ฝัง
- เผยแพร่เมื่อ 30 ก.ค. 2024
- This video reviews the Hantek 6022 PC USB Oscilloscope, including how to install, setup, test and calibrate. Thanks for watching.
Video Time Codes for this Video (click to skip directly to a desired section of the Video)
0:00 Introduction to the Hantek 6022 PC USB Oscilloscope
2:12 Obtaining the latest Hantek 6022 PC Oscilloscope Software & Drivers
5:19 Installing the Application software & Drivers for the Hantek 6022 PC Oscilloscope
6:08 Connecting the Hantek 6022 PC Oscilloscope to a PC
6:27 Verifying that the Drivers are Installed for a Hantek 6022 PC Oscilloscope
7:04 Running the Hantek 6022 PC Oscilloscope Application on a PC
7:40 Testing Functionality on a Hantek 6022 PC USB Oscilloscope
8:29 Calibrating the Probes of a Hantek 6022 PC USB Oscilloscope
Note: I have NOT received any sponsorship or commission for using the products shown in this video.
As an Amazon Associate I earn from qualifying purchases, when these links are used:
Hantek 6022BL 48MSa/s 16CH PC USB Digital Storage Oscilloscope Logic Analyzer
amzn.to/3zsHfh1
Signal Generator Kit, XR2206 Precise Function Signal Generator Frequency Module Signal Generator DIY Kit Sine Triangle Square Output Adjustable 1Hz-1MHz, 9-12V DC Input (1)
amzn.to/3MuT2hC
Please consider subscribing to my Channel, and hitting ‘Like’, if you find this video useful. I will endeavor to answer any and all questions posted for any of my videos as quickly as I possibly can.
If you have any questions or suggestions, I can be reached on Email at: PE4Doers@gmail.com , or on Twitter @PE4Doers, or Instagram @PE4Doers. Or on a more professional basis, through LinkedIn at: / davidrrivera
#Hantek #Oscilloscope #PE4Doers
Retired Biomedical Engineer here. I've been tinkering with small robots. Missed not having an Oscop. Thanks for the very direct and to the point video. I subscribed.
Thanks Bill. I appreciate it.
By the way, I just bought a higher-end O-Scope (non-PC dependent) that I will soon be opening and trying. I miss having a good one for my Electronic Hobby stuff (I lent the one I had to a co-worker a few years ago, that got laid-off and I never heard from him again).
This is the first video I’ve seen of yours. Beautifully clear, covering all the basics without being patronising. I'm only just learning my way round mine despite having had it for a few months.
Thank you so much for this great comment 🙂
I am TH-cam videos as a legacy for my future descendants (not on particular tech, but on the tech methods used). If I can also provide value to those who take the time to watch, that could help both of us in the shorter-term.
A great video. Short and succinct explaining all the basics in a very clear and concise manner. Thank you so much for sharing your knowledge with us.
You are very welcome 🙂
Great Idea with a signal generator. Just ordered mine through your link. Appreciate the great clear video as I'm looking to learn on mine as well. Cheers and subscribed!
good luck.
I would like to thank you for this video. I was having trouble with the driver installation. The wizard didn't start and I had to install it manually. Thanks.
You are very welcome Sir 🙂
Thank you for the video, as a beginner it really helped a lot. I'm now trying to make the digital analyzer to work, is there any major configuration difference to the oscilloscope?
You will need to add the digital analyzer probes. Did yours come with a set of those? I think it depends on which model you purchased.
I've been using it for a couple of weeks now using OpenHantek software on my linux machine. I find it quite hard to display charging and discharging capacitors due to problems with sampling rate and the div/s. Overall, has an average performance for the general observations of the circuits but has a problem with specific measurements.
I agree. It is not a high quality O-Scope by any stretch of the imagination. It does barely more than the $40 kit scopes sold by a couple of companies on the other side of the World (at least if you are in North America). It can only get you in the City (not even the Bali-Park) of Engineering detail that a lot of people need.
That is why, very soon I will showing a quality 4-channel Digital O-Scope that I plan on using for any 'serious' Engineering work, that is not dependent on a PC and provided PC software.
