As a gamer I assumed you could relate to someone else pushing buttons, but seeing how you’ve never hit the upload button on the TH-cam channel you created in 2006 it makes more sense.
@@JonnyBuilds Ah , yes, because having a youtube account means you need to upload videos... If that's how your logic works, probably better that you are pressing buttons now instead of patrolling the streets.
I have to admit that I was most impressed when you routed your own bowties, not just asking the C&C to do it. Gorgeous table. So many layers of thoughtful design.
The end result is awesome! One tip I think you'd like: The bolts are the only thing that stand out on the base. A way I've made new hardware look rustic is to torch off the bright silver zinc coating (you can melt wax on afterwards so they don't rust) It will leave you with a nice dark steel look. Also you can take it one step further and get the nuts and bolts red hot and hammer them a bunch to give them a vintage hand forged look! Great work! Good luck!
Elrobbo6 disappeared like Where’s Waldo! Beautiful table, and I love that you went through the trouble with fixing the wobble. Most artists would run from that instead of embracing it like you did. Beautiful piece!
Triangles. Always build the base with triangles in mind. Instead of that bottom bar you might have put in angle beams from the top of the legs to the center of the main decorative cross bars. Would provide a ton of rigidity
The flex problem on the sides even with the 1/4" plate is a perfect demonstration of why I-beams are used in construction. You could in theory just keep making the plate thicker and thicker until it works, or you could add a small spine to it. It's the same reason why a sheet of paper is floppy, but if you curve it, it can support a surprising amount of weight.
Beautiful table and, honestly, I like base #2 more than base #1. It’s less busy and more pleasing to the eye. I don’t expect I’ll be building anything so tech-reliant, but I’m awed that others know how and have the creative intuition to design and produce such awesome work results. Great job, @Jonny Builds.
I have a couple of 2'x5'x3" pieces of walnut from a walnut tree that was behind my grandparents house. It has been out in the garage for years now. As an OKC resident, Jonny is one of the few I'd trust... just as soon as I figure out what to do with it! You do some awesome stuff.
I'm in OKC and haven't heard of this lumber yard you speak of. I used to be a TIG Welder, so I REALLY love your big boy toys and watching all the cutting machines especially the plasma CNC! Some of my best times in the Sheet Metal Dept where I worked was watching the machines in process as well as the actual welding I was doing. You built a GREAT table. I love seeing your process.
This turned out great! I love all the details in the base; and I'm not normally a fan of resin logo designs in furniture like this, but you executed perfectly and it looks amazing!
Despite figuring out your problem with the base before seeing you come up with the same solution in the end. I still enjoyed the build and looks of the finished table. It's important to show people that no matter how good you think your design is or may be, that you can run into problems that require you rethink it. Hopefully, not to the same costs you endured on this project though! Having said all that, next time I am a few hours up the road in Stillwater, I'll be sure to try to stop by and have a beer on your table. Simply because I like how it came out in the end, well and to just have a good beer too!
I had a 2013 and a 2023 Honda Ridgeline for a work truck, and they were hard to beat! Great fuel mileage, and reliable. Now I have a “Traditional” truck and want either of the ridgelines back.
Beautiful table and workmanship. Only thing I might have done a little differently is the zinc bolts. Blacksmith rivets would have been my choice. Thanks.
LOVE that metal work on this combined with the beautiful epoxy in wood. Not many makers using the mix mediums and that's why you are one of my favorite . You are a fantastic artist including woodworker. Love your designs which is one of the hardest parts of projects. Now that you are partnered with Lincoln Electric I look forward to more metal work in your projects.... Yay!!! You are
Those neon like colors in the epoxy just kill me! So gorgeous and if I ever go to Oklahoma City again I’ll try and stop by to see it in person because I’m sure it’s even more stunning in person! They’re crazy to not have you build more!!!
The first bass was vary Busy. So agree with your decision on changing it ,love the simple simplicity of the second one . Did a awesome job on it lots of work went in to that. Like the small details on the bow ties. It totally makes sense to give that straight so it will last years. I’m a quilter and I tend to get some of my quilts A bit busy, because of prints it’s always a rule to use a background color to soften it or bring the colors out. It’s not woodworking But it’s still hand made ❤
Gorgeous table. That white lettering pops in the dark wood and filtered window light. I am just a DIYer but I can so relate to having something that feels so predictable need several modifications. I put an entire roof on with shingles hanging an inch off the edge only to follow up with one inch fascia boards! HA! Lol! I had to scrape paint for weeks that peeled from when the water dripped onto the fascia and then the plywood soaked it up! Still, I saved many thousands of dollars doing it myself and many years later I can say getting my pride smacked wasn't so bad for my youthful character.
