I replaced my shocks with proline SC front shocks, replaced the axles with ar44 axles, replaced the driveshafts to get the ar44 axles to work, and lastly I replaced the links with axial links.
Those stock shocks do need a complete overhaul/rebuild. Mine run silky smooth now, no sticking anymore. Sanded/filed the piston (sharp edges), slightly widened the piston holes, polished the shaft (...), filed and polished the shaft outlet of the casing (that's where it actually gets stuck), greased the o-rings, refilled with fresh oil and voila, super smooth shocks.
Had the same problem with the schocks, refilled them with 400 gauge and bleeded them. Then I found on thingiverse other schockmounts for the rochobby. 3D printed them and elevated the rig with approx 1cm. Only happy times now when I'm running with the Willy's Jeep
Hahahahahaha!!!! You are killing me dude!!! Great to see you working on this rig. On my Trx4's i haven't done to much. Swapping a jeep body for my defender body made the biggest difference for stability. And bave a few wheel and tire setups that i swap.
My shocks stuck as well. I ended up removing the oil and two translucent bottom washers, plus moved the upper mounting point so they had no side strain on the pistons. I removed all preload on the offside shocks and added a 1/4" on the nearside to take up the weight of my military figure, making the jeep run level. The body weight stops most spring bounce and the suspension soaks up the bumps lovely at any speed. If it was a basher I'd use oil in the shocks but this heavy slow jeep doesn't need any IMO...👍
I replaced the stock shocks with brand new pull-off shocks from a Traxxas TRX-4 I got from ebay. The only things I had to do to make them perform flawlessly on the 1/6 scale Jeep were: (1) swap the pivot balls from the OEM shocks to the Traxxas shocks; and (2) reduce the spring preload on the new shocks.
I put stock redact gen 8 wheels and tires on mine and it made it look a lot more cool, but my shocks are seized though and the big tires rub with out proper flex
Do you think it’s possibly to convert these to leaf springs. My buddy has one and it looks tuff to do since the front axels are right at the edge of the frame
Sweet. I just finished some shocks for the axial II umg10, . Yesterday, in THE upcoming stay tuned in, for,, . 💯. . I have the Crawlmaster 540 5-slot 20t, in , on the hobbywing ESC 1080. 👊👍👍
I have had bad luck with my incisions shocks... leakage and the like.. I've been using the proline scalers with far more success. I do like that, jeep tho'!
Thinkimg about swapping out the stock Gen 8 Axe shocks for a set of Proline Big bore 90mm. Was looking at the Pro Spec Crawler by Proline til i read a lot of reviews about leakage.
Man you get at least 20 views a day from me (at very least) your awesome but honestly sometimes I get jealous I catch my girlfriend watching Holmes hobbies TH-cam videos she likes you more than I do damn you John Holmes!
✳️Good day John ! 🙂 - Would you be so kind as to pull out your AXIAL TRAIL RANGER, when you get a chance !?? -I think it is.....ya, the green one with flames ! 😉 - I have never seen one 'til today, on-line, and I am 1-year into the crawler/scale segment. 🙂 I bought a SCX10 II Jeep Cherokee Kit for $299 from HOBBYTOWN USA back in April, this year.... great product & awesome quality, very durable as well !! So I find that I'm researching the AXIAL rigs from the prior 8 years or so, cuz of their simplicity & radical lines. (design stuff !) - There's something desirable about the angles & proportion of the TRAIL RANGER BODY, to me !! -😲(this is new to me) -Would you possibly do a refreshed- review ?? 🤔 -I think some people new to the RC crawler/trail truck segment would enjoy seeing it for their first time, like myself. -Just throwin' it out there ! 😉 -Thankyou John !! 😁 - Have a great weekend brother !🤘 - Portland, OR 🇺🇲
I had one of those hard body willy's I started to do a build on, on my other channel Rc Crawler Workbench. Also got videos using HH ESC'S, Motors, server's, and lockers. I'd appreciate any views and feedback.
