@@reggi7673the "obvious" steps, when ignored, are the ones that cause ND's. I feel obligated to report you, because people like you make responsible gun owners look bad, so cheers.
@@vibingdude7188 just because he use to do painting, doesn’t mean he can’t become a police officer. For all you know he was at the academy while still doing painting. Children do painting in schools, and if you aren’t allowed to become a police officer after painting a lot of those students can’t become a police officer in the future, and about half of the current officers would loose their job.
For everyone talking about him “not clearing it”, it clearly doesn’t have a round chambered or a magazine in it. Also, since it’s a Glock 43X, you probably don’t need to pull the trigger to take it apart
Two important steps at the top that need to be included… 1. Check to make sure your weapon is clear 2. On Glocks you need to pull the trigger before you can start taking the firearm apart. The existence of step 2, makes step one even more important
Dude you’re getting lit up my guy it’s okay mistakes are made especially since you said you make a lot of videos on your off days and are also a cop stay safe out there brother may god protect you and all that you love
@@skavien95 Its an instruction video... Imagine I followed the instructions and I didn't have much firearms safety knowledge. Long story short, you have to pull the trigger to disassemble(seen lots of videos of people getting holes where they aint by field stripping a pistol). I think its valuable to teach people.
@@skavien95 No he didn't show that part. You have to remember we are in a time where there are record number of new gun owners. Lots of people don't know. Also, common sense isn't common anymore.
Good question...Half ass answer 1st step: Point the muzzle in a safe direction, clear the weapon and ensure it's safe. (No magazine inserted, ensure there is no cartridge in the chamber by visually and physically inspecting the chamber.) 2nd Step: Continue to point the muzzle in a safe direction and squeeze the trigger. 3rd step: That's where you started...
And make sure you release the magazine, slide the slide release back into the lock position and check your ammo is clear, slide the release to operating position and press the trigger with a empty chamber. Then finish the sequence with what this dude says.
It uses prongs shot out using nitrogen which is attached to the actual taser by wires. The prongs attach themselves to the person before an electrical shock is sent through the wires to the prongs which electrocute the person who was hit with it
That is not disassembling a glock, thats called called field stripping. I think the commentor who made the request deserves a full video showing how to disassemble and reassemble the gun completely (remove every part from both the slide and frame).
To everyone saying he’s fake police officers maybe think before you assume bc you can literally see him in a photo of him graduating a police academy this man is a real police officer wether y’all like it or not
I know it’s assumed for most but I’d say the actual first would be to unload and check it. For those searching how to’s, that should probably be mentioned😂
Ignoring the troll, I'll ask you to clarify a bit. Hardest to shoot in what ways? Suppression, limited but accurate fire, self defense? In my experience, the hardest weapon platform to qual in the Army was the .50, but granted my unit didn't actually qual on vehicular targets like you're supposed too. I, personally, loved shooting my M4 and 240, both platforms never failed me and were equally 'easy' to qual with. Hope this helps!
You forgot the part where you're supposed to drop the mag, clear the chamber and pull the trigger before you get to your starting step it won't take down is there is tension on the trigger
ME: My House Just Burnt Down
Johnny:"good question"
Ahh man i was gonna coment that 😂
cringe
"Good question"
Lol
@@heya.1ts.meG0kucry 😢😢
There's a couple of crucial steps you left out there
Couple obvious steps that shouldn’t need to be said
@@reggi7673the "obvious" steps, when ignored, are the ones that cause ND's.
I feel obligated to report you, because people like you make responsible gun owners look bad, so cheers.
@reggi7673 This day and age, you never know.
@@jiggyb2640 maybe I will
@@BigCountry13 true
Gotta pull the trigger to release the slide, he forgot that part
Yup. Also, make sure there isn't a mag in it. Both because you literally can't move the upper forward at all with it in, as well as safety.
Good question.
Literally the most important part. That's why everyone's here 😂😂😂
I found that out on the comments of the first video I watched!! My poor little thumbs!! Pull trigger ahhhhh😅 that's better
Also forgot to make sure there is a loaded magazine and round in the chamber too
Part 1 is really to unload and clear the firearm
Johnny: “911 whats your emergency?”
Me: “Help there is a robber in my house”
Johnny: “Good Question”
Me: how to murder someone
Johnny: “good question”
He will arrest you if you say that💀💀💀
You forgot the part where you check to make sure it doesn't have a round in the chamber 😂
Drop the magazine first prior to clearing the chamber!!
