How to Replace Front Lower Control Arms 2008-2013 Infiniti G37

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com trq.video/ia-1...
This video shows you how to install a new quality TRQ lower control arm with ball joint in your 2008-2013 Infiniti G37. Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, or integrated ball joints that require replacing the entire arm when they wear.
Estimated installation time for a professional technician is approximately: 1 hour 18 minutes
This repair was done on a 2010 INFINITI G37 X 3.7L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2008 INFINITI G37
2009 INFINITI G37
2010 INFINITI G37
2011 INFINITI G37
2012 INFINITI G37
2013 INFINITI G37
Tools you will need:
• Pry Bar trq.video/oamF...
• 17mm Wrench trq.video/oavy...
• 10mm Socket trq.video/ocaK...
• 12mm Socket trq.video/ocFu...
• 14mm Socket trq.video/ocFu...
• 17mm Socket trq.video/ocFu...
• 18mm Socket
• 19mm Socket
• 21mm Socket
• 22mm Socket trq.video/ox5-...
• 36mm Socket trq.video/odJ-...
• Brake Caliper Hanger trq.video/oqa-...
• Pliers
• Side Cutters
• Ratchet trq.video/ocGd...
• Socket Extensions trq.video/ocFu...
• Torque Wrench trq.video/obGI...
• Bungee Cord
• Gloves trq.video/obYJ...
• Rust Penetrant
• Safety Glasses
• Floor Jack trq.video/oaYY...
• Hammer
• Jack Stands trq.video/oaKA...
• Pole Jack
• Rubber Mallet
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@Volii.]

Thank you for the video, it helped a lot!

[@triplesvn]

Needed this heads up changing mine on my 2014 q60 coupe rwd should be same process