Thanks you for your well thought-out comment.🙂
Hi - follow up question... do you know if it's possible to connect a current clamp to the Hantek 6022? I was looking to pair a UNI-T UT210D clamp to whatever oscop I go for - many thanks
To be honest, I am not really sure. When I last used a current clamp it was on a more much more sophisticated O-Scope.
Thanks for a great vid. The driver never showed for me under device manager. But it showed under settings->devices->Bluetooth and other devices but only when the unit was connected
You are very welcome. That is interesting, does everything work OK?
Hello, good video, I have the 6022bl, can you describe the calibration utility software? Greetings
The utility is part of the actual software that you need to use with the unit. It is one of the menu items that I show in this video.
Hello everybody👋
I'm reading the Hantek6022BE user manual, it's not indicated the maximum applicable voltage between the probe and the ground clamp.
I would like to show to my students dephases in resistive, inductive and capacitive circuits, in 230VAC. For current measurement, this is not a problem. But for the 230V voltage, I'm afraid to burn out the oscilloscope...
The probes should be able to handle that with a problem, They provide internal isolation up to several hundred volts.
Having problems with install on a Win11, I had previously installed this software on a Win10 computer. Not sure if I should just delete the drivers in the WIN10 folder and add the others...
I have not tried it on Win 11 (yet), but it sounds like you have a workable idea there. Let me know how it goes.
Thanks for the walkthrough. Do both USB ports need to be plugged into the PC? The laptop I want to use only has a single USB outlet - could I use an external USB power source for the second plug? Regards
The red one is for Power. You could use a USB power adapter for that one.
@@PE4Doers Thank you
@@1chrisandrew1You are very welcome. Good luck.
You can use only 1 usb connector, it depend on where do you plug in the oscilloscope. At certain speeds the USB 3 ports can provide 0.9 A, personally my PC has a USB port with a power of 1A
@@badwolf4469 Thanks for the information. I did try that when I first bought the unit. however I was concerned that the current drawn through the single connector might be an issue.
Following your instructions about how to install the Hantech 6022 USB device the installation on my Win 10 desktop PC worked like a charm. But the same was not the case when I tried to repeat the success on my laptop.
The laptop computer found the driver when the Hantech 6022 was connected, but in addition to the text Hantek60022BE DRIVER 2 there appeared a yellow triangle at the beginning of this text. Clicking on this text a new window popped up telling me that Windows could not approve the signature of the driver for my laptop computer.
Some alternative possible reasons for this were given, but I am at a complete loss as to what to do next. It would be greatly appreciated if you here could give me a helping hand.
I've been struggling with this one most of the day. Go to Device Mgr then the driver and update it manually by navigating to the folder containing the downloaded driver
Many people have had problems installing this unit, which seem to be related to the particular Windows Build they are using. What I always do is update my Windows to the latest build when I encounter issues such as this.
Brilliant Video :)) Now you are ready to test the Corsair CX650 and claim the Warranty they try to withhold from you. Got for it and win :))
Yes, my plan right now is to make that the topic of my next Live Stream (taking either 6/18 or 6/19), however I want to finish part of my new VM Server build first (since I have parts strewn all over my studio right now).
That build should be VERY interesting (having test populated and tested the motherboard, CPU, Memory, SSD, 360 deg AIO, and PSU), since it is Very fast 🙂
@@PE4Doers I can not wait :)) you know It Now I am really excited :))
@@KathrinHausermann I just need to get some garlic to keep the Live Stream daemons away.
thank you indian guy for sharing your wisdom with us, you have helped me so much
btw what does this button exactly do?
you are very welcome Sir. Good luck with your Oscilloscope.
I have the drivers but seems like they're only supported for windows. Is there any way i can use this in my macbook?
I really don't think they would work on a MAC. Maybe you can reach out to Hantek to see if they have any. Also, have you checked out the drivers on their Website?
@@PE4Doers I've tried to install the drivers but it's not working. But I've seen videos on installing Openhantek software on mac
@@Depta25 Sorry I could not assist ☹
Does it have UART, SPI, IIC decoding function?
I'm not 100% sure, however I do not recall seeing those options when I was using that scope.
