Nice driving! God I miss racing! My impression is that your front setup is a bit too aggressive, unsettling the rear on turn-in. You had a great speed but I get the feeling that a smoother front end would have allowed you to take a bit more corner speed - you could have gained a good advantage on the back straight and attack 206 because your breaking is strong! Also, T1 seems like you lift off too much as your rear gets very loose, maybe try a bit more breaking while holding throttle - stretching the chassis makes the rear more stable through such fast corners... Well, always easier said than done, great video chap!
@@simonnicklin7413 not really. The water pump is driven around by an axle that connects to the main axle through the gears inside the engine. You rev the engine, you pump the water.
@@Willy_Wanka that would only work when the karts in gear and driving the axle, if out of gear then it won’t be turning the pump as it’s a rubber band off a pulley on the axle that then turns the water pump.
Nice driving! God I miss racing! My impression is that your front setup is a bit too aggressive, unsettling the rear on turn-in. You had a great speed but I get the feeling that a smoother front end would have allowed you to take a bit more corner speed - you could have gained a good advantage on the back straight and attack 206 because your breaking is strong!
Also, T1 seems like you lift off too much as your rear gets very loose, maybe try a bit more breaking while holding throttle - stretching the chassis makes the rear more stable through such fast corners... Well, always easier said than done, great video chap!
17:16 FUCKK!!😂😂
Anyway good race and video
Turn 4-6 is the difference, the blue guy has a better line
very epic
❤
Which cam do you use?
And do use a stabilsator or not?
Zo‘r
What's the engine sprocket and axle sprocket used at this track?
👍
The BirelART handles very well.
noy realy
@@rob-od1vm Its probably the best kx chassi right now
@@AKR-Edits No Sodi
Lekker gast
Fast track
which is fastest between KZ and KZ2 ?
Lots of professional comments below from people who never raced in ICC, sorry KZ these days
It seems you set too low pressure for race dude :) Or maybe adjust kart setup for this pressure
i dont think u know what u r talking about, this is a great setup and pressure
Wow, seriously? Hoping during minimum of 5 laps is normal for good setup or pressure? Okay :)
@@HDGamesWalkthrough the first 2 laps were warming up laps, his tyres perfectly on temperature, to much grip will make u slower
@@samvanvoskuilen343 but thats 0,01 work that last bit haha
8psi
is the video sped up?
Nope, welcome to karting:)
2:52 why do you do that ?
he just roll back and foward so the tires doesnt stick)
@@toxie3868 ok thank you
Thought that was to move some water around by moving water pump
@@simonnicklin7413 not really. The water pump is driven around by an axle that connects to the main axle through the gears inside the engine. You rev the engine, you pump the water.
@@Willy_Wanka that would only work when the karts in gear and driving the axle, if out of gear then it won’t be turning the pump as it’s a rubber band off a pulley on the axle that then turns the water pump.
Late on the throttle to much
je pakt veelste veel curbstones , dat is iets wat je op berghum niet moet doen
Berghem*
Oke Rob
@@bjornmaat4222 ojee een lettertje verkeerd , wat een ramp
@@rob8578 ik vond het in mijn tijd de leukste baan om op te rijden , mijn thuisbaan was strijen en dan heb ik het over periode 1991 tot en met 1996