You could've kept the original 1/8" steel but added extra corner supports and it would've been rock solid. But you figured it out... The table looks great!
Using a power bank like that for an angle grinder is rather hilarious. Cordless grinders are way cheaper and better than throwing sparks at an expensive power bank
But then your cordless is limited to the grinder only. With the powerbank which whilst is extremely expensive does mean every corded tool becomes "cordless". I personally would not buy one as my home electricity is extremely reliable.
No disrespect my friend. But I prefer my cords. I've had too many times when ALL the batteries are dead. With my cords, I can just keep going, with out the need to constantly changing out battery packs.
Full welds across the arches would have helped. Attaching the stretchers to the legs with bolts will be the next failure point resulting in wobble again. But maybe a sponsor will have a gadget you can use in an out of place way to fix it. Like, a portable power bank, inside the shop, with outlets on the wall.
Yeah, maybe some $10,000 gadget that weighs 200kg that does only one thing but was supplied by a partner so might as well flog how good it is that it can do only one thing when he probably has a $5 tool in a draw that does the same thing 🤣🤣😂😂
"Where's Aldo" Way to push on, adapt and overcome Jonny. This table looks absolutely sick, I'm totally jealous, but I'm working on my skill set.....kinda. Congratulations brother. This is a beautiful piece. Take care and stay safe out there. ~Jonny5🥁
I love walnut so much! Beautiful!!! I have a mini storage in Ponca full of it from a walnut tree that got hit by lightning. The right project will happen some day lol.
Box cross sections give you the best rigidity for the weight of the material that you use. Box tube is much better than angle stock. That is why you saw such an improvement when you added the channel pieces to the ends. Next time, design box sections in from the start. If you do it right, you should be able to use 1/8" steel throughout. If you want to lower the weight even more, you can make triangular cutouts in the sides of the box sections. Find a mechanical engineer to help you if you want to optimize strength to weight.
Great vid, I love watching makers do their thing but I don't think I have ever seen that many product placements and shout-outs in a single video XD I am super happy people work with you though ^^
Im sure he built his business from basic tools, from which he made some lovley wood work and for him its working because he has put the work in, people like his stuff and its been built from the ground up❤
That's progress for you! I was impressed you know how to use all those tools! I wonder if you started building furniture by hand and then progressed to machinery or do you only know how to use the machines? I am not criticizing in any way, like I said, I'm really impressed, just interested because I've been watching a lot of furniture repair and flipping videos and first time seeing you. I loved the table.
the original legs were so good! all you needed was a few tringles in each corner of the leg and you'd have been set. Hope to see a new table with those awesome designs in it!
BEAUTIFUL table, Jonny. As for driving the Honda Ridgeline, I couldn't recommend a better truck. I've owned mine since new (2008). Fifteen years later and despite having one small blemish of rust, the truck still drives like new. (FYI, though, the truck is only part-time all-wheel-drive, but it's an amazing vehicle, all the same.) 😊
Fix for this was simple, you essentially needed webbing to join top and bottom of the legs directly onto the cross bracing, this is essentially what happened by adding the c channel. With the cross bracing only fixed to sheet metal there is enough flex to allow the table to wobble. Something to keep in mind with future designs, you always have to follow bending forces to the weakest point to find your problem. Then think about a way to transfer that force to the tabletop and the floor.
Where's Aldo! Love the brewery table! We all make things that sometimes wobble. At least you figured it out it looks great! My only suggestion would be to blacken those zinc bolts. (Black oxide) other than that, it's amazing. Thanks for sharing your talents!
"Look at me, Im Jonny Builds, and I loooooove wood. Id marry a tree if i could, and have little tree babies. I dream about wood, and touch wood when im alone and look at wood when i poop. Wood wood wood hurr durr durr." This is a dope table, i love your shit.
Jonny this table is amazing, 👍👍 I have a question. I refurbished a bench. The kind with cast ends and wood slats. I used cherry and finished it with urethane however it delaminated over the winter and now the wood is weathered. Any idea of what finish I can use. It will be outside in the winter, covered in snow.
