You likely already know this, but the adapter the company will send you if you garage is not compatible (took 4 business days) is a wireless remote itself, that connects directly to the brown and blue wire.
Bravo and thank you for this solution! Instead of waiting for the company to send me an adapter, I used this work-around with an existing, paired remote.
hello.... Amazon shows that RSG100 Smart WIFI garage door opener does not required a hub, you stating that it does required one. I cannot debate whether agree or disagree, since i haven't installed it. my door takes 10 to 14 weeks to arrived. I have already pass the return point with Amazon. OVER all it is a nice review. Thanks Tom
Hi Ray, thank you. Based on my limited research, a great deal depends on ones Wi-Fi router/AP. The reason I need a hub is because of my router and that I am using Apple Homekit. I do not believe one will need a hub with Google assistant, nor Alexa.
So I got everything setup and am able to use the app to trigger the door to open and close after my soldering job but when using Siri when my phone is locked, I am getting a prompt to unlock phone to use the shortcut I setup to make this work. Any idea on how to fix this?
I didn't open up my remote yet to see how easy it is to tell which terminals to solder to. I have an incompatible liftmaster w/ a yellow train button and not sure if I want to wait on refoss to send adapter. How did you determine the terminals? Was it visible or use continuity when button is pressed?
In my case, I located the programmed button on the circuit, then took a flat screwdriver and shorted two of the four button contacts. Shorting the contacts bypassed the button and that's the point of the test. When shorted, I could see the remote led blinking, meaning, I found the needed contacts.
Is there any feature in the app which will notify you when the garage door is opened for a certain amount of time? For example, if the garage door is left open for more than 5 minutes, I'll get an alert.
Hi Tom, thanks for the review. Did you get the RSG100HK model or just the RSG100? You clearly hooked into apple homekit, but on your box it only showed RSG100.
Hi Eric. Well spotted, I did not notice that. You are right, mine does work with Apple HomeKit and the box did state that it is the RSG100. Looking at the order details, it says RSG100HK.
@@TomsTechVerdict Nice one. I'm sure it's just a way for them to reduce costs. The RSG100 is current $40 cad vs $60 cad for the homekit version, so I almost got caught. Thanks for double checking!
If you use the original app, other users would need to be logged in as well. If you use Apple Homekit and have a family share setup, all other users will be notified automatically.
If your garage opener motor is compatible, that is how this kit is intended to be connected. But if it is not compatible, as I mentioned at the start of the video, this is one way it can be done.
I don't know what I did wrong. It's clicking but not opening. I can open it manually. On meross app mesg pops up "garage open action failed" and on eHome life it just clicks and nothing.
Hmm, odd. Never experienced that glitch. Check your door sensor, make sure it is correctly aligned. Misalignment can cause false reports in HomeKit. If it is correctly aligned, try to remove the device from HomeKit, then reboot your phone and re-add.
![[Live] : ONE 168 วันนี้!! "โจนาธาน vs ซุปเปอร์เล็ก"](http://i.ytimg.com/vi/0jIN65KgJsI/mqdefault.jpg)
My garage opener wasn't compatible and this method worked! Thank you!
Hi Rob. Glad you found this video useful. You are very welcome.
You likely already know this, but the adapter the company will send you if you garage is not compatible (took 4 business days) is a wireless remote itself, that connects directly to the brown and blue wire.
Bravo and thank you for this solution! Instead of waiting for the company to send me an adapter, I used this work-around with an existing, paired remote.
Thank you. Glad you found it helpful.
Hi Tom can’t thank you enough,it works perfectly,kept being told nothing works with my 3 button sommer garage door you proved them wrong👍
Hi Alfie. I am glad you found this video useful.
You saved my day! Thank you so much!
My pleasure x)
hello.... Amazon shows that RSG100 Smart WIFI garage door opener does not required a hub, you stating that it does required one. I cannot debate whether agree or disagree, since i haven't installed it. my door takes 10 to 14 weeks to arrived. I have already pass the return point with Amazon. OVER all it is a nice review. Thanks Tom
Hi Ray, thank you. Based on my limited research, a great deal depends on ones Wi-Fi router/AP. The reason I need a hub is because of my router and that I am using Apple Homekit. I do not believe one will need a hub with Google assistant, nor Alexa.
Thanks very helpfull..... Good job!
great video. worked wonders. thanks.
nice review!
Thanks Dave
So I got everything setup and am able to use the app to trigger the door to open and close after my soldering job but when using Siri when my phone is locked, I am getting a prompt to unlock phone to use the shortcut I setup to make this work. Any idea on how to fix this?
I didn't open up my remote yet to see how easy it is to tell which terminals to solder to. I have an incompatible liftmaster w/ a yellow train button and not sure if I want to wait on refoss to send adapter. How did you determine the terminals? Was it visible or use continuity when button is pressed?
In my case, I located the programmed button on the circuit, then took a flat screwdriver and shorted two of the four button contacts. Shorting the contacts bypassed the button and that's the point of the test. When shorted, I could see the remote led blinking, meaning, I found the needed contacts.
Is there any feature in the app which will notify you when the garage door is opened for a certain amount of time? For example, if the garage door is left open for more than 5 minutes, I'll get an alert.
Hi Tom, thanks for the review. Did you get the RSG100HK model or just the RSG100? You clearly hooked into apple homekit, but on your box it only showed RSG100.
Hi Eric. Well spotted, I did not notice that. You are right, mine does work with Apple HomeKit and the box did state that it is the RSG100. Looking at the order details, it says RSG100HK.
@@TomsTechVerdict Nice one. I'm sure it's just a way for them to reduce costs. The RSG100 is current $40 cad vs $60 cad for the homekit version, so I almost got caught. Thanks for double checking!
How to connect with nice robus 600
It’s like how you did it but not how you others could do it
If i put this in the house, does everyone that have the app get notified if a garage opens?
If you use the original app, other users would need to be logged in as well. If you use Apple Homekit and have a family share setup, all other users will be notified automatically.
Why can’t you attach those wires to the garage terminals on the machine itself .. instead of the remote .?
If your garage opener motor is compatible, that is how this kit is intended to be connected. But if it is not compatible, as I mentioned at the start of the video, this is one way it can be done.
I don't know what I did wrong. It's clicking but not opening. I can open it manually. On meross app mesg pops up "garage open action failed" and on eHome life it just clicks and nothing.
Hmm, odd. Never experienced that glitch. Check your door sensor, make sure it is correctly aligned. Misalignment can cause false reports in HomeKit. If it is correctly aligned, try to remove the device from HomeKit, then reboot your phone and re-add.
What the hell are you doing??? You mean I have to do all that stupid work just for that?? I order this because I lost my remotes
如果它不兼容，卖家将向您发送遥控器配件。您无需自行修改
God dammit, mute the "Hey Siri" phrases. It's god damned annoying to have my Homepods react every time.