FPV Part:18 Air Speed Sensor Setup on Ardupilot Mega 2.6 using mission planer.
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- Installing 3D Robotics air speed sensor on the Ardupilot Meg 2.6 using the mission planner.
Air speed Sensor $24.95
store.3drobotic...
Checking for and fixing the pilot tube leak problem:
diydrones.com/g...
~-~~-~~~-~~-~
Please watch: "Runcam Owl Plus Camera with Low Light PL0075 Lens Installed for Night FPV RC Flying"
• Runcam Owl Plus Camera...
~-~~-~~~-~~-~
thanks for the clarification on which tube goes where.
It's so good to see the way arduino naturally introduces itself to people life! Nice review! Happy flying!
Thanks! Arduino makes some great stuff.
Thanks for your helpful information. No more stalls happening on my rc plane.
Love your videos! very helpful. Thank you
Thanks for watching!
Thanks for sharing!
Your Welcome
Your videos are very helpful. Can you do a video with PIXHAWK as well?
I don't have a Pix Hawk but maybe some day.
Hi. Sr, Do you have any ardupilot adjustment instruction,wich you can share with me? I'appreciate it.
Always good info, did you test the pitot tube? there are lots off faulty ones send by 3DR.
Thanks for telling about this. I put a link under the video for testing and fixing the pilot tube. Fortunately for me the one I bought tested good. No leaks!
Would like to see you fly with the airspeed sensor
Ok, will do.
Thanks for a great upload. I wanted to ask you that in the list on your computer regarding Mandatory Hardware & Optional Hardware, can sensors that are not listed still be added and able to communicate with the Ardupilot for data logging such as Temp, Humidity, etc? Or is it only limited to the options provided so you can’t add any other hardware? Thanks for your video & I look forward to your reply.
diydrones.com/forum
do you know what is the maximum speed that this sensor measures ?
I'm asking because I want to use it to measure air speed in a wind tunnel, that I'm building in university
Check here, there is a chat where you can ask questions.
3dr.com/support/articles/pixhawk_airspeed_sensor_kit/
was that wax on the airspeed ?
hahaha .... thanks for the video
It works just about like a real plane
It does? That's good to know!
hi there i wanna know is there a way we can program analog pins on the ardupilot through mission planner or smthing
I did not find any :/
ezrail007 i did not find any:/
+ezrail007 I think you have to do it through the Arduino IDE by modifying the open source firmware. Also you might be able to find code already modified for what you want to do on github.
Outstandingly wonderful job as always
HOT man HOT
Hola mi amigo,
Gracias por los elogios!
Cool man.
U R DA MAN
I see you have one coming. Super duper!