One button Push On Push Off ! The simplest circuit.
ฝัง
- เผยแพร่เมื่อ 3 มิ.ย. 2024
- Hi Baby channel / @baloooo
Archive www.kit-shop.org/zip/knopka.zip
Inside a PCB factory • JLCPCB Factory - 2-lay...
2N5551 got.by/2sm33k
2N5401 got.by/2sm37n
600pcs resistors got.by/2jhbvc
Buttons got.by/2sm309
My multimeteres
ali.pub/2i2mrz
ali.pub/2i2msk
ali.pub/2i2mu4
My power supply ali.pub/2i2nc0
My oscilloscope ali.pub/2i2mr0
FOLLOW ME
Instagram / akakasyan
Facebook / kasyan-tv-139150916827430
Awesome video! The simplest circuits are often the most interesting!
I've worked with a similar circuit before with a flip flop IC but yours is simpler and more fun to do with transistors. Love it. I will try it later. Thank you!
I always enjoy your good explanations.
Great circuit and thank you for the detailed explanation of the workings of the circuit. I learnt a lot.
Awesome circuit
Thanks sir I really loved your all video
Thanks for giving , sharing all your knowledge with us 😊
cool!! that was always something i wanted to play with making! very simple!
Good simple circuit. Excellent video. I love it.
Cheers from Indonesia
thank you very much .. i was looking for this circuit... thanx again
Very useful circuit. Thanks and keep up the great work. 😊
I did a very similar change to the R5 in order to make it working properly. Lower value made it easier for the bottom transistor to close
I love you. You are my favorite electronics channel.
Thumbs up!!
Nice circuit. Good explanation. Appreciate your efforts.
Muchas gracias, ya lo probé y funciona al 100 % 👏👏👏
Took a long time to actually find this circuit. Considering it's very common application, is not that good. So well done for this article.
I appreciate your efforts, good work.
Muito obrigado pela ajuda
Thanks , I have enjoyed listening to your explanation
Trimakasih saya jadi tahu dari video ini betapa simpel nya membuat saklar on/off electric.. sukses buat kamu
thankyou for making this video to show me how to build a simple latching circuit with out having to use a relay
Very good video and example! Thank You!
you guys are best. this is the best video on this topic
👏👏 Very good circuit and good explanation.
I am re-purposing LED lights from a broken screen LED TV and will use two 6V LED's to replace a stereo-microscope stock light where the lamp is missing. From a string of UV LED lights, I cut three LED's off to use for UV inspection. Both will use a 12V source. The latching switches I have are large and I need to see how this will fit since I have plenty of really small momentary contact switches like this from old free broken TV's. I think I can scavenge the boards stock for the other components also. I'm still debating if I want two separate latching switches or one latching (cool white LED) and the other momentary (UV). Have to see how this design fits. Thanks for sharing!
Very helpful,Thank you 👍👍👍👍👍
Removed the LED and associated Resistor and the output from the Collector on the second NPN works well on digital pins on the Arduino. I did find it interesting the using a logic probe on this same output kept the output low all the time.
Keep it onn......thanks for this ckt...
this circuit is so helpful to me
Useful video 👍 Excellent 👍
I had used other kind of tests.
Fortunately I understand ypur method.
Do ypu hava a pdf.
Of your explanation?
Best regards.
Belo circuito
I like it.. well explained
can you make a short circuit protection circuit using a op-amp ? or transistors ?
Thanks,friend!
Very useful full video lot of information!!!
Can you use any transistor on the circuit as long as you use the proper pnp npn type.but can you use any type of transistor to make it work.
You are great. I hope you are doing well in your country
Nice... Explanation thank you
Excellent Circuit design. I want to power arduino nano and turn auto off with arduino pulse. ... Is it possible to use it with arduino. Most of the circuit doesn't work. If yes, what modifications required at the place of switch
Thanks for the help
Can you please recommend me such readymade module which is tiny and can fit inside smaller electronic components
@Kasyan TV
The English terms most of people are searching for with this kind of circuit are "Soft Switch" "Latching Switch" "Latching Button" and "Push On Push Off"
I know I have searched for and built several variants of these circuits for my own projects.
Thanks for sharing. I know it can be challenging to figure out exactly what words people will be searching for in another language. It doesn't matter to me if you use my suggestions, but if you add these words to the title, description, and TH-cam key words it will really help people find this upload in the future ;)
-Jake
Thank you very much, I will use them)
I was thinking "momentary contact switch stay on" or "momentary contact switch latching" or "latching a momentary contact switch".
Step by step,fully xplanation,fully animation n simulation on how the latch switch working using ne556
Great
Can you tell the current direction at the switch at two stage, 1st press and 2nd press. From you video, it seem that at first press, At the Switch, current flows from left to right and at 2nd Press, current flows from right to left. Please help explain with thanks!
What if I wanted to use it with a 12v or 16v, what will change
In electronics closed means on and open means off. The opposite of what she said in the video, so don't get confused. This can be done with a flip-flop and many other circuits with less power drain.
I’d like to put 12v on this circuit do I have to change something?
thank you
It works!
Have you built it an confirm it worked
@@walttechnology Yes
We usually call a switch “without fixation” a momentary switch. It is only active for the moment you push it. It automatically returns to the previous state when released. Momentary switches can close when you press them (“momentary; normal open”) or when you release them (“momentary; normal closed”).