I was gonna say to make sure it’s unloaded and the the ammo and the weapon need to have some considerable separation
Hes a fake cop he used to do spinning paintings. No wonder after a year he shows up from another account as an astrophysicist
@@vibingdude7188 just because he use to do painting, doesn’t mean he can’t become a police officer. For all you know he was at the academy while still doing painting. Children do painting in schools, and if you aren’t allowed to become a police officer after painting a lot of those students can’t become a police officer in the future, and about half of the current officers would loose their job.
@@chillies4156 I call bs
You are a positive space/person on youtube. Never stop bro. We need more positivity! Much love! ❤️
And more misinformation
Step One: Do not discharge the magazine.
Step Two: Do not pull the slide back and inspect the chamber to ensure the gun is clear.
Shouldnt that be a given
Bro went from painting to army boi💀💀
You mean police officer?🤓🤓
@@___Bandit___lol bro take it easy on his thats what he meant its a figure of speech ba boi
Painting is probably his hobby after a long day at work?
@@___Bandit___What's the difference!
@@Tommyknocker.One enforces laws, one fights wars.
Step 1 is always make sure the firearm is clear.
"brother asked a very good question"
What kind of watch you wearin?
Good question
This is my third video watching this demonstration and you did it the best appreciate that. Thank you.
For everyone talking about him “not clearing it”, it clearly doesn’t have a round chambered or a magazine in it. Also, since it’s a Glock 43X, you probably don’t need to pull the trigger to take it apart
Me: what all guns do you have on duty.
Johnny: “good question”
Partner: I’ve been shot call backup
Johnny: good question
He's like the dad i've never had
I like how he says good question eventhough its a sentence
That's actually easier the I thought it would be
Bro says good question for everything💀💀💀
Hard to imagine he is a real cop after seeing him with spinning art.
Where is your badge
Always clear your weapon before disassembling it
Two important steps at the top that need to be included…
1. Check to make sure your weapon is clear
2. On Glocks you need to pull the trigger before you can start taking the firearm apart.
The existence of step 2, makes step one even more important
Dude you’re getting lit up my guy it’s okay mistakes are made especially since you said you make a lot of videos on your off days and are also a cop stay safe out there brother may god protect you and all that you love
First step: make sure it’s empty. *Please teach people safety*
@@skavien95 Its an instruction video... Imagine I followed the instructions and I didn't have much firearms safety knowledge. Long story short, you have to pull the trigger to disassemble(seen lots of videos of people getting holes where they aint by field stripping a pistol). I think its valuable to teach people.
@@skavien95 No he didn't show that part. You have to remember we are in a time where there are record number of new gun owners. Lots of people don't know. Also, common sense isn't common anymore.
Thank you so much for all the advice and things. Can you show us how to take someone down when they have a knife
I thought I was John Wick when I took apart a Glock, M4, and AK 😂😂
Always make sure it’s clear first
My Man came from spinning paints on a board to a Police Officer❤❤
I bet the sniper back there is air soft!😂😂😂😂
Holy shit that was easy, I’ve been so used to my HKs I couldn’t manipulate the switches right with the slide moved back.
This is how it feels like to disassemble a mechanical pencil
Look like a shadow Company soldier
Have you ever pulled over someone who's recognized you from social media
He went from spinning paint a round to a police officer 😂
you forgot to tell them to clear the firearm before disassembling it, just mentioning it no hate, love your vids man
Where the paint vids at man you were the best at those
You went from spinning art to a police officer!?!? AMAZING! 👍😍🤩
First check for clear and safe!!!
Always remember to clear the firearms first. Next depress the trigger, slide won't come out if gun cocked.
Good question...Half ass answer
1st step: Point the muzzle in a safe direction, clear the weapon and ensure it's safe. (No magazine inserted, ensure there is no cartridge in the chamber by visually and physically inspecting the chamber.)
2nd Step: Continue to point the muzzle in a safe direction and squeeze the trigger.
3rd step: That's where you started...
That comment that just appeared in this video even says 9m- 💀💀💀
Me:hi
Johnny: good question
Hi Johnny , Why are you so hellbent on proving you're a real cop to total strangers on the internet?
