+Donald Hetzler Both yes and no. It's a standard wheel besring kit, but the early Audi A8 D2 have an oversize wheelbearing compared to later models. I had a larger cup made to accomodate this. But as long as your wheel bearing diameter fits inside one of the cup sizes you will be fine
thanks for the info. i have a '97. do you by any chance know what size the oversize cup was you had made? i've noticed that there are a few different kits out there, and i'll just make sure i get one that has a big cup.
I had it made with a diameter a little over 86,5 mm. (the bearing is 85 mm). I have not seen a kit with a cup-size over 84 mm. I think a '97 also runs the 85mm bearings.
Could you link the bearing removal kit ? I wish i seen this before. I could have done it myself instead if making suffer my mechanic with the bearings :D :D
just search "Wheel Bearing Removal Tool" on ebay. But note that I had a special cup made to fit the A8 85mm bearing. The tools doesn't go higher than 84 mm - not that I have seen
Vielen Dank für die Anleitung
Where did you get the tool to remove/install the bearing? Nice job! Making it look easy!
Handy trick, haven't "had to" change my '97 bearings yet,.. Where'd you get the kit from?
I bought it on ebay
the kit you bought, is it a standard wheel bearing removal kit, or specifically for this vehicle?
+Donald Hetzler Both yes and no. It's a standard wheel besring kit, but the early Audi A8 D2 have an oversize wheelbearing compared to later models. I had a larger cup made to accomodate this. But as long as your wheel bearing diameter fits inside one of the cup sizes you will be fine
thanks for the info. i have a '97. do you by any chance know what size the oversize cup was you had made? i've noticed that there are a few different kits out there, and i'll just make sure i get one that has a big cup.
I had it made with a diameter a little over 86,5 mm. (the bearing is 85 mm). I have not seen a kit with a cup-size over 84 mm. I think a '97 also runs the 85mm bearings.
thanks, i'll see what i can figure out.
What is part number for this wheel hub and bearing
Could you link the bearing removal kit ? I wish i seen this before. I could have done it myself instead if making suffer my mechanic with the bearings :D :D
just search "Wheel Bearing Removal Tool" on ebay. But note that I had a special cup made to fit the A8 85mm bearing. The tools doesn't go higher than 84 mm - not that I have seen
+Martin L (qqmartin) Thank you. Il check at some specialised stores for the cup you are talking about.
Where is cv joint and shaft?
+Elshan Adigozalli The complete driveshaft is removed (and you don't need to ask the same question 10 times please!)
Drehmomentschlüssel????
Молодец!
Nice work :)
me neither, a '97 240,000kms and still all good
Where is cv joint and shaft?