DIY는 항상 만들면서 많은 변수를 맞이 하는것 같습니다. 다시는 하지 말아야지 하면서 또 만들게 되는것은 자신만의 색깔을 갖는 보드의 매력때문입니다. 그리고 이번 비디오 촬영부터 카메라를 바꿨습니다. DIY always seems to meet many variables while making. I've thought that I won't do DIY again, but I did it again. Because it is obviously attractive that I making an E-board with my own characteristics. And I changed the camera from this video shoot. Enjoy it :)
You know, being a 15 year old without a job, I can’t afford any of this stuff. Your channel is like a way for me to experience this without spending anything! Your time and effort put into every video is beautiful! Thank you!
@@nickp9731 If you're 15 and don't have any financial responsibilities then you should be able to scrape $2.000 in a month through a part time job in the united states. But yeah, its a little different for people who have kids or gotta pay rent or a mortgage.
Andri Egilsson brother youre wayyyy off. Anywhere outside of the US, there is no way you could make 2k in a month as a part time employee. I live in the EU, and the average pay for a student part timer is 5€/hour. In most of the world you most likely wont be able to earn a 1000 in a month at a part time job. US isnt the whole world u know
Thank you for watching :) This is my opinion that a normal longboard truck can move from the front and back, up and down. But this truck can only work up and down, so I think it'll give me an advantage from the wobbles. But I'll have to ride it to know.
I love the new board and It looks awesome but having all of that weight in the back is gonna cause you to get speed wobble more easily. I reccomend putting the components in the middle or somewhere else besides all in the back. Keep up the great work!
@@KAMiJUINs I have a similar setup on a different deck. Battery is in the center and on top of the deck, ESC in the back, hub motors. Because the motors are so heavy, the weight is still concentrated in the back. Ideally, a flat battery pack would be mounted tohether with the ESC under the deck like Kaly NYC does, but only works with big wheels/riser pads. Was thinking abut putting the battery the same way you did, but on the front of the deck. Would probably look ugly though. I'd suggest you try going a few miles in reverse and see if the weight balance is better that way
4:37 This note about bearing size differences is very different. I was about to purchase some skateboard trucks but trying to fit the wheels (bearings fixed inside) but couldn't be side it's smaller, meant I couldn't get the truck unless I went back to buy different bearings.
Hey kami! That is a beautiful build - well done! I worry that it will be too low to the ground with those wheels and I think you should consider upgrading to the cloud wheels which are 120mm in diameter but a similar style to the MBS wheels you have! The board is going to have a lot of torque with those small wheels you have!
Hi, Lee :) welcome mate~ and thank you for your comment. Yes, it's something true. Deck's position is quite low from the ground. And I think it looks lower to make a film on the carpet. I'll test ride it carefully first then follow you if it has a problem. THANKS :)
WoW, amazing work! Can't wait to see it in action. You should build a little trailer so you can pull your dog instead of carrying him when you ride. With the flexing of the deck, does it hit the ground or are you putting some riser pads? Awesome video, Great job, thank you for sharing.
전체적인 화이트 컨셉이 정말 이쁘네요 ㅎㅎ 다만 배터리와 엔클로저가 뒤에 몰려있어 무게가 뒤에 많이 쏠리지 않을까 걱정이 되긴 합니다. 혹시나 3D프린터로 출력한 엔클로저가 필요하시면 연락주세요...! 더 가볍고 견고하게 제작할 수 있을것같네요 ㅎㅎ 치수만 알려주시면 모델링해서 바로 출력가능합니다.
There is a formula that calculates the distance that can be ride by battery capacity. So I can expect some :) And the extra battery replacement was designed easily. (It is also a good way to install a battery gauge if you need it.)
Yes for sure. I thought you had some special bearings lol. I am making my build now so excited to ride it soon. :). Thanks again bro for your videos and help.
From what I’ve heard, a truck hangers length only accounts for stability up until a certain point where it caps off... relatively early, maybe around 220ish mm, and then you need to rely on skill and wheel width. what I would focus on is wider wheels (not diameter of the wheel, just how wide) the contact patch of those wheels your currently using is incredibly small and probably accounts for any stability issues you may have. If it’s an on-road board, try to sling the box holding the batteries and electronics either underneath, or in the middle of your two feet like most do on trampoline boards. Oooooooh and I would love to see you make an li-ion cell pack instead of these brick lipos
Weight distribution plays a major role in speed wobbles. The more even across the two trucks, the better. So having everything in the rear is probably not going to give you very good handling at higher speeds.
I don't know because I haven't ridden it yet. And I will try to feel more about your opinions when riding then let you know. I use many boards now, So I'm more comfortable using the Lipo batteries. Thank you for your comments :)
DIY는 항상 만들면서 많은 변수를 맞이 하는것 같습니다. 다시는 하지 말아야지 하면서 또 만들게 되는것은 자신만의 색깔을 갖는 보드의 매력때문입니다. 그리고 이번 비디오 촬영부터 카메라를 바꿨습니다.