To be honest, I only found your channel by watching your video making a table using 5k paper. This is the 3rd video I’ve seen. In fair literally you need to stop thinking the worst. You have some good skills. And honestly.. Even if you didn’t. Remember the only way you will get better is by learning from your mistakes. I subbed anyway ❤️
I have had my Ridgeline since 2017 or so. It has had a *huge* amount of plywood in the back from just before the prices went nuts. I've also had long board in there (both through the sliding back window and with a trailer-hitch board support mount. It can hold quite a bit, and still has a nice non-truck ride. We take it to the dump, or to pick up mulch, stones, more. Unlike my old SUV, I don't mind beating up the truck bed a bit. I can park it in the lower floor of the airport garage, which was important for me, because that's the one with all the spaces, but it has a low ceiling. No other trucks fit in there :) Oh, and when we take it to the beach every year, I load the trunk up with most of our stuff so it's not all just out in the open bed when we stop for bio or drinks.
Love the Ridgeline commentary , it’s not the type of truck but/or the way you use it that makes you manly it’s being like vin diesel said it’s about being there for your family
hint look at old cast iron garden benches, the wobbly ones are missing a diagonal. Look at old steel bridges. There is always a diagonal in there. Iron hand sewingmachine have the same. It’s small but it ‘s there. So when this table in future get’s a problem make a diagonal tightly under the table top. Simple to make and fits in the Total look. Good luck.
I thing cutting a 2" pipe in half and welding each half to the outside like you have the C channel would also dress it up a bit. It turned out fantastic!!
WHERE'S ALDO Loved watching this. Awesome job. I love the effort that got put into the base to make it as impressive as the top. Too many builders/makers/professionals don't put the same effort in both aspects so it's great to see more of this.
Ever need any custom welding done, I'm only over in the Edmond area, I go you on mig, flux, tig(stainless, mid, or alloy) or stick(doubt you'd want stick on table legs). But you supply the metal and we could save you some $ on pre-fabbed legs. But you did a killer job on the custom legs on this beautiful piece of work!
Beautiful, beautiful table. The contrast between the bold colors and the gorgeous walnut is, well, beautiful. However, all four of the arches on the base logos should have swept all the way to the top and to the bottom of the legs, thereby triangulating the legs and eliminating any movement whatsoever.
Table is in scale and a super use of the slab with a inlay in color of clients logo which came out great, the base however is original art and outcome is spectacular. Too few people who make live edge epoxy tables pay enough attention to the bases if they even make them in house. Yours being metal plateing is a possible finish if welds are ground smooth allowing any type of finish from aged copper to silver or chrome or polished nickle or copper clear coated to keep finishes pristine could be used, just food for thought on future builds and you would be in the forefront with a very small group of craftsmen which give equal attention to the bases. New Sub. Ray Stormont
Very cool table! Im a huge fan of mixing steel with wood. In my opinion or personal preference i think black bolts would have been better, possibly square headed, then give the steel a rusted reclaimed finish to give it a more rustic look. Btw.....I would love to try a few craft beer sitting at that table!
Soon as I saw the metal you were using I could've told ya it wouldn't be sturdy enough. Then again, I was a welder/fabricator for the army so maybe I have an eye for things others don't. But its a far cry from what I'd call "almost ruined". End result looks good, the logo gives me old-skool 70s vibes
look at me, im a woodworker! I can press a button and let my $20k machine do all the work for me, im so good
As a gamer I assumed you could relate to someone else pushing buttons, but seeing how you’ve never hit the upload button on the TH-cam channel you created in 2006 it makes more sense.
@@JonnyBuilds Ah , yes, because having a youtube account means you need to upload videos... If that's how your logic works, probably better that you are pressing buttons now instead of patrolling the streets.
Your channel tagline states you’ll be sharing your gamer content, but hey, it’s way easier to give up on that dream than to put in the work.
@@JonnyBuilds Bah gawd almighty, That man HAS A FAMILY!
@@elrobbo6 Let's see your large walnut table that you make and we can judge whose is better
I have to admit that I was most impressed when you routed your own bowties, not just asking the C&C to do it. Gorgeous table. So many layers of thoughtful design.
The end result is awesome! One tip I think you'd like: The bolts are the only thing that stand out on the base. A way I've made new hardware look rustic is to torch off the bright silver zinc coating (you can melt wax on afterwards so they don't rust) It will leave you with a nice dark steel look. Also you can take it one step further and get the nuts and bolts red hot and hammer them a bunch to give them a vintage hand forged look!
