Missed out on Kingdom Galvatron. Just couldn’t find him anywhere. Luckily, I found TWO Legacy Galvatrons today at Target. So happy. Thank you Emgo316 for showing me how to transform it correctly without breaking it. Most of the time, the instructions are confusing.
Just a shout-out that this is still paying dividends, as I've had this guy for years but absolutely COULD NOT remember one crucial step! As always, thanks for all you do, man!
Appreciate these videos. First time transforming him back to robot mode. The chest was stuck and I could not get the head out. Felt like it would break pulling it apart. But the video reassured me I was doing it right. I did notice you didn't have it fully in latch. So it was a smooth and easy pull for the vid. Sneaky.
I wasn't able to get this guy until the legacy release. He's great. My copy seems to have some fitment issues with the chestplate and arms in alt mode. This video helped me with that.thanks
Same here. One side seemed like it wouldn't reach as far, so I started with that side instead and it worked better. Didn't have to shave anything off on mine.
Think I may have to do the same. It's worryingly difficult to fold the head in on mine. I'm terrified something is going to snap, and I've had terrible luck finding a lot of TF stuff around here. I'm not confident I can find a second one of these.
I know BBTS is allowing returns and repreorder for September expected date. I have heard Hasbro is also replacing him. I did another preorder and kept the one I have. Done the trimming and shoulder swap and going to do battle damage removal. Figured if I messed it up another would be on the way later. But so far so good.
The ingenuity of transformers gets more advanced as they get updated to look more like their animated counter parts and to make them more posable compared to the stiff unposable g1 toys
Missed out on Kingdom Galvatron. Just couldn’t find him anywhere. Luckily, I found TWO Legacy Galvatrons today at Target. So happy. Thank you Emgo316 for showing me how to transform it correctly without breaking it.
Most of the time, the instructions are confusing.
Its been 7 years, and you're still making the content I loved as a child. Thank you.
7? It's 11
@@LiterallyEveryone217 Im saying 7 cause i havent watched his channel in 7 years, not the total time hes been making videos.
@@hiwrld8216 oh sorry
@@LiterallyEveryone217 No worries :)
JUST GOT THIS FIGURE TODAY AND YOUR VIDEOS WAS AN INCREDIBLE HELP WITH THE TRANSFORMATION ❤
Just a shout-out that this is still paying dividends, as I've had this guy for years but absolutely COULD NOT remember one crucial step! As always, thanks for all you do, man!
I remember getting the original Galvatron figure as a kid back in the 80's. Galvatron is a b/a I love this figure
Thanks mate, had the original day back in the day, now i know how my Dad fellt when he was trying to figure out to transform it.
I'm 51 and i still love your channel a lot. One of my favourites.
I can never overstate how useful your 'Just Transform' videos are 👏👍
Appreciate these videos. First time transforming him back to robot mode. The chest was stuck and I could not get the head out. Felt like it would break pulling it apart. But the video reassured me I was doing it right. I did notice you didn't have it fully in latch. So it was a smooth and easy pull for the vid. Sneaky.
ive got the opperset i cant get the head in to transform him
I got the head stuck I’m screwed
Dude i had that issue for a while, just gotta keep at it as frustrating as it is
It’s gonna take me a whole day to transform Galvatron lol
I can’t get my head to go into the cavity. It stops part way. I think it’s cause of the tab on the back of the neck piece
yeah me either
I decided to search because was having issues on that too... now I see it's a defect on some models :|
I wasn't able to get this guy until the legacy release. He's great. My copy seems to have some fitment issues with the chestplate and arms in alt mode. This video helped me with that.thanks
I had a heck of a time getting his shoulder pieces to tab into the bottom of his chest plate to complete the transformation
there was a small burr on mine, shave off with a razor/ x-acto knife or use fine -grain sandpaper
Same here.
This.
Same here. One side seemed like it wouldn't reach as far, so I started with that side instead and it worked better. Didn't have to shave anything off on mine.
cannot believe i had to google how to do this toy... however, thank you for making this because it was about to just go back in a box!
STUDIO 86 Galvatron!!!!
That's what we want!!!
A Movie/Season 3 accurate version of Galvy! ......that doesn't cost over $135 heh, heh
Had to shave just a very small portion off of the tab behind the neck collar to get the head to fold all the way in.
Yikes
You are not the only one, the torso tabs were all just a tiny bit too thick
Think I may have to do the same. It's worryingly difficult to fold the head in on mine. I'm terrified something is going to snap, and I've had terrible luck finding a lot of TF stuff around here. I'm not confident I can find a second one of these.
I know BBTS is allowing returns and repreorder for September expected date. I have heard Hasbro is also replacing him. I did another preorder and kept the one I have. Done the trimming and shoulder swap and going to do battle damage removal. Figured if I messed it up another would be on the way later. But so far so good.
Same. Just a tiny bit was enough.
when did transfoprmers get so complicated lol
I love this figure, just pre-ordered him to go along with my cyclonus and scourge🤘
One week till this arrives
Dude thank you, cuz I was catching hell trying to transform mines
Esta figura está bien nítida. Gracias acabo de transformar la mía.
"Here's a hint!"
Also I see a few opportunities for Reprolabels/Toyhax to fill out some more details
Sometimes I grab the back legs and hold it like a gun
No laser pistol mode?
Lol
No that was an unnecessary feature to the g1 galvatron since he wasn't actually used as a pistol like megatron was in the annimation series.
@@michaelreyes7641unless you read the comics....
A+++++++ breakdown !! Thanks
Thank you this helped a lot
In transforming him back from gun mode to robot mode the front of the cannon that makes his back won't open and is stuck, how to fix this?
Same
I didn't know now I do I'm only 8 and now can transform it myself
I wish I would have it.. soon... 😢
what is this music called on the background of the video??
Where is the transformation for pistol mode?
There is no official pistol mode
Hey English have you seen the new masterpiece galvatron and mpm galvatron leaks?
What masterpiece galvatron??
@@Newjourney14 the new mpm and mp galvatron look it up
@@Mcizmael you seem to be mistaken. You must be referring to UT Nero and FansToys Sovereign, neither of which are official masterpiece releases.
Does anyone affix his weapon anywhere
why did the transformation need to be so complicated?
I like more complicated transformation because I don’t get bored
The ingenuity of transformers gets more advanced as they get updated to look more like their animated counter parts and to make them more posable compared to the stiff unposable g1 toys
@@michaelreyes7641 oh yes. tho the original 86 Galvatron did have more articulation than most G1 era ones
@@EsotericFood plus g1 galvatron was way to large
@@michaelreyes7641 agreed; however maybe they felt compelled to have a Decepticon counterpart to Ultra Magnus, size-wise
I wanted to watch this video because when I bought this figure on Amazon it came with magnus’s instructions and not galvitron’s 🤦♂️
Not one step of transforming him was enjoyable. Blaster mode is nothing special anyhow. Will be staying in robot mode
I use your shit as instructions XD every new bot I get
So glad I can refer back to this. He’s awesome as s figure but sucks as a cannon!
Wait 3 Hours and just 4 comments? Whats happening?, anyway good video.
this isn't his review. I don't think these videos get as many views/comments.
@@fullmetal_3961 well that makes some sense
Third
Lame