DIY always seems to meet many variables while making. I've thought that I won't do DIY again, but I did it again. Because it is obviously attractive that I making an E-board with my own characteristics. And I changed the camera from this video shoot. Enjoy it :)
역시나 뭔가 영상느낌이 더 감성적인(?) 색감으로 바뀌었다 했더니..예전에도 훌륭했지만 색감이 보기 편해진것 같아요.
이번 영상도 작업하시느라 고생많으셨을것 같네요 선 좋아요 누르고 마저 영상 보러갑니다~
알아주셔서 감사합니다 흑흑 :)
You know, being a 15 year old without a job, I can’t afford any of this stuff. Your channel is like a way for me to experience this without spending anything! Your time and effort put into every video is beautiful! Thank you!
Thank you so much for saying that and watch :)
Well you could get a part time job for like a month and you could afford this board.
@@andriegilsson6623 what part time job do you have i have a full time job and i couldnt get this in a month let alone 3
@@nickp9731 If you're 15 and don't have any financial responsibilities then you should be able to scrape $2.000 in a month through a part time job in the united states. But yeah, its a little different for people who have kids or gotta pay rent or a mortgage.
Andri Egilsson brother youre wayyyy off. Anywhere outside of the US, there is no way you could make 2k in a month as a part time employee. I live in the EU, and the average pay for a student part timer is 5€/hour. In most of the world you most likely wont be able to earn a 1000 in a month at a part time job. US isnt the whole world u know
I love the artistry of the you showing us how you build the board.. great work!!
Thank you for saying and watching :)
Watching you is like watching an artist at work. Can’t wait to see the next video of this board in action. 🔥🔥💯🤙🏼🤙🏼
Thank you at all times :)I hope the weather will help.
Please don't ever stop doing DIY-builds. Your work is beautiful and super inspirational!
Thank you :) Even though it is hard, I have the greatest sense of achievement when I do DIY.
I'm in love with that board, It looks so clean!
Thank you for watching :)
Rebuilding something to suit new needs is one of the great things about a diy build. It's YOUR baby.
I agree with you :) Thank you for watching~
My favorite build yet, love it man!!!
Thank you for saying that :)
great as always Kami
Thank you at all times :)
WoW!
Love the classy "gloss" look!
Nice build as always!
// Robin
Hi :) my friend!!! Thank you for coming. And Say hello to Ralph.
So clean build
Thanks, friend :)
9:38 the vent hole for the radiator is perfect!
love these videos
Thank you for watching :)
Love your videos and your ideas!!
Hi, My Czech Republic mate :)
Thank you at all times~
What a beauty!
Hey, Metti :) Yes, It's beauty enough in my eyes lol
I will always pray for your nice adventure.
looks beautiful as always, especially the white theme. Guess no muddy roads then :)
Thank you for coming :)
love the design, it has given me some good ideas
Thank you for watching :) glad to makes it help you.
Great vid looks cool
Thank you for come again :) I am also watching your video well.
Dude your boards are awesome
Thank you so~much :)
great video! cant wait to see it runs, I bet with that having a wider wheel base can cause you a lot of speed wobbles.
Thank you for watching :) This is my opinion that a normal longboard truck can move from the front and back, up and down. But this truck can only work up and down, so I think it'll give me an advantage from the wobbles. But I'll have to ride it to know.
영상 다봣는데 제일 빌드퀄리티 높은거같아요 대박이네요~
넵ㅎ 감사합니다 :)
I love the new board and It looks awesome but having all of that weight in the back is gonna cause you to get speed wobble more easily. I reccomend putting the components in the middle or somewhere else besides all in the back. Keep up the great work!
Thank you for your comment and watch :) I want to try in many ways.
@@KAMiJUINs I have a similar setup on a different deck. Battery is in the center and on top of the deck, ESC in the back, hub motors. Because the motors are so heavy, the weight is still concentrated in the back. Ideally, a flat battery pack would be mounted tohether with the ESC under the deck like Kaly NYC does, but only works with big wheels/riser pads. Was thinking abut putting the battery the same way you did, but on the front of the deck. Would probably look ugly though. I'd suggest you try going a few miles in reverse and see if the weight balance is better that way
Wow🤩고퀄리티 영상 멋지네요. 오늘도 열심히 함께하는 까미 hahaha
알아봐주셔서 감사합니다 :) 까미는 항상 열심히 함께해요.ㅋㅋㅋ
4:37 This note about bearing size differences is very different. I was about to purchase some skateboard trucks but trying to fit the wheels (bearings fixed inside) but couldn't be side it's smaller, meant I couldn't get the truck unless I went back to buy different bearings.