Great work! Good luck!
that maybes it harder to move the table.
Be careful torching off the zinc. It’s quite toxic when inhaled.
Elrobbo6 disappeared like Where’s Waldo!
Beautiful table, and I love that you went through the trouble with fixing the wobble. Most artists would run from that instead of embracing it like you did.
Beautiful piece!
A fuckin artist? Lol.
Triangles. Always build the base with triangles in mind. Instead of that bottom bar you might have put in angle beams from the top of the legs to the center of the main decorative cross bars. Would provide a ton of rigidity
The good old triangles. They are used from building houses to other bigger structures like bridges... for a reason.
angle beams is what I would have done too...
Finding myself shouting "Triangles! You need Triangles!" at the screen... Glad im not the only one lol
Triangles are, in fact, the appetizer of stability. 🙂
@@treborsfthey are also the shape of tortilla chips, which is also a delicious and stable choice for an appetizer. Good call!
The flex problem on the sides even with the 1/4" plate is a perfect demonstration of why I-beams are used in construction. You could in theory just keep making the plate thicker and thicker until it works, or you could add a small spine to it. It's the same reason why a sheet of paper is floppy, but if you curve it, it can support a surprising amount of weight.
The ancient Greeks really knew how to arch stuff up. These relatively new wooden i-beams are incredibly light, strong and inexpensive.
This is a really great explanation of why the spine worked so well!
That project came out awesome, even with all obstacles you've had to endure. Kudos to you, John!!
Beautiful table and, honestly, I like base #2 more than base #1. It’s less busy and more pleasing to the eye. I don’t expect I’ll be building anything so tech-reliant, but I’m awed that others know how and have the creative intuition to design and produce such awesome work results. Great job, @Jonny Builds.
I have a couple of 2'x5'x3" pieces of walnut from a walnut tree that was behind my grandparents house. It has been out in the garage for years now. As an OKC resident, Jonny is one of the few I'd trust... just as soon as I figure out what to do with it! You do some awesome stuff.
Still got them? Wanna sell a couple? 👀
I'm in OKC and haven't heard of this lumber yard you speak of. I used to be a TIG Welder, so I REALLY love your big boy toys and watching all the cutting machines especially the plasma CNC! Some of my best times in the Sheet Metal Dept where I worked was watching the machines in process as well as the actual welding I was doing. You built a GREAT table. I love seeing your process.
This turned out great! I love all the details in the base; and I'm not normally a fan of resin logo designs in furniture like this, but you executed perfectly and it looks amazing!
That is STUNNING! 12 k is not enough. It is functional art. Gorgeous! Simply gorgeous.
Despite figuring out your problem with the base before seeing you come up with the same solution in the end. I still enjoyed the build and looks of the finished table. It's important to show people that no matter how good you think your design is or may be, that you can run into problems that require you rethink it. Hopefully, not to the same costs you endured on this project though!
Having said all that, next time I am a few hours up the road in Stillwater, I'll be sure to try to stop by and have a beer on your table. Simply because I like how it came out in the end, well and to just have a good beer too!
That'll be cool
I had a 2013 and a 2023 Honda Ridgeline for a work truck, and they were hard to beat! Great fuel mileage, and reliable. Now I have a “Traditional” truck and want either of the ridgelines back.
Thanks for helping @BlacktailStudio! Looking forward to seeing what you have to offer! Cheers!
🙏🙏
Beautiful table and workmanship. Only thing I might have done a little differently is the zinc bolts. Blacksmith rivets would have been my choice. Thanks.
Great idea!
LOVE that metal work on this combined with the beautiful epoxy in wood. Not many makers using the mix mediums and that's why you are one of my favorite . You are a fantastic artist including woodworker. Love your designs which is one of the hardest parts of projects. Now that you are partnered with Lincoln Electric I look forward to more metal work in your projects.... Yay!!! You are
Those neon like colors in the epoxy just kill me! So gorgeous and if I ever go to Oklahoma City again I’ll try and stop by to see it in person because I’m sure it’s even more stunning in person! They’re crazy to not have you build more!!!
The first bass was vary Busy. So agree with your decision on changing it ,love the simple simplicity of the second one .