That is a very clear description. Normal open and normal closed often cause confuion
John Brewer Thanks. :)
excelente :)
If you hold down the switch, will the circuit turn back off? Or if it's on, would it turn back on if you hold down the switch?
Very very Interesting circuit without uC
do u sell this entire module. plz reply
Can this be used in noisy circuits like car electrics?
why do we use two 470k resistors attached on the way to the capacitor instead of any other resistors?
And what if we use another capacitor with smaller value?
On the net, you can get a schematic for an SCR circuit having much less components with the advantage of high load current. It is 12 volts circuit.
i try one of this using irf transistors, when i make a test clicking in a high speed the transistor burn really fast
Great video and explaination!! Really easy to understand. =D
Oh, i have just one question: When pressed, it stays activated for ilimited time? I've found similar circuits like this one, but they can't keep the load active for more than 5 minutes. I need one that stays on forever in my project. =D
Thankyou very much
Can i use any npn&pnp transistor?
is it posible to use abother transistor to replace the push button swtich? coz my source or signal is from arduino
Very nice I subbed ya.
Very very thanks
Please help is there any ic with that function?
Very nice sir.On delay timer video make & update sir.
Cheapest expensive more thanks
Very simple very important surkit dayagram thanks
Can i build this circuit using KT315 and KT361?
thank you veery much you are amamzing
Can you make a video with a simple circuit for single Phase AC "Soft Start?
Nice 👍 👍 👍 💁 💁 information
How many hours led. Will on.please reply
Can we substitute 2N5401 with BS250 and substitute 2N5551 with BS107? R3, R4, R6 and R7 bypassed.
Cheers from Indonesia
wow best video
Why was the circuit unstable before changing the resistor value?
How many Leds can I to connecto to out in this circuit?
Will this work with 12v?
Do you know of any such soft latching circuit as an IC package?
MAX16054AZT+T
To name one.
Muy Bonita
does the capacitor have to be polarized?
if i want to use supply voltage 24v, is there any components should be replaced?
An answers to this please
Can I use bc547 transistors
Great informative video. Circuit animation really explains it all. You gained a new sub. 👍
Can we use available transistors from electronics circuits like BC547 etc transistors?
i test using 2n2221 and bc 557 transistor and work nice. the original circuit (this one) use bc 547/557, but the creator use 2n* transistor because he dont have.. any equivalent work
නියමයි.ඔෆ් අවස්තාවේදි කොපමන් දරාවක් ගන්නවද ?
Can you please tell me how to replace the led or whatever in the output with a rellay?
Push button just activate the rellay and press it again release the rellay.
Is it possible with this circuit?
use the second version with tip42 (or use another bc557 instead). the first version act like a "active low" circuit, as positive stay on and negative pulse come in when you turn on (it´s amazing because can drive relay modules for arduino without arduino), and the version with tip42 are a "active high" version (when you press the button, negative stay on and positive take control).
Try use diode on relay if it need and check que output version with multimeter to see the working circuit
Can it also be built using Opamp reducing the other passive. components ?
Yes use 555 ic
Capasitor eloktrolit 1uf ?volt....... ?
good
Simple is using a 555 timer to do the same thing. Or just a latching switch that doesn't use any power at all.
electronic latch switch are a savior. some special and automation circuits demand a electronic latch switch because they need command for ex: to turn off by power and when circuit come back, that switch cannot turn on again or will destroy everything. even to turn off and then turn on by the own circuit to make automation without programming too much.. i need a switch like this and this work great. 555 destroy my like with inferferences even making a shield and decoupling capacitors, and destroy a expensive work of mine because they start work by theirselfes
can you give me PCB board pattern and mounting plan ?
I need a reverse circuit
When press the switch light disconnects when release light lit up thanks
Just use a logical inverter on the output. I tend to use inverting schmitt triggers as they also add a slight debouncing element.
For NPN transistor, connect load at points
1.collector > +ve of LED,
2. Ground > -ve of LEC
3. CONNECT a button to base with a resistor to +ve of battery.
You have made yourself an inverter / NOT gate.
For PNP, connect load in series with transistor, and connect a button at base to ground. And also connect +ve supply to base via resistance.
It works same as above NPN ckt. But much simpler.
Hi. Can we replace the push button by a trigger from micro controller. Thank you.
you can replace switch with transistor or mosfet but there is no point, MC can keep driving transistor open without any help from additional circuitry so all this can be replaced by just one transistor/mosfet. Keep it simple.
A D flip flop IC can be used to get the same thing without all these components. the IC is cd4013.
You will need a method for debouncing the switch, and that would invariably mean the addition of at least a capacitor.
@@arthurharrison1345 yep, a single 0.1 uf and a suitable resistor is enough.
Hi like nice video
I dont need heart i want answer answer please
👍👏
Can Bc547 Or Bc548 transistor be used
*Any change if 5v*
is the circuit stable .???meaning when on off state and suddenly power goes off and on . will it still remain off ?
couse i want to use it to power electricall heater so it won't accidentally turn the heater on
this circuit is for low voltage DC. I'm assuming your heater is powered with AC and that is going to add components
Aлександр my idea was to use power supply to power the pushbutton circuit and connect a relay to turn on the heater . Second please add standby led which will go off when the output goes high so as when one uses the circuit to turn on an appliance can see weather the device is connected to the mains correctly
Plss make this type button to control brightness of led
what is the maximum current
Thank you.but still confuse about the process.
The capacitor discharge does not affect the circuit operation