Nice work man.
Thank you for watching :)
Wish to have one of those😯
Cant wait for its specs and
on how it handles bro..
Thank you :) I hope the weather will help.
Great
Thank you for watching :)
Hey kami! That is a beautiful build - well done! I worry that it will be too low to the ground with those wheels and I think you should consider upgrading to the cloud wheels which are 120mm in diameter but a similar style to the MBS wheels you have! The board is going to have a lot of torque with those small wheels you have!
Hi, Lee :) welcome mate~ and thank you for your comment.
Yes, it's something true. Deck's position is quite low from the ground. And I think it looks lower to make a film on the carpet.
I'll test ride it carefully first then follow you if it has a problem. THANKS :)
참 실력이 좋으십니다 저도 너무 만들어 보고싶디만 환경상 못하고 있는데 정말 영상 즐겁게 보았습니다 감사해요.
네 시청 감사합니다 :)
WoW, amazing work! Can't wait to see it in action. You should build a little trailer so you can pull your dog instead of carrying him when you ride. With the flexing of the deck, does it hit the ground or are you putting some riser pads? Awesome video, Great job, thank you for sharing.
Thank you for always being interested :)
How did you fit the larger bearings then? Did you drill out the bearing set in the wheel to 9.5mm?
If you look at the video carefully, it is mentioned there.
It used an inner diameter 9.525mm bearing with an outer diameter of 22mm
전 버젼도 이뻣는데 문제점 개선하고 색도 흰색으로 하니까 엄청이쁘네요! 근데 트럭이 낮아서 오프로드는 돌에 많이 긁힐거같네여...
얼른 도로 상태 괜찮아져서 시험라이딩 하시는 영상 보고싶어요! 요즘 날씨가 오락가락하던데 건강 조심하세요~
감사합니다 :) 낮긴한데 오프로드에서 탈건아니라서 ㅎㅎ... 날좀풀리면 타 봐야 알것 같아요.
치킨땡겨님도 건강조심하세요~
Would love to see this board in action! 🤙🏼
Thank you :) I hope the weather will help.
Excelente trabajo quedó excelente..... Es un skate de perfil muy bajo!! Obliga a colocar la electrónica encima de el !!! 💪👍👍👍🛹
Gracias por ver :)
2:45 KAMi is so fluffy!
후덕 까미... 졸귀~~~^^
감사합니다 ㅎㅎ:)
How did u get MBS wheels to fit on 12mm axle?
This is the 9.5mm axle and there's more detail in the video :) Would you look at it again?
How is this board different than the Trampa carving boards you can buy ready from them?
Thank you for watching :)It used a truck wider than Trampa Carver Board. Each of the necessary parts was ordered from their website.
Same from canada snow snow snow grrr
Thank you for watching :) Let's pray that the weather will get better.
Kami. You should put the SR foamies on that board! They ride Beautiful and you will get 10mm more ground Clarence.
Thank you :) let me think about it~
앏비노 비스트.... 대박이네요 ... 까미 좀 더 찐거 같은...
감사합니다 :) 까미는 겨울이라서 털이 쪘어요 ㅋ
Nicce,..
Thanks :)
NİCE JOB!
Thank you for watching :)
Really nice work but still prefur the Bustin board 👌🙏
Maybe many people think the same as you. Because of the big box lol. Thank you for watching and coming~
Do you have a link for the motor mounts you have used?
www.trampaboards.com/original-street-carver-motor-mount-with-motor-axle-support-kit--twin-p-27563.html
check this out~
선좋아요 후감상
감사해유~ 준희님 :) 바이러스 조심하시구요
Красиво получилось.
Я ценю то, что ты сделал :)
너무 이뻐요~
감사합니다 :)
Nice work, for You i'm start to Made my eléctric skateboard, thank You, i'm from México city
No problem :) and Thank you for watching ~
보드도 예쁘고 멋있네요 넘어지고 보드 폐기되고 고민중이네요 곧 있으면 시즌 오픈이니까 보드 살까 말까 고민중이네요 까미 털 찐거 귀엽네요 ㅎㅎㅎ
시청 감사합니다 :) 봄되면 털 잘라야죠 ㅋ
다음에도 좋은영상 부탁드립니다😊
Not my style, all white, but I love that you committed to it! Keep up the great work!
Thank you for watching :)
전체적인 화이트 컨셉이 정말 이쁘네요 ㅎㅎ 다만 배터리와 엔클로저가 뒤에 몰려있어 무게가 뒤에 많이 쏠리지 않을까 걱정이 되긴 합니다. 혹시나 3D프린터로 출력한 엔클로저가 필요하시면 연락주세요...! 더 가볍고 견고하게 제작할 수 있을것같네요 ㅎㅎ 치수만 알려주시면 모델링해서 바로 출력가능합니다.
