مرحبا اخي الكريم لدي نفس المشكلة مع نفس الجهاز mb20 ليس لدي عنوان ip الخاص بالماكينة لانه تم تغييره ولا استطيع الحصول عليه حتى مع برنامج Angry IP Scanner لم استطيع الحصول عليه هل هناك طريقة اخرى لحل المشكل
أهلا وسهلا اخي.. ليس لدي فكرة حول جهاز mb20 لكن يبقى لديك حلان إثنان: الأول استعمال برنامج الباسوورد مع الكود 8888 كما هو مشروح في الجزء الأخير من الفيديو. الحل الثاني هو استعمال زر الأمان tamper الموجود على ظهر الجهاز و قد عملت فيديو حوله فقط اتبع الخطوات. هذا رابط الفيديو th-cam.com/video/c5-3SXqYXNc/w-d-xo.html كل هذه الحلول مشروحة أيضا على مدونتي الخاصة .الروابط موجودة في صندوق الوصف أسفل الفيديو إذا أردت اتباعها كتابة
السلام عليكم ورحمة الله، لدي جهاز ZKteco MB20 ولكنه لا يتصل بالكمبيوتر و لا أستطيع استخدام طريقة كلمة السر باستخدام الوقت والجهاز لا يوجد فيه زر tampered ولكن يوجد فيه زر reset ولكن لا أعرف كيف أقوم بضبط المصنع باستخدامه، يرجى المساعدة
و عليكم السلام و رحمة الله و بركاته أخي الكريم زر reset لا يصلح لضبط إعدادات المصنع فهو يقوم فقط بإعادة تشغيل الجهاز... يعني الحل الذي بقي هو محاولة إيجاد IP address الصحيحة لجهاز البصمة عن طريق IP scanner
Ey! I tried all the solutions and nothing worked (tried to find IP on a few different networks). I used the password generator and my k40 just.... turn off, nothing happend, any ideas? Help!!!
Made it..... Using stathic IP adresses and trying the most common subnetworks .0.1, .1.1, .10.1 on my laptop and plugging directly PC - K40 via Ethernet cable; later used IP SCANNER till in found my Device.
Actually yes IP scanner can detect device in other networks if you know the IP address range of that network but that depends on the device if the gateway address is already set on it or not. Otherwise it can't be detected.
I never tested with KF 160 but you can try to follow the same steps maybe it will work. Because it's not working with some models. And about the time, no it's not necessary to be military, you just need to do it within a minute.
@@ramoncapistranojr.9789 it's the password from backdoor tool that i used in this video (with clock time). Also i saw the LX15 technical details, they say it can be connected to PC with USB Cable, if so try to do it, and add device in software as USB Type, if it"s connected then you can clean the admin.
hello dear, my problem is " i already connected my finger print via switch already but i can't found the device , do you have any best scanning solution. thanks
I never worked with Lx50 before, try to connect this device with USB Cable to pc and add it in the software as USB Device, if you succeed in connecting, then you can Delete the admin
@@ZKTIMETUTOS ive done it. >_< thanks for the tips. im using angry ip that u teach in the video. after that im using the vigilance software. i manage to control my own thumbprint haha. thanks for the help . really like ur video
El lx50 no tiene fuente de conexión a la red , pero puede intentar la manera del código 8888 con el generador de contraseña (es la última solución en la vídeo). Otra cosa que puede funcionar es conectar el lx50 al ordenador con cable USB y usar el programa zkteco o zktimenet para poder eliminar el administrador.
Sir I didn't work with this model before, but according to it's technical document it can be connected to the software with USB cable. So you can try to connect it by adding new device in the software with "Connection type: USB" then if it's connected you can clean the admin.
i don't know about this device but you can try one of these methods : find the ip address of the device with zktime.net / try the 8888 login + password generator (if 8888 still exists in the device) / try the tamper button in the back like I did in another video to unlock the menu or restore the default ip address.
@@lheajanemeregildo-cabudsan5597 this one : th-cam.com/video/c5-3SXqYXNc/w-d-xo.html Just follow the steps maybe it will work with you. If not try to press the tamper 3 times after 30s from device starting to get the default IP address 192.168.1.201 then you can use the software to unlock it through the network.
