An Infinity Stone Of Radial Racing. Racecraft Relocation Kit Install For 8.8 - Episode

Trying to perfect suspension for a radial tire can be aggravating. It’s a lot of geometry, testing, and botched passes. So we’re here to tell you the secret so you don’t have to go through the struggle like we did. This bracket is a key piece in the geometry to achieve better bar angles for separation, weight transfer, and body lift for some radical 60ft’s.
Racecraft Relocation Brackets:
www.racecraft....

[@damonrice8469]

Nice stuff! Im in the process of repairing my rear end now and its the perfect time to do this mod. Thanks Garret.

[@2ndshiftracing]

No problem!

[@jamiesvt]

Nice to see some fabrication good job !

[@2ndshiftracing]

Thank you! Will only get better!

[@MikesGarageRoute66]

Another great video 👍🏻

[@2ndshiftracing]

Thank you!

[@vrm86gt]

Thanks! going to be a nice 8.8!

[@justin.c_svt]

Fabulous. Well done and easy to understand.

[@2ndshiftracing]

Thanks for the feedback!

[@smittys_03svt21]

Great stuff. I've got a stock '98 GT SRA and the rear end is the last thing I've got left to do for my Cobra. Thanks for the pointers! Thinking about a 31 spline eaton true trac setup with the braces you've got.

[@2ndshiftracing]

The truetrac is a solid piece for racing. But…if you’re on a budget, the Ford Racing Cobra Posi will work fine for a fraction of the cost.

[@smittys_03svt21]

@@2ndshiftracing I was thinking about having a 3-5k budget for the rear end build. My only issue is I don't have access nor do I know how to weld, so I'm going to have to pay someone to do a majority of the installs. The car is 99% street driven, but I'd like to be able to hurt some feelings on the track once or twice a year. Plus I like the idea of no more clutch packs with the True Trac. Maybe it's overkill?

[@ericdebisz9458]

This was really good. Ive been out of the loop for a while ans when you daid Racecraft a little light came on. I know all the team z shit is legit. I run baseline on my fox body. Always did me well. I like these and might factor them into my rear suspension

[@2ndshiftracing]

The work extremely well. We’ve cut 1.25’s on them with a stick car

[@nickb289]

Wouldn’t it have been easier to mount the relocation brackets before the bottom brace?
Also why not weld the inside of the brackets?
Not being negative I enjoyed the videos and look forward to seeing more.

[@2ndshiftracing]

Eh…maybe. We did weld it on the inside also. But not by itself cause it will flex and move when put under stress. So you need to weld the outside too.

[@TomR1211]

Have you guys narrowed this rearend with these brackets on it? Or the bracket is too close to the rim to trim any from the outside of the axle tube…?

[@2ndshiftracing]

Yes, shorten 8.8 with 9” ends. Clears wonderfully.

[@TomR1211]

@@2ndshiftracing how much did you cut off each end, and what BS wheels?

[@2ndshiftracing]

@@TomR1211 Think it’s like 2.5” per side 4.5 bs on the wheels. There’s a photo of the red car on our instagram.