Hi, Can you please show how to get the Hantek 6022 work with Windows 11 ? I have it running on Windows 10, but can't get it to work on Windows 11.
Mr. Timmer, I will take a look at testing that and possibly creating a quick follow-up video showing the results. I have not tried the Hantek O-Scope on Windows 11, however I've had trouble with the drivers for other USB devices, so that is likely at the root of the problem.
@@PE4Doers Hi PE4Doers, any luck to get the Hantek 6022 working on Win 11 ?
@@erichtimmer Thanks so much for reminding me. I will try that again in the next few days since I plan on making a video specifically for O-Scopes. I now have three of them with the Hantek being in the middle (not counting one I build as a kit 15-years ago, that I lent to a co-worker who quit a week later and my Scope never to be seen again ).
@@PE4Doers Hi PE4Doers, have you managed to get it to work with Windows 11 ?
@@erichtimmer No, I have not. I just checked a few days ago looking for updated drivers but I do not see any. What I did however is buy a 4-Channel oscilloscope that can output to a PC. I will be doing that review in the next couple of weeks.
Please send hantek 6022 bl soft
You need to visit their Website for the proper version. I have seen it updated three times.
WAITING FOR HOW TO MEASURE AC VOLAGE USING THIS OSCILLOSCOPE
You should avoid all Caps, since that causes TH-cam to put the comment in a hold bucked for a few days.
You measure by getting the full AC Sine Wave centered on the screen, then looking at both the resolution you set on the scope then measure the Peak-to-Peak (Vp2p) height. Then you use the formula: Vrms=Vp2p*0.353
Some more advanced scopes can be set to display that on the corner of the screen. I do not believe this one has that option however.
i can't install in windown 11
There are workarounds for getting past the initial testing that the Windows installer uses. I show that in one of my ESXi videos.
Nice Video, but...
But you are talking about an OSCILLOSCOPE (which is the 6022BE), but you are installing the software and the driver for an LOGIC-ANALYZER (which is the 6022BL)...
I bought the OSCILLOSCOPE, and followed your instructions... and it did not work! Because I installed the LOGIC-ANALYZER-software for an OSCILLOSCOPE!
I repeated the same steps, but this time I choosed the 6022BE, and it was sucessfull!
BUT:
I bought this oscilloscope, because of the very, very slow timebase (up tp 5000 sec/div). But that value is bullshit!
This oscilloscope is not sampling slower that 1 sec/div!!!
There are 10 div on the X-axis, and every slower measurement (2, 5 or 1000 sec/div) needs 10 seconds!
The 1 kHz signal output has 50 % duty-cycle, that is 500 µsec high and 500 µsec low. And when I look to the recorded file, I can see 50 entries a voltage around 2 Volt, and 50 entries around 0 volt. With a choodes timebase of 10 sec/div! Or 5000 sev/div! Every value greater/equal 1 sec/div gives exactly the same result!
In other words: This oscilloscope makes samples not slower that 10 microseconds per sample... And that is 5 times faster than my 'normal' oscilloscope! Well, normally 'faster' means 'better'... but my idea was to record very, very slow signals over a time periode of several hours... But this oscilloscope is not able to do this!
That oscilloscope is very low-end - sort of a 'starter' unit. I have not used it as Logic Analyzer as of yet.
I bought a 4-Channel Siglent Scope a few months back that was on sale. That is a True production digital scope that I will probably do a review of later this summer.
poor reviews for this product. I hope it lasts
I saw a few of those. I actually had it for nearly a year before I created this review. When I first tried to install the S/W it was nearly impossible and took a LOT of effort (with the Driver part of the install). I decided to try it again with the fresh load of Windows 10 shown in this video and they clearly fixed the problem I was have, and probably what led to so many bad reviews and customer ratings.
@@PE4Doers Too bad when a software issue brings down a good product. But at Least it got fixed by Hantek.
@@KathrinHausermann Kathrin, I think it has been fixed. It was 'usable' previously after either hours to trial and Error (or a call to Hantek's Support line), but now the installation of the S/W is fairly straight forward.
@@PE4Doers Perfect :)) As It should be :))
@@KathrinHausermann I agree