![[LIVE] : ONE ลุมพินี 85 | คู่เอก "ยอดเหล็กเพชร vs ผึ้งหลวง"](http://i.ytimg.com/vi/Qq_19bnnxEo/mqdefault.jpg)
Thanks a lot bro
Reset the data from the system worked for me 😊😊
sorry can you teach me how to do it? i have zk teco lx50. but i dont know how to do it. thank you
Mr Joseph was very helpful Time Machine sounds good . I appreciateThank you
السلام عليكم عندنا في المؤسسة جهاز بصمة zkteco المشكل الذي وقع له حاليا هو عند وضع البصمة تظهر رسالة صوتية تقول le temps se coule ما هو الحل من فضلكم
مرحبا اخي الكريم لدي نفس المشكلة مع نفس الجهاز mb20 ليس لدي عنوان ip الخاص بالماكينة لانه تم تغييره ولا استطيع الحصول عليه حتى مع برنامج Angry IP Scanner لم استطيع الحصول عليه هل هناك طريقة اخرى لحل المشكل
أهلا وسهلا اخي.. ليس لدي فكرة حول جهاز mb20 لكن يبقى لديك حلان إثنان: الأول استعمال برنامج الباسوورد مع الكود 8888 كما هو مشروح في الجزء الأخير من الفيديو.
الحل الثاني هو استعمال زر الأمان tamper الموجود على ظهر الجهاز و قد عملت فيديو حوله فقط اتبع الخطوات. هذا رابط الفيديو
th-cam.com/video/c5-3SXqYXNc/w-d-xo.html
كل هذه الحلول مشروحة أيضا على مدونتي الخاصة .الروابط موجودة في صندوق الوصف أسفل الفيديو إذا أردت اتباعها كتابة
👍
السلام عليكم ورحمة الله، لدي جهاز ZKteco MB20 ولكنه لا يتصل بالكمبيوتر و لا أستطيع استخدام طريقة كلمة السر باستخدام الوقت والجهاز لا يوجد فيه زر tampered ولكن يوجد فيه زر reset ولكن لا أعرف كيف أقوم بضبط المصنع باستخدامه، يرجى المساعدة
و عليكم السلام و رحمة الله و بركاته
أخي الكريم زر reset لا يصلح لضبط إعدادات المصنع فهو يقوم فقط بإعادة تشغيل الجهاز... يعني الحل الذي بقي هو محاولة إيجاد IP address الصحيحة لجهاز البصمة عن طريق IP scanner
Thanks bro for this tutorials it really worked for me, especially the angry ip scanner approach.
You're welcome sir, I'm glad it helped you 👍
Hello friend, I have a computer that restarts when I turn it on, it reaches this home screen "security for your life" and it constantly restarts
Bundle of thanks for offloading tons of burden from my shoulders. Bless you
You're welcome sir 👍
Ey! I tried all the solutions and nothing worked (tried to find IP on a few different networks). I used the password generator and my k40 just.... turn off, nothing happend, any ideas? Help!!!
Made it..... Using stathic IP adresses and trying the most common subnetworks .0.1, .1.1, .10.1 on my laptop and plugging directly PC - K40 via Ethernet cable; later used IP SCANNER till in found my Device.
@@soporte6861 hello, can I know what IP address did you use, also stuck at find IP step
@@MarobiCh My particular case was .0.211..... but it probably wasnt the Default IP.
i cannot log in because i forgot the username and password, how to restore it? thank you.
Can u help me to reset admin password without network. My device model is ZKTECO LX14
This model K40 can it work with zkBiotime, ZKBioAccess? What Web Management platform?
With Biotime yes using the ADMS option on K40, but not with BioAccess
And what do you do when the device is in another network segmentation that you don't know about? ipscanner will never detect it
Actually yes IP scanner can detect device in other networks if you know the IP address range of that network but that depends on the device if the gateway address is already set on it or not. Otherwise it can't be detected.
8888 does not work on uface 800 kindly test it and how can enter uface 800 without an IP address and without the network scanner
Backdoor worked for me, thx so much!
good, you're welcome !
what model your device? how come i cannot use backdoor
can i still reset admin password if I already used the user id 8888 but forgot to clear admin privilege? Thanks
Yes you can use the 8888 as many as you need, even if you don't Clear the admin privilege.
please what about zk ua300, the second method is not working
Does this work with KF160?
does it need to be military time?
I never tested with KF 160 but you can try to follow the same steps maybe it will work. Because it's not working with some models.
And about the time, no it's not necessary to be military, you just need to do it within a minute.
Hi bro, am using ZKTECI U350, my staff forgot all the details is it possible to reset the password for 8888 user.
Please guide me
please help me how to do it. i have zkteco lx50 and how i can reset the admin affirm?i dont know how to do it.
