thank you. Want to do something similar to the drawers with the push button. Need to study the electronics and the controller. any insight would be greatly appreciated. @@Kynosys_
어려운 문제 같아요. 유튜브 알고리즘은 분명히 언어나 지역에 차별을 하지 않는다고는 하는데, 다양한 반대의견들도 있더군요. 가장 중요한건 일관성 이라는건 분명한거 같습니다. 큰 채널의 경우에 평균 7개 정도의 채널을 운영해 봤다는 통계를 본적 있는데, 그 분들도 모두 많은 시행착오를 겪었던거 아닐까 합니다. 정답이 없다는게 채널을 운영하면서 가장 어려운점 인거 같습니다. 저보다 두배넘게 키워오신 채널이신데도 고민을 많이 하시는군요. 컨셉이 너무 좋아서 더 많이 성장하실거 같습니다. 저도 구독하고 영상 많이 봐야 겠네요. 좋은 결정 하시길 바라겠습니다. 감사합니다.
@@Argosh that's what a drill guide is for. This is a wonderfully engineered piece. But in the trade, you take small pieces to the tool, you take the tool to large pieces. If you have a 4m long beam and you need to drill a hole at the end on the side, it would be difficult to balance it in this device. You just take your drill guide and clamp it to the beam and drill your hole. I've built several beam style buildings like pole barns and the like, I can't think of a situation where this would work. 🤗
@@Argosh I actually have. I've built barns, pole barns, out buildings, etc ... When you have an 80lb 12 foot long 6x6, it's much easier to leave it on the ground and use a drill guide. And depending on what you're doing you don't even need a guide. Watch professionals build barns and they just drill all the holes for the tenon's and pegs by hand.
Your point of view is not wrong. How did you make such a mess on your desk? Your head is a mess, isn't it? To someone's question, Einstein answered: Does your clean and organized desk prove that your mind is empty?
Well done , perfect job you did . Thanks for showing
Thanks for your praise!🫡🫡
Impressionnant le résultat de cette perceuse horizontale 👍
Thank you for your words of praise. I will prepare an even better video.
Thank you for taking the time to make new videos and uploading regularly.
I deeply admire your understanding of others. thank you!
Great work as always 👏👏
Another great video!! Never stop making them!! 😊
Always inspiring!!! Studying your videos with the pneumatic drawer slides. Want to create a version.
Pneumatic cylinder control is not very difficult, so you will be able to make it with ease. I hope you create great work. thank you!
thank you. Want to do something similar to the drawers with the push button. Need to study the electronics and the controller. any insight would be greatly appreciated.
@@Kynosys_
Where did you get the worm gear from?
Search for swl1t on Aliexpress. This is a very stable worm gear. thank you!
안녕하세요 우연히 정보를 찾다가 방문하게 되었습니다..!
실례이지만 질문을 드리고 싶어서 이렇게 댓글을 남기게 되었습니다!
채널을 두개로 분리하셨다고 하셨는데 혹시 기존 채널에서 영상을 삭제하였을 때 채널의 알고리즘 변화가 있으셨을지 궁금합니다!^^;
저도 궁금했던 내용입니다.
영상을 삭제하는 기존 채널은 당연히 알고리즘에 안좋게 인식되는거 같습니다.
그래서도 채널분리는 나름 꽤 중요한 문제죠
그래서도 보통은 채널내에 카테고리를 나누는것으로 대신합니다.
감사합니다.
@@Kynosys_ 답변 진심으로 감사합니다. 저도 대표님의 현재 채널처럼 말 없이 진행하는 컨텐츠인데 최근 생각을 잘 못하여 국내 공구리뷰영상을 찍게 되었는데 다시 예전으로 돌아갈려니 국내타겟 영상을 지워야하나 말아야하나를 갈팡질팡하고 있는 중이네요ㅎㅎ
어려운 문제 같아요.
유튜브 알고리즘은 분명히 언어나 지역에 차별을 하지 않는다고는 하는데, 다양한 반대의견들도 있더군요.
가장 중요한건 일관성 이라는건 분명한거 같습니다. 큰 채널의 경우에 평균 7개 정도의 채널을 운영해 봤다는 통계를 본적 있는데, 그 분들도 모두 많은 시행착오를 겪었던거 아닐까 합니다. 정답이 없다는게 채널을 운영하면서 가장 어려운점 인거 같습니다. 저보다 두배넘게 키워오신 채널이신데도 고민을 많이 하시는군요.
컨셉이 너무 좋아서 더 많이 성장하실거 같습니다. 저도 구독하고 영상 많이 봐야 겠네요.
좋은 결정 하시길 바라겠습니다.
감사합니다.
@@Kynosys_ 응원까지 해주셔서 진심으로 감사합니다. 정보를 찾다 키노시스님의 영상미에 빠져 몇 편을 연달아 보기도 했네요! 저도 진심으로 응원하겠습니다!😁
Hello, very good job, ❤❤. Salutations de Suisse 🇨🇭, à bientôt 😊😊
Grande grande grande 😊
Now put a router bit in it and have it slide back and forth like a domino LOL
How is this better than a full sized drill press? None of the examples you demonstrated couldn't be done just as easily on a drill press.
Let’s assume there is a board measuring 2m wide and 2m tall. I wanted to drill holes precisely in this material as well.
Good luck getting that 4m woodbeam under your drill press 😂
@@Argosh that's what a drill guide is for. This is a wonderfully engineered piece. But in the trade, you take small pieces to the tool, you take the tool to large pieces. If you have a 4m long beam and you need to drill a hole at the end on the side, it would be difficult to balance it in this device. You just take your drill guide and clamp it to the beam and drill your hole. I've built several beam style buildings like pole barns and the like, I can't think of a situation where this would work. 🤗
@@MrErViLi spoken like a man who never had to drill 400 holes in the small side of 200 beams...
@@Argosh I actually have. I've built barns, pole barns, out buildings, etc ... When you have an 80lb 12 foot long 6x6, it's much easier to leave it on the ground and use a drill guide. And depending on what you're doing you don't even need a guide. Watch professionals build barns and they just drill all the holes for the tenon's and pegs by hand.
How is your Shop always that clean dude? There is less dust Thai in my living room😂
Should I clean the workshop more often than you clean the living room?
😇👍👍👍👍👍
Thanks for your interest! 🫡🫡🫡
Or use a Shopsmith.
Thanks for your interest!
I'm always happy for your kind.
I've always believed that a clean shop is on unused shop. Yours is t
Your point of view is not wrong. How did you make such a mess on your desk? Your head is a mess, isn't it? To someone's question, Einstein answered: Does your clean and organized desk prove that your mind is empty?