Nice going, next time around, paint all the wood your favorite color, use wooden plugs instead of screws and paint the grills, then sell these units for $500 plus. People will appreciate the hours it takes to build them plus the actual hardware. Good job, sir.
Hola, muy buen proyecto, buen trabajo, si suavizas el interior del bafle con algún material como lana de vidrio, alfombra suave, fieltro, o cualquier aislante acústico, los bajos disminuirán de intensidad pero mejorarían en profundidad y calidad Saludos
Quite dont know what's the point of such complicated enclosure, where subwoofer part has very low volume and sat speakers are sunk, which quite destroys sound from mid to top highs and have complicated back end which doesnt help to enhace bass at all, because it is short..
That is the reason why loudspeaker housings have to be calculated so that not every x random larry can come running to build a loudspeaker that just sounds garbage. in spite of all that, respect for work
Loudspeaker box needs to be calculated? Come on.. You just need to have pen and paper to draw box that you like, you must have tools and materials to build it, and few speakers to make some noise. Amp? Anything that can produce that noise. I forgot Bluetooth, sorry. You first put speakers inside, after that you make new holes and use sand papers. Speakers work better if you fill them up with tiny wood particles and dust. Really, calculations? Who needs those, come on??? PS I hope I was not over-sarcastic.. Sorry..
Yep I’ve wasted tons of wood when young. Now I’ve made a series of medium builds with actual plans using the same components. One of them just sounds. The other sounds amazing.
@@buckfutter99 We can't change acoustic science - if it would be so easy to make loudspeakers, everyone would make perfect ones. I am glad to see that your newer projects work better 👍.
@prota gonist: Thanks mate… glad I’m not the only one to question this build. 😅😅 I mean, a front loaded bass horn with about 20cm horn length?!? And additional passive radiator on the back?? I thought: wow… whether he is a total genius and I don’t get the concept and/or calculations this is based on. Or: the builder doesn’t have a clue what he is actually doing. Also, i guess, the fullrange part (front speakers) will only produce giant exaggerations and deeeeeep valleys of deletions, but nothing close to a good sound.
Cặp onkyo không phải loa toàn dải nên cần phải có mạch phân tần và 2 củ trép nữa mới hay tí tách. Củ sub của loa Apple công suất khá nhỏ nên dùng 2 củ đấu // nghe phê hơn. Làm kiểu sub hầm này âm bass được cái rất sâu nhưng không lớn
Phía trước chỉ chắn 1 chút lưới mỏng như kia, âm trầm sẽ phát tán và bị loãng, kín hơn chút âm nhỏ hơn nhưng sẽ uy lực. Loa này nge dj thôi chứ nge nhạc vàng thì lại ối zoi ơi
A passive "usually" should be 2x the cone space as the main driver(s) for best output I believe. If that is a passive, I would be interested in how the driver and passive were selected.
@@sergioaumanbarnes6950 Yeah but what the purpose to make subwoofer only on portable Bluetooth speaker? 😅 We aslo need vocal & high frequency. Except if you want to use it as home theater subwoofer or audio system.
Đề nghị bác đầu tư mấy con ốc khác khi bắt loa nha :) Bác làm thế nếu nghe kỹ gần nó có tiếng hơi phè phè. Sẽ hơi thiếu treble Công nhận bác nhiều đồ chơi thật :)
I still think that's not DIY but why vote negative? 31 negative votes? That channel is to enjoy watching (not DIY) but idk how that amazing work can get negative votes.
what is the device called that you used to make holes and circles? How did you make perfect circles without even tracing a circle first with a pencil?!
Thanks for your comment! Did you know about ZSOUND? We offer top-notch audio gear like Line Arrays, Subwoofers, and more. Need gear or info? Just ask！25 www.zsoundpro.com
Работа произведена большая , но явно слышен гул , вызванный переотражением звуковых волн, внутренние панели надо обклеить тонким войлоком или чем то подобным, что бы минимизировать переотражение , и естественно ни о каком strong bass речь не идёт, объём и конструкция не позволяет, мид бас порядка 80-90Hz. Но ведь всё делается ради контента и лайков , а значит звук тут не главное!