How did u reset then i have same one also
Thank you bro, you are my savior 👍
You're welcome my friend
Big thanks, you save my life.
please teach me how to do it.. i already did like the video but its still not work for me
Hi do you know to reset the admin settings ZKTECO BIOMETRIC WL20?
Did you try the 8888 + password method ?
can I use 8888 + password in LX15? and how to know the password?
@@ramoncapistranojr.9789 it's the password from backdoor tool that i used in this video (with clock time).
Also i saw the LX15 technical details, they say it can be connected to PC with USB Cable, if so try to do it, and add device in software as USB Type, if it"s connected then you can clean the admin.
How do you reset zk Teco Linux k40, which cannot be able to connect to the software
Did you tried the method with 8888 and password generator?
@@ZKTIMETUTOS
Yes yes I tried all but I didn't manage to even access main menu.
Kindly advice on any other method
hello dear, my problem is " i already connected my finger print via switch already but i can't found the device , do you have any best scanning solution. thanks
What is your zkt device model ??
Buena aportacion, Saludos y Gxs.
how to reset admin affirm 6 in zkteco LX16 model. tnx
Can you help me Lx50 device i deleted all the data including the fingerprint then i cant ope the admin
I never worked with Lx50 before, try to connect this device with USB Cable to pc and add it in the software as USB Device, if you succeed in connecting, then you can Delete the admin
thanks alot ,its worked
You're welcome!
Thank you for information.
i AM UNABLE TO DO IT OF... ZKTECO TX628
hello sir. how to bypass Vigilance Thumbprint machine? Help me please. thanks
I'm sorry sir I have no idea about viligance devices. I have only experience with zkteco
@@ZKTIMETUTOS ive done it. >_< thanks for the tips. im using angry ip that u teach in the video. after that im using the vigilance software. i manage to control my own thumbprint haha. thanks for the help . really like ur video
That's good 😊, I'm glad you made it
How can I get the software pls?
It work with P160?
Where to download the software Attendance Management Program?
Download link:
www.mediafire.com/file/ioo4jgcp7ii3gj8/ZKTime5.0.rar/file
@@ZKTIMETUTOS Thank you! I managed it through the second method.
Can we operate this machine from another computer on different location if we know the ip address ??
😊 thanks Bro 😊
No problem
Thanks a lot for your help ❤️❤️❤️❤️
You're welcome brother 😊
how about gt100 granding?
where to download this software?
You will find the download link in this page :
zktimetutos.blogspot.com/p/zktime-download-center.html
funcionara con el lx50 zkteco??
El lx50 no tiene fuente de conexión a la red , pero puede intentar la manera del código 8888 con el generador de contraseña (es la última solución en la vídeo).
Otra cosa que puede funcionar es conectar el lx50 al ordenador con cable USB y usar el programa zkteco o zktimenet para poder eliminar el administrador.
sir for LX15 how to reset admin?
Sir I didn't work with this model before, but according to it's technical document it can be connected to the software with USB cable. So you can try to connect it by adding new device in the software with "Connection type: USB" then if it's connected you can clean the admin.
Thanks bro for this tutorials
Thx it was work........
THANKS FOR YOUR ADVISED
how about zkteco mb560-vl?
i don't know about this device but you can try one of these methods : find the ip address of the device with zktime.net / try the 8888 login + password generator (if 8888 still exists in the device) / try the tamper button in the back like I did in another video to unlock the menu or restore the default ip address.
@@ZKTIMETUTOS for how many time i should click the tamper button?
@@ZKTIMETUTOS maybe this is their latest device
@@ZKTIMETUTOS what was the other video?
@@lheajanemeregildo-cabudsan5597 this one : th-cam.com/video/c5-3SXqYXNc/w-d-xo.html
Just follow the steps maybe it will work with you. If not try to press the tamper 3 times after 30s from device starting to get the default IP address 192.168.1.201 then you can use the software to unlock it through the network.
Thank you very much
you saved my life
thanks help full video
how to reset Eface 10
what about iface 702
i'm not sure if this 2 methods can work with it, you can try it both ways.
ياريت حلقه تصميم التقارير بالبرنامج ..
بكل تأكيد أخي الكريم.. قريبا جدا إن شاء الله
Excelente gracias
Thanks...
thanks so much
Can u plz help me it is not coming
Hello what exactly is the problem?
ANYONE TELL ME THE SOFTWARE WEB ADDRESS ?
Can you explain exactly what do you need?
Zkteco wl30 help me please
thank q
Thank you very much ❤️