Did a awesome job on it lots of work went in to that. Like the small details on the bow ties. It totally makes sense to give that straight so it will last years. I’m a quilter and I tend to get some of my quilts A bit busy, because of prints it’s always a rule to use a background color to soften it or bring the colors out. It’s not woodworking But it’s still hand made ❤
As someone who lives in Stillwater, I’m going to enjoy many beers at that table 🍻
🙌🙌
Gorgeous table. That white lettering pops in the dark wood and filtered window light.
I am just a DIYer but I can so relate to having something that feels so predictable need several modifications. I put an entire roof on with shingles hanging an inch off the edge only to follow up with one inch fascia boards! HA! Lol! I had to scrape paint for weeks that peeled from when the water dripped onto the fascia and then the plywood soaked it up! Still, I saved many thousands of dollars doing it myself and many years later I can say getting my pride smacked wasn't so bad for my youthful character.
You could've kept the original 1/8" steel but added extra corner supports and it would've been rock solid. But you figured it out... The table looks great!
GREAT TABLE!!! LOVE ALL THE COLOR!!! LOOKS GREAT!!!
Using a power bank like that for an angle grinder is rather hilarious. Cordless grinders are way cheaper and better than throwing sparks at an expensive power bank
But then your cordless is limited to the grinder only. With the powerbank which whilst is extremely expensive does mean every corded tool becomes "cordless". I personally would not buy one as my home electricity is extremely reliable.
No disrespect my friend. But I prefer my cords. I've had too many times when ALL the batteries are dead. With my cords, I can just keep going, with out the need to constantly changing out battery packs.
Yea, I agree. It was a sponsorship so I let it slide.
@@TheParkAttendant Totally agree but that doesn’t mean you’re going to spend 1000$ on a battery bank that you still need to remember to charge up.
@@gerbil7771 yep, your right.
Looks amazing - if only all bars/restaurants went to this level....Great Work!😊
The build was awesome and loved seeing the problem solving but man it felt like you were trying to sell me something every 30 seconds.
I complained about the same thing- I was a lot
Exactly, to many I'm using this, or I'm using that because I was given it for free and money to say so.
The table is awesome. Be sure to save the other base to use parts of it for another project. I really like it.
Full welds across the arches would have helped.
Attaching the stretchers to the legs with bolts will be the next failure point resulting in wobble again.
But maybe a sponsor will have a gadget you can use in an out of place way to fix it. Like, a portable power bank, inside the shop, with outlets on the wall.
Yeah, maybe some $10,000 gadget that weighs 200kg that does only one thing but was supplied by a partner so might as well flog how good it is that it can do only one thing when he probably has a $5 tool in a draw that does the same thing 🤣🤣😂😂
Made my day.
"Where's Aldo"
Way to push on, adapt and overcome Jonny.
This table looks absolutely sick, I'm totally jealous, but I'm working on my skill set.....kinda.
Congratulations brother. This is a beautiful piece.
Take care and stay safe out there.
~Jonny5🥁
I dunno if I have just never noticed before but I swear every other line is an infomercial for a different product 🤣
Yep. Hated it
Tax deductions.
you give me so much inspiration!! i know if someone like you can do this, literally anyone could do it. thank you
"if someone like you can do this, anyone can" 😆😆😆😆
AMAZING.
Really love it.
Great job.🎉
Excellent result and a truly functional piece of furniture. Well designed and executed John.
Base #2 is definitely an improvement. First base was way to busy. Beautiful table, and your vid is great advertisement for the brewery
I love walnut so much! Beautiful!!! I have a mini storage in Ponca full of it from a walnut tree that got hit by lightning. The right project will happen some day lol.
Beautiful, Jonny! Really fantastic work! 😃
The table looks mad!!! Well done!
Stay safe there with your family! 🖖😊
Box cross sections give you the best rigidity for the weight of the material that you use. Box tube is much better than angle stock. That is why you saw such an improvement when you added the channel pieces to the ends. Next time, design box sections in from the start. If you do it right, you should be able to use 1/8" steel throughout. If you want to lower the weight even more, you can make triangular cutouts in the sides of the box sections. Find a mechanical engineer to help you if you want to optimize strength to weight.
Great job. Looks incredible.
That table came out awesome experience great job well worth the effort
aldo is on the home depot bucket at 18:30
Great vid, I love watching makers do their thing but I don't think I have ever seen that many product placements and shout-outs in a single video XD I am super happy people work with you though ^^
Love it, I think the base would’ve looked better in black, but overall, fantastic piece
I swear I watched him spray it black.