120mm would have worked awesome you would have maintained ground clearance plus you would have had droop. Doesnt look like you can climb over a paper plate now brother. No disrespect just saying 👍
Hey elder brother i just want to request you for my birthday gift coming on february 25 my birthday and i just want to request you a sur ron electric dirt bike i like it so much brother thanks brother
I long for the kind of happiness i see in John's eyes when he's playing with his toys.. :)
I replaced my shocks with proline SC front shocks, replaced the axles with ar44 axles, replaced the driveshafts to get the ar44 axles to work, and lastly I replaced the links with axial links.
What size axial links? I’m new to this
Those stock shocks do need a complete overhaul/rebuild. Mine run silky smooth now, no sticking anymore.
Sanded/filed the piston (sharp edges), slightly widened the piston holes, polished the shaft (...), filed and polished the shaft outlet of the casing (that's where it actually gets stuck), greased the o-rings, refilled with fresh oil and voila, super smooth shocks.
was rolling watching the rotor roll off the table, that look is the same on I have when stuff like that happens
Had the same problem with the schocks, refilled them with 400 gauge and bleeded them. Then I found on thingiverse other schockmounts for the rochobby. 3D printed them and elevated the rig with approx 1cm. Only happy times now when I'm running with the Willy's Jeep
Hahahahahaha!!!! You are killing me dude!!! Great to see you working on this rig. On my Trx4's i haven't done to much. Swapping a jeep body for my defender body made the biggest difference for stability. And bave a few wheel and tire setups that i swap.
This is a great series!!! Please keep improving this rig!! I’m getting one too because of you.
My shocks stuck as well. I ended up removing the oil and two translucent bottom washers, plus moved the upper mounting point so they had no side strain on the pistons. I removed all preload on the offside shocks and added a 1/4" on the nearside to take up the weight of my military figure, making the jeep run level. The body weight stops most spring bounce and the suspension soaks up the bumps lovely at any speed. If it was a basher I'd use oil in the shocks but this heavy slow jeep doesn't need any IMO...👍
Getting some Bob Ross vibes here😁
Another highly entertaining video.
Very nice toy sir wish have that in my room.
Cannot say that Vanquish shocks would be my first choice for using as replacement shocks. Takes some playing around with to get them right.
I replaced the stock shocks with brand new pull-off shocks from a Traxxas TRX-4 I got from ebay. The only things I had to do to make them perform flawlessly on the 1/6 scale Jeep were: (1) swap the pivot balls from the OEM shocks to the Traxxas shocks; and (2) reduce the spring preload on the new shocks.
great
I put stock redact gen 8 wheels and tires on mine and it made it look a lot more cool, but my shocks are seized though and the big tires rub with out proper flex
Do you think it’s possibly to convert these to leaf springs. My buddy has one and it looks tuff to do since the front axels are right at the edge of the frame
Sweet. I just finished some shocks for the axial II umg10, .
Yesterday, in THE upcoming stay tuned in, for,, . 💯. .
I have the Crawlmaster 540 5-slot 20t, in , on the hobbywing ESC 1080. 👊👍👍
Yes, take it off!!
Yes, the stock shocks are terrible. It's the first thing I changed the day I got mine. Also installed a stronger steering servo. Love it!
just got this jeep in today I got the 1/12 scale my q is can I use the spectrum smart battery and what conector do I need I am new to this hobby
I could see myself hanging out with you sir. I'll just keep dreaming.
Great video cheech
I want you to know I just watched SteveKnows play Quest games while being shocked, then came here to you installing shocks. I was like, "Awwwwwe".
I just ordered this vehicle, I hope my shocks are better! If not I will have to order some new ones too.
Just change the shock oil to 25w and u have excellent shocks, remove rear spacer.
Thanks for the tip!
If I were to change out the stock 3 slot 35T motor for a HH 5 slot motor, which one would you recommend? How about a brushless system?
Hi Bruce....
Is this body able to be disassembled to paint a different exterior and interior? This rig looks fun!
Office documentary at Holmes hobbies. I’d watch it.
