Do off the shelf cheap PDR tools even work? I find out with this sill crease! Glue Pulling!
ฝัง
- เผยแพร่เมื่อ 5 พ.ค. 2021
- **Product Links At The Bottom Of Page**
This damaged sill came in last minute on Friday afternoon.. the customer wanted the car sold and gone by the weekend with a buyer lined up. I had a small 2 hour time slot to try and make as big of an improvement to the damage as possible!
No time for filler and 2k primer and my usual methods! A perfect opportunity to try these cheap Chinese PDR tabs and pulling brackets out then! I've been wanting to try these out for ages!
Simply glue them on with hot glue, then pull them off with a slide hammer or pulling rod to pull out the dents. This sill was tough but it did a great job.
A quick sand over and some colour and lacquer was applied to finish the job. not 100% perfect... but a HUGE improvement... and the car was sold the next morning with no issues! The buyer never even noticed! Happy days!
Hope you enjoyed this vid. This is definitely something that can be done on a tight budget and can achieve great results.
Please check out www.paintgear.co.uk for DIY kits and accessories. Detailing and car cleaning range available also.
Thanks for watching guys! CVR POV
PRODUCT LINKS:
Air Compressor: amzn.to/3kiD2ED
10M Air Line: amzn.to/3nNGCsN
Rotary Polisher: amzn.to/2XC7ilt
Electric Sander: amzn.to/3zjjnJ4
Air Sander: amzn.to/3EvV0vI
Sanding Discs: amzn.to/2XzAWb0
Polishing Pads: amzn.to/3Epa6D0
Fade Out Thinners: amzn.to/3lsfMDC
Sony ZV-1 Camera: amzn.to/3ly7N86
Heavy Duty Tripod: amzn.to/3nEkfG1 - ยานยนต์และพาหนะ
![[Watch Party] APL 2024 Bacon Time Vs Hong Kong Attitude ชนะเข้ารอบ](http://i.ytimg.com/vi/ikUfW81sDaw/mqdefault.jpg)
Absolute huge improvement, fair play 👌🏼
Thanks mate. Was just a video with DIYers in mind
Brilliant vid, some great ideas here
Thanks Nick
Massive improvement bought some budget pdr stuff to try myself, 👏 👏👍
Good stuff!
Looks good!👍
Thanks 👍
Back yes about time need more ok👍
Nice job.
Thanks Richard
Beautiful
Thank you! Cheers!
Nice job
Cheers
Amazing result! Got something similar to sort on my sill where can you but them tabs that you stick on?
Theres one set available over at www.paintgear.co.uk
Panel being clean, panel temp and glue temp is what matters. Tabs dont matter. They're plastic. You can make a tab out of anything including wood. Im a collision and gpr everything now. I no longer use a spot welder
Nice one
I tried it on my own car and the plastic tabs just pulled the glue off. Any recommendations?
@@Richard.E84 your glue has to get up to 375 degrees. Regular glue guns can't do that. You need a 300 watt one. The glue needs to be smoking hot. Put it on the tab, place the tab and let it sit until it cools down to around 90-85 then make your pull. Also if you use cheap glue you'll get bad results. All glue isn't the same. When you apply the glue you don't need to drown the tab. Put on enough to squeeze a little around the edge of the tab. Takes practice to do this of course
@@Super_Sport_Marc Thanks, I was only using a regular glue gun
How does someone go about using your services please??
Awesome! Do these tabs work well with hail damage?
Should do 👍🏼
@@cvrpov Thanks!
Glue all the tabs at once to start helps to
cheers
Whats the kit / tool called and where can you buy , awesome job btw 👍🏻
Glue pulling kit mate. Try a Google search
why didn't re stone guard it after you applied filler to the dent as pulling it wasn't enough ??
It was a very quick tidy up for a car that was being collected by the new owner the day after. The video was to demo to DIY inclined viewers about very budget glue tabs.
1st clean the shite out of the paint and pull tab with 91% isopropyl alcohol , get stronger tabs and glue
thanks for the feedback
How can I get in touch with you
Hi any link for these tabs can't find on the website?? Also can you use any hot glue sticks?
We don't currently sell these anymore unfortunately
@@cvrpov ok thanks for letting me know bud, what about the glue sticks are they special ones or any will do?
@@alekkela6070 most will do
Maybe if you put hot water on the metal it would work better.
Possibly yes
There is a great PDR tools cold glue in USA it's exspensive but it works 100% if u want the name let me know.
Isn't cold glue just the same as butyl glue just ten times more expensive?
@@mesmerize15 there is a better one in the cold glue but lots more expensive indeed
I would appreciate the name please.
@@wheelsone6180 it's called Glexo PDR Tools glexotools.com hope it helps this stuff is the best.
@@Snip59 Appreciate it, thanks.
How much filler did you put in ?
None
Not easy indeed
Kitne ka hai yah tools
Several glue tabs and a slide hammer