How to Check DYSON V11 Vacuum Cleaner Motor with Multimeter?
ฝัง
- เผยแพร่เมื่อ 3 ต.ค. 2024
- How to repair/fix Dyson vacuum cleaner. How to check Dyson V11 vacuum cleaner motor with a multimeter.dyson repair. Dyson fix. In this video, we will guide you through the process of checking the motor of Dyson V11 vacuum cleaner using a multimeter. We will show you how to properly connect a multimeter and measure resistance to make sure the motor is working correctly. This step-by-step tutorial will help you troubleshoot motor problems and make sure your Dyson V11 vacuum cleaner is running smoothly. The Dyson V11 vacuum cleaner motor I show in the video works smoothly. You can measure the motor of your own vacuum cleaner, using the measurements you will see in the video as reference. If you found the video useful, you can like it and write any questions you have in the comments section.
Aliexpress Venlap Official Store
bit.ly/3lGOLjE
Aliexpress VENLAB VM-200M Multimeter sales link
bit.ly/3xt81DL
Aliexpress 2$ discount code
3TB5OID0CWKM
venlab multimeter review video:
• Unlocking the Secrets ...
My other repair videos.
bit.ly/3k8NzRH
My DIY videos.
bit.ly/3j4aOgr
You can contact me via e-mail elektronikatolyem@gmail.com
Do not forget to "like" the video if you like it. You can subscribe by clicking to not to miss new videos / @electronic7979
#repair
#fix
#circuitboardrepair
#electronicscreators
#elektronikkarttamiri
#elektroniktamir
#electronicrepair
#tamir
#electronics
#dyson
#dysonrepair
#dysonfix
#vacuumcleaner
#vacuumcleanerfix
#motor
Aliexpress Venlap Official Store
bit.ly/3lGOLjE
Aliexpress VENLAB VM-200M Multimeter sales link
bit.ly/3xt81DL
Aliexpress 2$ discount code
3TB5OID0CWKM
venlab multimeter review video:
th-cam.com/video/FiJ85YdUPd4/w-d-xo.html
My other repair videos.
bit.ly/3k8NzRH
My DIY videos.
bit.ly/3j4aOgr
Nice meter and soldering 👍
Thank you for your interest and valuable comment, my friend.
Very useful video. Thanks a lot!
Thank you for your interest.
İhtiyacı olana güzel bilgiler eline sağlık.
İlginiz ve değerli yorumunuz için teşekkür ederim.
Nice
thank you
Hola, el motor de mi aspiradora hace un zumbido pero no gira, que puede ser?. Gracias. Muy buen video
Thank you for liking my video. The problem is most likely due to the motor driver MOSFETs on the circuit board.
Muchas gracias
thank you for your interest
Amazing
thank you
On my vacuum V6 accidentally some water got in the motor and now it does not start. I noticed that in the back of the motor is a LED that it is flashing 5 times and if I push the button some kind of small clicks can be heard.
Water in your Dyson V6 vacuum cleaner may have caused short circuits or damage to the motor and electronic components. LED warning lights, especially on Dyson vacuum cleaners, indicate certain types of faults. A rear LED flashing 5 times usually indicates a problem with the motor or battery.
The following problems can occur when the motor is exposed to water:
1. Motor short circuit: If water has seeped into the motor, motor components may short circuit.
2. Control board damage: Electronic control boards may be damaged by water. Motor driver mosfets may have failed.
3. Battery failure: If water has come into contact with the battery, the battery may also be damaged.
4. Trigger mechanism: A clicking sound when the button is pressed can indicate that the motor is being forced to start but the electrical connection is not correct.
What to do:
Wait to dry: If water has only gotten superficially into the vacuum cleaner, waiting for it to dry completely can sometimes solve the problem. You can open the vacuum cleaner and clean the areas that have been in contact with the water.
What did you use to remove the coating on the terminals
I cleaned the coating with isopropyl alcohol. I removed the solder on the motor ends using a vacuum desoldering iron.