I have had bad luck with my incisions shocks... leakage and the like.. I've been using the proline scalers with far more success. I do like that, jeep tho'!
Thinkimg about swapping out the stock Gen 8 Axe shocks for a set of Proline Big bore 90mm. Was looking at the Pro Spec Crawler by Proline til i read a lot of reviews about leakage.
I seriously need to know what your smoking 🤣 your allwyas nuts in your videos
Certain states carry it, if you are of age.
Man you get at least 20 views a day from me (at very least) your awesome but honestly sometimes I get jealous I catch my girlfriend watching Holmes hobbies TH-cam videos she likes you more than I do damn you John Holmes!
Such a fun channel, really dig the lighthearted vibes, like always 🤙 doesn’t everyone change stuff on their rigs? 👍💥💯🤘
What mm shocks did you install on this? Mine sag they dont hold the body
Is this rc good for a beginner like me. 👍
I also bought those shocks for my rig. Being a huge fan of Incision and Vanquish, i was a little disappointed because they leak. I hope yours don't.
The body is coming off
Trx-4 shocks are the best
Carnitas excellent choice in tacos!!
✳️Good day John ! 🙂 - Would you be so kind as to pull out your AXIAL TRAIL RANGER, when you get a chance !?? -I think it is.....ya, the green one with flames ! 😉 - I have never seen one 'til today, on-line, and I am 1-year into the crawler/scale segment. 🙂 I bought a SCX10 II Jeep Cherokee Kit for $299 from HOBBYTOWN USA back in April, this year.... great product & awesome quality, very durable as well !! So I find that I'm researching the AXIAL rigs from the prior 8 years or so, cuz of their simplicity & radical lines.
(design stuff !) - There's something desirable about the angles & proportion of the TRAIL RANGER BODY, to me !! -😲(this is new to me)
-Would you possibly do a refreshed- review ?? 🤔 -I think some people new to the RC crawler/trail truck segment would enjoy seeing it for their first time, like myself. -Just throwin' it out there ! 😉
-Thankyou John !! 😁 - Have a great weekend brother !🤘
- Portland, OR 🇺🇲
If I sent you a 1220 brushless inboard motor that is 10300kv I have in my scx24 could you improve its design?
Is this 100% waterproof from stock?
"..noothing on the front"..it is like the original :D
I was thinking about throwing portals on mine 🤔
that would be sweet
Couldn’t you just ease up on the preload on the stock shocks? Wouldn’t that solve the problem?
Makes me want to break out my Wicked Willie
What about driveline up grades
how much for those shocks that dont work?
You're definitely going to take the body off.
You won’t take the body off.
No high fives. They haven’t been cool since Top Gun.
Nope. You’ll just leave it for added frustration lol👍🏽🐒🇺🇸
👀
I guessed right, and stock rigs, of course my rigs are "stock"........ish
Round in the chamber, lmao!
#UGADUGA
I just got mine today and shock stick out of the box -.- took one apart and it looks like the rods are poorly made and scratch up.
I had one of those hard body willy's I started to do a build on, on my other channel Rc Crawler Workbench. Also got videos using HH ESC'S, Motors, server's, and lockers. I'd appreciate any views and feedback.
Yo mr Holmes what taking forever to get my shv500v3 order it the 28th😡
If you can make that a respectable wheeler I'm getting one too.
I'm going to guess removal
120mm would have worked awesome you would have maintained ground clearance plus you would have had droop. Doesnt look like you can climb over a paper plate now brother. No disrespect just saying 👍
Put some clothes on Bruce! Kids might be watching 🤣🤣🤣
Heeeeeey my name is Bruce..................... And I'm a black guy! Cool! 😂
Can not handle a stock rig at all the electronics are always first to go I wish they made more rollers
Most likely take the body off
Depi ayiti jeveu achete yunn
😂
Hey elder brother i just want to request you for my birthday gift coming on february 25 my birthday and i just want to request you a sur ron electric dirt bike i like it so much brother thanks brother
Yikes...you talk too much!!!
You would be surprised how few people watch tech videos without words.