Yeah, your ‘where’s Waldo’ table turned out beautiful. Nice product serve also.
I feel like they kinda ripped you off but as long as you enjoyed yourself and feel good about it that’s all that matters 👏🏽you did a great job
The table is absolutely stunning. I love walnut in that table just
"where's aldo" is at 18:30 on the home depot bucket
So cool, wish I had your shop !! Way to put your name to your work and do it right.
The vintage colors with the walnut look great! That’s got to be a cool table to sit or stand around. 18:29 where’s Aldo? On the bucket.
Holy shit, how did you spot that? Great catch!!
Keen eye I guess 😊and I paused it right at that moment too! @@MrsGump
What bucket?
Table turned out amazing great job. The colors look great with the Walnut the top stands out beautifully
This is not a video about building a table. This is a video about all the sponsors this guy has.
I was gonna reply something snarky to you, but after watching the whole vid I feel like 75% of the script is about sponsored tools lol
Love how you own your mistakes. Beautiful job. KUDOS!
How many tools can I promote in my videos 😂
Im sure he built his business from basic tools, from which he made some lovley wood work and for him its working because he has put the work in, people like his stuff and its been built from the ground up❤
That's progress for you! I was impressed you know how to use all those tools! I wonder if you started building furniture by hand and then progressed to machinery or do you only know how to use the machines? I am not criticizing in any way, like I said, I'm really impressed, just interested because I've been watching a lot of furniture repair and flipping videos and first time seeing you. I loved the table.
the original legs were so good! all you needed was a few tringles in each corner of the leg and you'd have been set. Hope to see a new table with those awesome designs in it!
BEAUTIFUL table, Jonny. As for driving the Honda Ridgeline, I couldn't recommend a better truck. I've owned mine since new (2008). Fifteen years later and despite having one small blemish of rust, the truck still drives like new.
(FYI, though, the truck is only part-time all-wheel-drive, but it's an amazing vehicle, all the same.) 😊
I forgot about Waldo and of course did not see him.
Where is Waldo, truly, where was he? lol What a gorgeous piece. Great job! 🤩🤩🤩
Fix for this was simple, you essentially needed webbing to join top and bottom of the legs directly onto the cross bracing, this is essentially what happened by adding the c channel. With the cross bracing only fixed to sheet metal there is enough flex to allow the table to wobble. Something to keep in mind with future designs, you always have to follow bending forces to the weakest point to find your problem. Then think about a way to transfer that force to the tabletop and the floor.
Well done on the project and thanks for putting it in one of my favorite breweries! I'm surprised they are taking it to Stillwater.
I think both versions look amazing...Great work.
Is that white epoxy eventually gonna yellow? I seen it happen to another fella on a table build and I kinda wanna use some but I’m scared it’ll yellow
I love the design. You pulled it off like a champ.
Where's Aldo! Love the brewery table! We all make things that sometimes wobble. At least you figured it out it looks great!
My only suggestion would be to blacken those zinc bolts. (Black oxide) other than that, it's amazing. Thanks for sharing your talents!
I'm going to be looking at that same truck this weekend.❤
Like second version so much better, looks fantastic. Nice job!
"Look at me, Im Jonny Builds, and I loooooove wood. Id marry a tree if i could, and have little tree babies. I dream about wood, and touch wood when im alone and look at wood when i poop. Wood wood wood hurr durr durr." This is a dope table, i love your shit.
Jonny this table is amazing, 👍👍
I have a question. I refurbished a bench. The kind with cast ends and wood slats. I used cherry and finished it with urethane however it delaminated over the winter and now the wood is weathered. Any idea of what finish I can use. It will be outside in the winter, covered in snow.
I’d use Total Boat Gleam varnish. It’s made for boats so it stands up to the elements.
If you did an instruction series on CNC (beginning to end: selecting CAD programs to troubleshooting & quirks), I would buy it.
Beautiful. Thank you for sharing this with us
To be honest, I only found your channel by watching your video making a table using 5k paper. This is the 3rd video I’ve seen. In fair literally you need to stop thinking the worst. You have some good skills. And honestly.. Even if you didn’t. Remember the only way you will get better is by learning from your mistakes. I subbed anyway ❤️
I have had my Ridgeline since 2017 or so. It has had a *huge* amount of plywood in the back from just before the prices went nuts. I've also had long board in there (both through the sliding back window and with a trailer-hitch board support mount. It can hold quite a bit, and still has a nice non-truck ride.