TH-cam cop 👮♂️
PLEASE HELP HES IN MY HOUSE him: good question
People be saying he is a fake police officer. When he has the outfit, the cuffs, the gun, and probably the taser.
I usually pull a trigger first to check if the gun is loaded or not and then I disassemble
And make sure you release the magazine, slide the slide release back into the lock position and check your ammo is clear, slide the release to operating position and press the trigger with a empty chamber. Then finish the sequence with what this dude says.
First thing is make sure weapon is clear. Always.
Bro, I didn't knew you were the guy painting and spinning it
Forgot the part where you have to pull the trigger. Not trynna be that guy but when I got my first gun I didn’t understand that part 🤣
Little did he know, that he just taught the quiet kid how to disassemble his own glock.
Clear the weapon, make sure the trigger is pulled before the slide will remove.
Reminds me of a scene from new police story when the main character and the villain do a Glock gun assembly race
"Welcome to wendys, how may i take your order?"
Johnny: "good question"
I like how no one ever asks a question. They're all statements he is reading.
I bet you're great with kids. Teaching them to respect law enforcement. Than)s for you service.
Just waiting for him to say bad question
How does a tazer work?? What does it use?? Ammo or what
It uses prongs shot out using nitrogen which is attached to the actual taser by wires. The prongs attach themselves to the person before an electrical shock is sent through the wires to the prongs which electrocute the person who was hit with it
1st Check the chamber visually and physically.
This shows how even Leo's get a little loose.
Just like the Cod mw2 ending scene
Honestly, that’s a beautiful gun
I still kinda miss the spin art vids 😢
Have u ever seen anybody break a gun in half
Can you show us the difference of cops in the movies and in real life 😊
Can you talk to a cop and say: i'm a cop!
Guys quit talking trash he help us keep us safe
yooo he smooth with ittt WWWW
That is not disassembling a glock, thats called called field stripping. I think the commentor who made the request deserves a full video showing how to disassemble and reassemble the gun completely (remove every part from both the slide and frame).
Can you show us how to disable a light activated pipe bomb
Skipped some important stuff, is that all gonna be in the asmr version lmao
Missed the first 2 steps.
1. Check that it is unloaded
2. Pull the trigger
3. Proceed as shown in video
Are real cop csise either way your cool
“Checking that the guns clear” has left the chat
To everyone saying he’s fake police officers maybe think before you assume bc you can literally see him in a photo of him graduating a police academy this man is a real police officer wether y’all like it or not
Modern warfare 2 post credit scene
Can u do asmr on the mags it’s really satisfying
Dont forgor to make sure the handgun is empty (even the chamber aswell) and press the trigger before the disassembly.
Yeah like pulling the trigger first or after pulling tabs
1 make sure firearm is clear.
1. Check make sure it's empty.
I love this guy you the best dog
Hey I've been whating to be a cop since I was 5
I know it’s assumed for most but I’d say the actual first would be to unload and check it. For those searching how to’s, that should probably be mentioned😂
Ask this guy any questions even stupid ones;
This guy: Good question
The next video can you show us how you can handcuffed people please Mr. Johnny
"my family died in a car crash"
"good question"
yeah like that’s gonna happen to your family
You forgot the safety check before disassembly
Skipped over the whole dry fire first thing. Kinda important or it won’t come apart lol
Absolutely no. The first thing ALWAYS is make sure it’s clear and safe. Teach good habits so others follow.
lmao “beaver tail” it’s called the tang
What gun is the most difficult to shoot?
What kinda dumb question is that 😂
Bro is hating 😂😂😂
Ignoring the troll, I'll ask you to clarify a bit. Hardest to shoot in what ways? Suppression, limited but accurate fire, self defense?
In my experience, the hardest weapon platform to qual in the Army was the .50, but granted my unit didn't actually qual on vehicular targets like you're supposed too. I, personally, loved shooting my M4 and 240, both platforms never failed me and were equally 'easy' to qual with.
Hope this helps!
please show us how to make a ghost gun "good question"
You forgot the part where you're supposed to drop the mag, clear the chamber and pull the trigger before you get to your starting step it won't take down is there is tension on the trigger
How It feels disassembling a ball pen
Glock is the greatest firearm ever invented
Probably shout check the chamber first and remove the mag that's the first step u started at the second move brother
Make sure you clear before dissasembly
Could you show us your police officer gear? Everything you have on you, weapons included