How to Test Common Household Batteries With A Multimeter
ฝัง
- เผยแพร่เมื่อ 21 ส.ค. 2023
- In this video I show you how to test common household batteries using a digital multimeter.
Buy a Multimeter here - amzn.to/3OLJLF9
(Amazon Affiliate Link)
• Subscribe to my Main Channel: bit.ly/SubscribeToTheFixer
• Facebook: / thefixeronyoutube
• Instagram: / thefixeryoutube
• TikTok: / thefixeronyoutube
• Website: www.thefixerhomerepair.com
• Patreon: / thefixer
• Amazon store: www.amazon.com/shop/thefixer
*As an amazon affiliate I earn commission on qualifying purchases
DISCLAIMER:
This video and description contains affiliate links, which means that if you click on one of the product links and make a purchase, I will receive a small commission at no extra cost to you. This helps support this channel and allows me to continue to make videos like this. Thank you for your support!
Videos produced by The Fixer are provided for informational purposes only. All material provided within this video is for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Please use all safety precautions while following any instructions or concepts provided by this video. Viewers must be aware that by doing projects on their homes they are doing it at their own risk and The Fixer cannot be held liable if they cause any damage to their homes. It is the sole responsibility of the viewer to educate themselves on their local codes and regulations before undertaking any sort of project. Always have safety in mind and have fun! - แนวปฏิบัติและการใช้ชีวิต
Buy a Multimeter here - amzn.to/3OLJLF9 (Affiliate link)
Subscribe to my channel- bit.ly/Fixer2
Thanks for watching! 😃
Thanks!
Thank you very much it's exactly the multimeter that I needed to learn how to check my batteries on...
Thank you that’s what I needed just so I can use my dad’s multimeter.
Good introduction video using a DMM.
You might demonstrate what happens if the test leads are reversed. You might also address possible bad readings (e.g., resistance) and hazards (e.g., reading higher voltages) if the lead probe tips are touched with fingers during testing.
Thanks for sharing 👍
Informative, useful👏🌟👍
Thanks. I had mine on the wrong setting!
Helpful. Didn’t realize bad batteries still had so much power still there
Oh, yes. The low voltage AA (1.19 VDC) might still power some devices (e.g., a flashlight with an incandescent bulb). Most electronic devices will not function correctly.
Yes that's why it is also important to recycle them properly.
Is the volt reading independent from charge? On the rechargeable drill ones for example, will it show the same volt reading regardless if its charged all the way or not?
Two notes:
1) You really should test with an inline load (such as a small resistor). Without a load it is possible to measure a good voltage in an actually dead battery.
2) While it is ideal to put the positive and negative on the correct ends, getting it wrong will only change the sign of the output. So for example -3V instead of 3V. As long as you understand that it doesn't really matter which way you measure.
Same meter but my brand new AAA reads 235. Not 2.35. Two hundred thirty-five. No decimal places on the DCV20 setting just like yours. All my batteries are like this.
Solved: Bad battery powering the multimeter.
When battery is in good condition,, why it shows more than its voltage. For an example, 9V battery shows 9.64V.
These batteries weren't tested with a load on them, so they really may not be as good as you truly need them...
😯🤔😬
To make it more clear, it would've been helpful to show what the proper voltage for each battery should be by pointing it out where it's written on the battery. "This battery is rated at 1.5 volts (point to it on battery), and when we check it, it reads... (etc.)"