Thanks for the video and the infos. I have a Dyson V10 and it seems like it has an issue with the motor or the circuit board. The problem is it only works in the max suction settings and when i try to use it in the firts two settings it just starts and stops in an instant. What dou you think the problem could be? Could the soldering joints be a part of this problem (i say this because the left part of the soldering joints seems a little bit yellowy) or should i renew the solder joints? Thanks in advance.
Merhaba. öncelikle devre kartı üzerindeki tüm lehimleri tazelemenizi tavsiye ederim. Bunun dışında devre kartı üzerindeki mosfetleri ve dirençleri kontrol edebilirsiniz.
добрый день. могли бы назвать маркировку микросхемы U12 .как она в миру зовётся?
Hello my friend.
Unfortunately, I have no knowledge about this integrated circuit. I couldn't find any database on the internet. What was wrong with the cleaner?
Nice TH-cam. Dyson V10 What if only one "boom" sound with full battery light on, but motor do not move ?
Hello. The motor or driver mosfets may be faulty.
@@electronic7979 Thx!
@@jamescheung6004Do you have any progress of fixing you motor? I have the same issue.
@@licysaab finally, I ve replaced it by new motor (Alibaba) and sell the old one at lower price. (I think expertise know how to fix it as many want it). Now, dyson v10 works fine up to now.
Hi Tell me, is there a forced engine shutdown, mine has started to work unstably?
I do not know exactly. There may be a solder crack on the electronic circuit board.
Hi, How can I make sure motor or board witch is broken?
You can check the motor and the materials on the circuit board by measuring them using a multimeter.
Carpet & floor Rollers spin for 1 sec & stop in Eco mode v11 vaccum. Releasing the button & pressing it again does exactly the same. Whats this problem & where to check on the board. Can you make a detailed video about it & share.. thanks
Unfortunately, I have never encountered such a problem before.
Dyson v10 can't work. Symptoms are as follows.
1. When connecting the charger, turn off after turning on 3 blue LEDs.
2. Remove the main body and battery and disassemble the battery. Press the battery switch and turn off 3 LEDs.
3. The battery's own voltage comes out well. Press the switch on the battery and the P+P- voltage comes out for a while and then it doesn't come out.
May I know if it's a battery problem or a body problem?
Thanks for your comment! The symptoms you mentioned usually indicate that the battery may be faulty. If the 3 blue LEDs are on, it means that the battery is not accepting a charge or is faulty. The problems you are experiencing with the battery voltage values also indicate that the battery is not working. First of all, I would recommend replacing your battery. If the problem persists, then there may be a problem with the main body of the device. I hope this information helps!
Solder sucker hangi marka baya iyi çekti?
Merhaba cihazın ismi: xytronic 988d soldering and desoldering station
V11 motor tamirati yaparmisiniz ??
arıza neydi
What if V11 is pulsing, where to check on the motor or pcb? Thanks
You should check the motor driver mosfets and microprocessor.
@electronic7979
do you have the part number for the driver mosfets/ replaceable mosfets that will work on it? Thx
Buenas se me lleno de agua el aspirador dayson v10 hemos cambiado batería y motor y sigue sin funcionar
The electronic circuit board has also failed.
My Dyson V10 Short capacitor I changed but still not working
Motor driver mosfets may be faulty.
Iletisime gecebilirmiyiz ??
elektronikatolyem@gmail.com mail adresinden iletişime geçebiliriz.
👍👋👋
thank you
👍
thank you
Einfach nur sinnlose Zeitverschwendung.
Thank you for your feedback! My goal is to provide useful content that everyone will enjoy. What topics or formats would be more interesting to you? I can use this feedback to make future videos better.
Pointless Video. Showed the motor removed and then replaced. Meter on the motor connections but no resistance values.
Hello. First of all, thank you for your comment. I think you didn't understand the video. The motor you see in the video works smoothly. I have shown the measurement values so that you can reference them on your own vacuum cleaner. subject of the video; Since the internal resistance of a good motor is low, it is normal for it to show zero ohms when measured with a multimeter.
TÜRKÇE dururken başka dil kullanmaya ne gerek var?
Malesef Türkçe içeriklere sponsor gelmiyor. Yakında Türkçe bir kanal açıp aynı içerikleri Türkçe olarak yayınlayacağım.