars which would automatically unlock as soon as he pulled the door handle. The physical key only work for doors, glove-box and trunk but not ignition mode as shown.
Actually XSE is the best model. Pretty rare model but I still like my plain old SE with JBL, etc.
P.S. - If you press and hold the start button without your foot on the brake then will not only light up the navigation/audio and clock in the accessory mode but start AC and look like it does with a mechanical key with the whole panel lit up as in ignition mode only not start the engine. Oh, the things you lean by accident. This trick will become useful in summer for pre-cooling the car.
great video thanks to the author of this movie
Worked perfect first time. Thanks
Worked with my 2007 Camry. No blinking security light so I just waited 60 seconds before removing the new key. Toyota dealer wanted $80 to do this- I did it in less than 5 minutes.
Great! I am wondering about 2007 Camry too. Most people said it didn't work on 2007 Camry. Do you know why - perhaps not leaving a new key in 60 seconds?
I can’t get worked on my 2007 Camry
Programming start at 8:43
awerawexd awerawer
awerawexd awerawer thank youuuuuuuuu ❤️❤️
Hello Mr. Adams
I followed your video step by step, everything is working except the security light never stopped. I did several times, same scenario. What am I doing wrong? I have 2007 Toyota Camry, bought uncut keys and took care of the keys through Ace Hardware. Security blinker keep continued for over 3 minutes. Again everything working except the engine does not turn on. Please advise. Thanks
A bit lengthy, still awesome, Thank you.
With Toyota's depending on the generations but this one in particular has 2 different chipped keys. If it doesn't work you possibly bought the wrong chip key , I believe it's the D dot chip key and G chip key.
Is it the same for programing the key with the built in remote
Thanks ! I did it the first time!
👍🏽
Please help, I did the steps on a 2010 RAV4 and the security light doesn't stay on after step 3. Is there a time table or something? Please I really need help.
I only have one key for my camry. My key doesnt have any dots. Can i still program a new key?
Will this work on 2007 and 2011 Camry? I think 2006 is the cut off but not sure.
Very good explanation, will this work with a 2008 Toyota Avalon? I have the key with the built in fob.
desde venezuela, este metodo me funciono en un toyota yaris spot 2007
Thank you!
My 2010 dot key remote stopped working. The security light remains on when I insert the key but it still starts the car.
it is really great thanks alot
Did work on my 2010 Toyota Camry Altise "dot" key
I've seen several of these and it's pretty much the same but won't work on my 05 tacoma, I was able to do two remote fobs but not the transponder key
Thank you dude.. is the light still blinking? Info starts at the nine minute mark.
Good job
Does this apply to Camry 2013 model?
hey what's the part number or FCC ID of that remote. My Camry has the integrated key remote that I dislike and was wondering if I could use that remote type instead
We tried this but the security light will not turn on steady, it just stays dark. Didn't work for us. Our copy key has the same dot and is OEM. Tried this 6-7 times and won't program.
Didn't work for camry 2008. Tried several times but the security light didn't stay on.
Will this work without the master key? I lost my key!
This video/instruction definitely does not work for a 2006 Rav4,one would have thought all Toyotas are created equal?
How did you know what keys to purchase? Obviously it’s a 07 Camry with the dot in key is there anything else that makes a difference. Where did you get you key cut?
very helpful
Need to make a comeback mate.
BTW it doesn't work for Camry 2016.
Do you know if the procedure is the same for Toyota highlander 2008 ? Let me know please,thanks
excellent video. worked 1st time. you saved me a lot of money. thank you.
I tried these instructions 3 times and it didn't work on my car. 2007 Toyota Camry LE. After performing the steps the immobilizer light stays on in the video but it doesn't do that in my car. Any other suggestions? I also tried gas pedal + break pedal method and the key in ignition ON/OFF 5 times.
maybe, you bought a wrong key (wrong transponder chip), cause there is combination between the key it self & the chip. for example 4C and 4D are not the same chip. you can get TOY43 type key with a different chip.
I have the same issue as Shiraj Panjwani. I don't believe that new key has anything to do with entering in programming mode peek-a-boo which is what Shiraj Panjwani has mentioned above.
Ever got it solved?
will this procedures work for 2003 camry?
What specific software do I need to program the valet key for a 2009 Camry U.S built?? Do not reply with a generic answer - I need a company name, product number, model number, etc.