We take it to the dump, or to pick up mulch, stones, more. Unlike my old SUV, I don't mind beating up the truck bed a bit.
I can park it in the lower floor of the airport garage, which was important for me, because that's the one with all the spaces, but it has a low ceiling. No other trucks fit in there :)
Oh, and when we take it to the beach every year, I load the trunk up with most of our stuff so it's not all just out in the open bed when we stop for bio or drinks.
Love the Ridgeline commentary , it’s not the type of truck but/or the way you use it that makes you manly it’s being like vin diesel said it’s about being there for your family
hint look at old cast iron garden benches, the wobbly ones are missing a diagonal. Look at old steel bridges. There is always a diagonal in there. Iron hand sewingmachine have the same. It’s small but it ‘s there. So when this table in future get’s a problem make a diagonal tightly under the table top. Simple to make and fits in the Total look. Good luck.
I love it I think it is beautiful. Anybody would be proud to have that table.
Looks awesome. Blacktail would approve. Like its the Beatles.
I thing cutting a 2" pipe in half and welding each half to the outside like you have the C channel would also dress it up a bit. It turned out fantastic!!
This is totally my ASMR. I loved watching!!
I liked it.
That router blew my mind. I didn't know we were that far in the future. 😅
Awesome build, Jonny, really love the walnut / metal combo! Those plasma cut legs look really dang good!
IT's absolutely beautiful - being creative is a gift from GOD!!!
WHERE'S ALDO Loved watching this. Awesome job. I love the effort that got put into the base to make it as impressive as the top. Too many builders/makers/professionals don't put the same effort in both aspects so it's great to see more of this.
Dude, you need to buy yourself a set of Meccano and play with that for a while. It's fun, and it makes it clear how to build stuff in metal.
In the vehicle industry your wobble problem is solved by what they call boxing the frane.
Amaizing
That is so awesome. I'm so envious.
Awesome Johnny, awesome! Thank you for your skills!
Ever need any custom welding done, I'm only over in the Edmond area, I go you on mig, flux, tig(stainless, mid, or alloy) or stick(doubt you'd want stick on table legs). But you supply the metal and we could save you some $ on pre-fabbed legs. But you did a killer job on the custom legs on this beautiful piece of work!
this table is so badass. you do excellent work.
I respect your work and admire your dedication to your profession
14:32 tables looking good
Good designed
Beautiful, beautiful table. The contrast between the bold colors and the gorgeous walnut is, well, beautiful. However, all four of the arches on the base logos should have swept all the way to the top and to the bottom of the legs, thereby triangulating the legs and eliminating any movement whatsoever.
Table is in scale and a super use of the slab with a inlay in color of clients logo which came out great, the base however is original art and outcome is spectacular. Too few people who make live edge epoxy tables pay enough attention to the bases if they even make them in house. Yours being metal plateing is a possible finish if welds are ground smooth allowing any type of finish from aged copper to silver or chrome or polished nickle or copper clear coated to keep finishes pristine could be used, just food for thought on future builds and you would be in the forefront with a very small group of craftsmen which give equal attention to the bases. New Sub. Ray Stormont
🙏🙏
Wow, wow, what a job truly amazing hard graft with impressive results. Talent right there !!!
Very cool table!
Im a huge fan of mixing steel with wood. In my opinion or personal preference i think black bolts would have been better, possibly square headed, then give the steel a rusted reclaimed finish to give it a more rustic look.
Btw.....I would love to try a few craft beer sitting at that table!
It is extremely well done! Good job!
Stonecloud! Been there many times. I don't go there because of the prices and I stick around Prairie mainly. Cheers!
is there a reson to put the bow ties on the top surface instead of the bottom?
Ive heard you mention OKC before but it never clicked that you were here. thats awesome
Soon as I saw the metal you were using I could've told ya it wouldn't be sturdy enough. Then again, I was a welder/fabricator for the army so maybe I have an eye for things others don't. But its a far cry from what I'd call "almost ruined". End result looks good, the logo gives me old-skool 70s
vibes
Such beautiful wood! It's really a pity about the plastic inlays, but if that's what the client wanted...
This table is so cool!! Fantastic work!