@@dcshotcrete Linus Tech Tips has a podcast called the WAN show and on the one he made on the 12th he talked about shotchrete on his pool at around 50:00
Spraying concrete without a good mask and safety's. Best gain. Couple months and you out off work for good. The how you perform you job. Sometimes more important the the job its self. ; )
If you make the pool dead smooth the next step (being waterproofing and tiles) won't bond as well as they should, and risk lifting after a couple of years. So a quick wood float or other item to make the pool surface roughness around a 600 grit finish will ensure the bonding products have the best chance to adhere and stay put over the life of the pool.
@@kmobthm Concrete estimator apps are a godsend . How thick as a minimum ? 70 mm concrete coverage over steel mesh , that way you reduce/eliminate the chance of rust spots leaching through from tie wire. How thick Max ? Ive sprayed walls and benches 3 FT thick. Depends on the design of the job and engineers requirements. Pro tip#1 = Don't Cowboy any jobs. Always follow what's on the plans and all engineering directives. Keep your quality standards high and subject to continual improvement. Stay hungry to learn!
@@piggysleft no we have stuff called a slick pack that we put in the hose before the concrete get put in the hopper and it helps the mud glide through the hose better and we put it in the dirt,rocks,or grass because it’s bio degradable not in the pool.
@@connorcalobeer7472 he didn’t prime out in the pool , he was filling up two pier holes that had a little water in them. The operator made the slump 6-7inch slump then slow fed it through the line then sprays at 6inch slump.
Awesome job fellas
Glad you enjoyed it
that is incredibly cool
Thankyou !
You guys make it look easy.
🤣🤣🤣🤣 no they don’t
They sure do, If this was American they’d have 10 guys on the team going twice as slow.
@@piggysleft that’s funny cuz we shoot an 80 pool before 7:00 usually with only 5 people
@@piggysleft 😐
Linus Tech tips brought me here
How so ?😁
@@dcshotcrete Linus Tech Tips has a podcast called the WAN show and on the one he made on the 12th he talked about shotchrete on his pool at around 50:00
@@dcshotcrete th-cam.com/video/QV-7YZMee80/w-d-xo.html This is where they talked about Shotcrete
The best way to build a pool...lasts forever...
Spraying concrete without a good mask and safety's. Best gain. Couple months and you out off work for good. The how you perform you job. Sometimes more important the the job its self. ; )
2 top cutters??
How did the last man get out without leaving a trace ... ?
I'm amazed how fast these workers can move?
Thankyou Kimo, Ill let the guys know.
K/h KPH or Mi/h MPH
So this is what Linus was talking about
yup, Im the lucky guy at the fun end of the hose.
Nice!! What’s after this, like how do you smooth out the little rough holes and stuff?
If you make the pool dead smooth the next step (being waterproofing and tiles) won't bond as well as they should, and risk lifting after a couple of years. So a quick wood float or other item to make the pool surface roughness around a 600 grit finish will ensure the bonding products have the best chance to adhere and stay put over the life of the pool.
Plaster.
Assistindo do Brasil
Howmuch is the concret ratio
Looks like #4 reinforcement. 👍👍
Correct , standard size in Aus.
I wish Cali would adopt that sandard
How does the concrete stay up on the walls and not slide down ?also how thick are the walls ?
James , its shotcrete ( pool mix ) so its a little stickier than slab mix along with the additional chemicals used.
Walls were around 8 inches thick.
@@dcshotcrete hey mate how do you get out?
@@matthewleonardi247 , I get out at the first place I start spraying because it will be firm enough to climb out.
What brand/unit do you have as your shotcrete machine?
The pump being used here is a Transcrete p60
@@dcshotcrete That's very helpful. Thank you.
I imagine that breathing shotchete is not good for the lungs. The operator needs some PPE.
How many yards you guys used ?
27 yards
I’m trying to figure out how much I need to use , I have a 18 x 36 , how thick do you go ?
@@piggysleft Lucky guess !
@@kmobthm Concrete estimator apps are a godsend . How thick as a minimum ?
70 mm concrete coverage over steel mesh , that way you reduce/eliminate the chance of rust spots leaching through from tie wire.
How thick Max ? Ive sprayed walls and benches 3 FT thick.
Depends on the design of the job and engineers requirements.
Pro tip#1 = Don't Cowboy any jobs.
Always follow what's on the plans and all engineering directives.
Keep your quality standards high and subject to continual improvement. Stay hungry to learn!
@Kieran Nally thx bud.
Few questions, What slump is used? and how do you stop the tops from sagging?
4 inch slump. Spray closer.
Really a 4 slump? I do 4 and 5 for driveways and floors. Interesting
Just curious never seen a pool concrete done. Very cool
I cant believe at 4 it still sets and doesnt sag on walls but ill have to try it one day
Just the way I was taught.@@erictaylor6714
Why the hell would you prime out in the pool
By prime out you mean first bit of concrete coming through the hose ?
@@piggysleft no we have stuff called a slick pack that we put in the hose before the concrete get put in the hopper and it helps the mud glide through the hose better and we put it in the dirt,rocks,or grass because it’s bio degradable not in the pool.
@@connorcalobeer7472 he didn’t prime out in the pool , he was filling up two pier holes that had a little water in them.
The operator made the slump 6-7inch slump then slow fed it through the line then sprays at 6inch slump.
@@piggysleft ok that makes more sense lol
@@connorcalobeer7472 You seemed a little agro at the start. Maybe an apology?
Are there American born workers or only Mexicans?
Wouldn't have a clue as we're an Australian team.
@@dcshotcrete
Im sorry that I wrote Americans when you are actually Australians.
Ive sprayed in America as well bud its all good !@@paulcohen1555
Much rather work gunite than this.