Will this work for 2009 Camry with the remote buttons?
thanks, am in Nigeria,how and where can i buy a transponder chip key?
peace obande on eBay
Not working for Camry 2009 LE. Tried many times! Any suggestion...
What if I don't have the old key
good job bro )
The Valet key doesn't open the trunk or the glug box.
Instruction starts at 8:41 - all previous talk is for new people knowing nothing.
Hi, will this work on 2014 Camry LE? Thanks for taking the time to help others in need.
Probably not..only work up to 2006 Camry I elieve.
How to program buttons
Is that the original remote? What year is that car?
Didnt work on my 2010 Camry any suggestions ?
Sergio Cortes same here.doesn't work on 2010 Camry LE
Will this work on my 1997? Camry?
Does it work for Mitsubishi Galant 2003?
Will this work with 07 Camry?
I have a 2006 X-SP Tundra this does not work, anyone know of any other processes?
The security light won't start the car
Anyone know if it works on 2002 XLE??
Superb
Doesn't work in 2009 camry...
But good great video
i want to ask is it can be done for my estima earas 2004.
I cannot do this way on my Toyota Camry 2008.
Does anyone know how to program transponder in my car?
bro i cant put my car to the programming mode can u help me with it???
How to programe remort of toyota camry 1998 thsnk you
Ok everyone I have a problem lost the program key had one made without chip car won't start any one know how to start the car ??
how to setup crown grs 182 remote/2005 please
You must have a master key. You can not make a copy of the transponder code from the VALET key. The valet key will not open the glove box AND YOU CAN NOT PROGRAM A NEW KEY FROM IT.
Doesn't work on 2009 Camry. Also video has a ton of wasted time, walking around car, opening and closing glove box. Jump to 9:00 to see the reprogramming steps.
Devin Taylor did you say it didn't work with 2009 camry ??
What if the master key is lost and only have valet key (grey key) ???
In that case, I think you need to go to the dealer. The valet key will open the door and start the car, but will not open a trunk or the locking glove box.
Yep, you can use your valet key to unlock the vehicle, and start the car. The only thing you can not do with the key is unlock the trunk with it. I have been using the valet key for my Camry for seven years.
edog1955 a locksmith can clone the valet transponder key onto an after market transponder key blank. most Toyota's use the Texas Crypto chip.
Thanks for the help but you sure over, over, over,over, over explained the whole thing.
I agree. He could've explained this in 3-4 minutes tops!!
+Al B. I think he did it slow and thorough for the rest of us
+tommie293 def could of been shorter.
2006 Solara worked great
So I have a question, once the key was cut (not programmed) did the key turn in the ignition? I'm thinking the hardware store messed up my key because it opens the doors and manual locks (not as easily as my master) but it doesn't turn in the ignition on my 2006 Solara. I'm not sure if this is a security feature or an issue with the way the key was cut. I tried this programming and it didn't seem to work. Any help is appreciated
+drac464 I cannot remember, I know it would not even try to start until programming completed. Any chance your car has had over 12 keys made in the past ? Be sure to follow all the steps and begin correctly.
This did not work for my car do you have any other suggestions I tried several times
Some cars need to be programmed using ob reader
how do you programmer 3rd key if i buy 2 extra new keys? anyone know answer me Please... Thanks
quiero programar la llave en una 4runner toyota 2000
Not working on 2012 Toyota Camry.
Did u find out how to program 2012 camry key? Thanks so much
it doesn't work for corolla 2008LE
Will this work for my scion frs
Hi, I lost the master key and I own only the valet key. Does this process can be made with the valet key the same way?
were you able to do this process without the master key? I lost my master key too so I am looking for options :)
no it does not work with the valet key
This not gonna work for 2007 camry XE
@ Seran,
As per my knowledge, yes...
Brock Lesnar .
Does NOT work on 2008 Corolla :O(
Its my work but long your video just want 5 mint video only want other people understand
this does not work for 2009 Camry LE
not working on 2009 Camry LE
I want Kia Carnival 2007
HI LESNAR WOULD THIS STEPS WORK ON CAMRY 2012 I'M TRYING TO PROGRAMING A NEW KEY NEED HELP THANKS
Me too in a 2013 camry doesn't work , how did you do it?
The car won't start 7:45
Very helpful but you talk too much.
Wont work for 2009 Corolla LE :(
Yes.. not work with my 2009 Toyota Corolla
is not work with 2012 toyota camry se
Were u able to program your Camry key? I am trying to program a key too.