Yes. Any old usb 2.0 hub will do for comms lines. They are 3.3v so external BEC powers them. Specifically I am using hard wired cheap pcb module: Industrial-grade USB 2.0 expansion module HUB For radxa image 1.5RC2, just edit /etc/default/wifibroadcast and make it = "wlan0 wlan2 wlan3 wlan4" skipping wlan1 because this is your internal wifi adapter
Hi Greg! Is this - Radxa Zero 3w w/ OpenIPC v1.5.0 the radxa 1.5rc2? When I try to modify the file - sudo nano /etc/default/wifibroadcast WFB_NICS="rtl0" to add "wlan0, wlan2" it was not working. I have 2xRTL8812AU discovered when check with "lsusb". Also if I change rtl0 it won't connect to local wifi anymore. (Internal module guess) It is working without modifying anything but idk if it's using both module. Any advice? Thanks!
I love your quite freely flight!!
smooth powerloop, cube, juicy flick, etc👍👍👍
I enjoyed it
Thanks!
Sick!
quite amazing. looks about as good as dji vista. and better than walksnail.
Sick! Cheers mate!😊🍻
How fpvvue is compared to other GS solutions? Great flying!
FPVue on Radxa is better latency than anything else i have tried. I heard Orange Pi might be 1
ms faster but not tried that
Hi! May I ask how are you using x4 BL-R8812AF1 cards? Are you using some sort of hub? And what needs to be done to radxa? Is it worth it? Thanks!
Yes. Any old usb 2.0 hub will do for comms lines. They are 3.3v so external BEC powers them. Specifically I am using hard wired cheap pcb module:
Industrial-grade USB 2.0 expansion module HUB
For radxa image 1.5RC2, just edit /etc/default/wifibroadcast and make it = "wlan0 wlan2 wlan3 wlan4" skipping wlan1 because this is your internal wifi adapter
@@sparksamplification4559 Thank you mate!
Hi Greg!
Is this - Radxa Zero 3w w/ OpenIPC v1.5.0 the radxa 1.5rc2?
When I try to modify the file - sudo nano /etc/default/wifibroadcast
WFB_NICS="rtl0" to add "wlan0, wlan2" it was not working.
I have 2xRTL8812AU discovered when check with "lsusb".
Also if I change rtl0 it won't connect to local wifi anymore. (Internal module guess)
It is working without modifying anything but idk if it's using both module. Any advice? Thanks!
Класс!!!