말씀 정말 감사해요 :) 엔클로져무게가 발란스를 망가트릴정도로 무겁진 않은데 타봐야 더 정확히 알것 같아요~
Nice Vid!
How do you know how much power do you left in the batteries during the ride?
Thanks
There is a formula that calculates the distance that can be ride by battery capacity. So I can expect some :)
And the extra battery replacement was designed easily.
(It is also a good way to install a battery gauge if you need it.)
@@KAMiJUINs Thanks. So if I understood right, you don't have any live data monitor about the capacity of the batteries during the ride?
Hey man how did you fit the bearings into the MBS wheels. It's so tight the ones from Tampa the 9.525x22.225 ones.
Yes it was a bit. I used a heat gun and a rubber hammer to fit.
Ahh got it. I was wondering how you got it in so easy with your video. Lol
It's always easy to doing something in videos. Because it doesn't need to record mistakes. haha :) Thank you for watching~
Yes for sure. I thought you had some special bearings lol. I am making my build now so excited to ride it soon. :). Thanks again bro for your videos and help.
What size bolts did you use to attach trucks to the board?
M5 x 25mm HEX Head SHANKED Bolt
trampaboards.com/m5-x-25mm-hex-head-shanked-bolt--marine-grade-stainless-steel-with-locking-paste-p-417.html
Thanks again
I just put my order with Tampa to build similar to your build :)감사합니다
How long does the battery last? Been watching your channel for awhile and I still wondering that lol.
The battery combination has a range of about 10 miles.
Класс, хочу повторить!
Спасибо, что помог :)
역시 멋집니다! 그런데 낮아서 아래가 쓸릴까 걱정되네요.
언제나 그렇듯 타봐야 알것같아요 :) 감사합니다.
와.. 화이트 감성
지금 생각으로는 다신 못할것 같아요 ㅜ.ㅜ
손재주 정말 대단하신거 같아요.
혹시 전공이?
영상 잘 보고 가요
시청감사합니다~ (디자인입니다)
Love that enclosure, do you have the plans for sharing?
Thank you for watching :)
But I didn't design it and just built it. So it's not enough to share.
Thanks for sharing your videos. Keep it up!
Bonjour de la France. Elle est vraiment superbe votre board. C'est possible d'avoir la même pour Noël ?? 😂 😂 😂
Gratuit? Merci d'avoir regardé :)
@@KAMiJUINs petit problème de traduction 😉. Je n'ai pas dit gratuit. Je disais que je voulais la même pour Noël 😁🎄
@@davidmirian4029 Je l'ai obtenu
Where can i buy this wheels ?
Check this out!
www.amazon.com/-/ko/gp/product/B015GJN0BA/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
From what I’ve heard, a truck hangers length only accounts for stability up until a certain point where it caps off... relatively early, maybe around 220ish mm, and then you need to rely on skill and wheel width. what I would focus on is wider wheels (not diameter of the wheel, just how wide) the contact patch of those wheels your currently using is incredibly small and probably accounts for any stability issues you may have. If it’s an on-road board, try to sling the box holding the batteries and electronics either underneath, or in the middle of your two feet like most do on trampoline boards. Oooooooh and I would love to see you make an li-ion cell pack instead of these brick lipos
Weight distribution plays a major role in speed wobbles. The more even across the two trucks, the better. So having everything in the rear is probably not going to give you very good handling at higher speeds.
I don't know because I haven't ridden it yet. And I will try to feel more about your opinions when riding then let you know.
I use many boards now, So I'm more comfortable using the Lipo batteries.
Thank you for your comments :)
KAMi JUINs - sounds good, can’t wait for an update!
🤪🤪🤪😜👊👊👊👍👍
Always Welcome :)
Battery and reciever box looks too big, I recommend you find new way, for example, under the deck
Thank you for your comment. I want to try in many ways.
I would buy it but I don’t have money.Feels bad man
sorry for that man
@@KAMiJUINs I could try to build one but In a budget.That could also work
와 진짜 이분은.. 회사하나 설립하시죠?
시청 감사해요 :)
You think you can build me an enclosure like that.
Should try~ Thank you for watching :)
하이
Hi :)
board is great but the wheels are way too small
Thank you for watching :) and I rode it for a second and it wasn't bad.
Can you sell me the bustin beck
I think, The shipping cost will be as much as the deck price.
That looks dangerously low..
I need to test it out on the road :) Thank you for watching~
pls cut the cleaning lol
Forgive me lol :)
way way way too low the trucks are too low man
I'll test ride it carefully first :) Thanks
Trucks are too low your gonna messed those up bad. Wrong Deck and wheel combo. Nice try tho.
Thank you for watching :)