Честно говоря звук как из ведра. вместо онкио динамиков можно поставить 13-14 см автомобильные 3х палосники и звук становится шикарным. я сам так сделал из бывшей колонки электроника 25ас128 с пассивным излучателем .
My trading strategy
www.scalpxau.pro/
Nice going, next time around, paint all the wood your favorite color, use wooden plugs instead of screws and paint the grills, then sell these units for $500 plus. People will appreciate the hours it takes to build them plus the actual hardware. Good job, sir.
Exelente trabajo ❤
Hola, muy buen proyecto, buen trabajo, si suavizas el interior del bafle con algún material como lana de vidrio, alfombra suave, fieltro, o cualquier aislante acústico, los bajos disminuirán de intensidad pero mejorarían en profundidad y calidad
Saludos
Quite dont know what's the point of such complicated enclosure, where subwoofer part has very low volume and sat speakers are sunk, which quite destroys sound from mid to top highs and have complicated back end which doesnt help to enhace bass at all, because it is short..
Simply great build....quality work...Kudos
Love from Bangladesh 🌹🇧🇩❤️
Thank you😊
Sir paras 4440ic implifier pr konsa suwoofer speaker chleynga
Aapney jo es video my jo bnaya o 3 subwoofer ak sath chal skeyngy kya plies btao sir 🙏🙏
Todo está bien.. el problema es si se llegará a quemar una de esas bocinas para remplazarla o repararla se tendria q desarmar el cajón
un grande!!! , se devi cambiare un woofer che fai ? lo butti nel camino?
That is the reason why loudspeaker housings have to be calculated so that not every x random larry can come running to build a loudspeaker that just sounds garbage. in spite of all that, respect for work
Thank you
Loudspeaker box needs to be calculated? Come on.. You just need to have pen and paper to draw box that you like, you must have tools and materials to build it, and few speakers to make some noise. Amp? Anything that can produce that noise. I forgot Bluetooth, sorry. You first put speakers inside, after that you make new holes and use sand papers. Speakers work better if you fill them up with tiny wood particles and dust.
Really, calculations? Who needs those, come on???
PS I hope I was not over-sarcastic.. Sorry..
Yep I’ve wasted tons of wood when young. Now I’ve made a series of medium builds with actual plans using the same components. One of them just sounds. The other sounds amazing.
@@buckfutter99 We can't change acoustic science - if it would be so easy to make loudspeakers, everyone would make perfect ones. I am glad to see that your newer projects work better 👍.
@prota gonist: Thanks mate… glad I’m not the only one to question this build. 😅😅
I mean, a front loaded bass horn with about 20cm horn length?!? And additional passive radiator on the back?? I thought: wow… whether he is a total genius and I don’t get the concept and/or calculations this is based on. Or: the builder doesn’t have a clue what he is actually doing.
Also, i guess, the fullrange part (front speakers) will only produce giant exaggerations and deeeeeep valleys of deletions, but nothing close to a good sound.
Very cool, I dig the unique grilles.
Cặp onkyo không phải loa toàn dải nên cần phải có mạch phân tần và 2 củ trép nữa mới hay tí tách. Củ sub của loa Apple công suất khá nhỏ nên dùng 2 củ đấu // nghe phê hơn. Làm kiểu sub hầm này âm bass được cái rất sâu nhưng không lớn
Sub cộng hưởng mà bạn??? 2 loa vệ tinh ma kiểu đường hầm
Sud hầm đánh rất sâu và lực nhé. Lực hơn sud mặt. Chỉ có cái ù rền nghe trong nhà hơi nhức đầu
Very awesone my friends..success for you
Phía trước chỉ chắn 1 chút lưới mỏng như kia, âm trầm sẽ phát tán và bị loãng, kín hơn chút âm nhỏ hơn nhưng sẽ uy lực.
Loa này nge dj thôi chứ nge nhạc vàng thì lại ối zoi ơi
Very nice, but you mounted your JBL speaker crooked, but sounds fantastic 👍
It sounds like trash
What are materials did you used, so we can also a symbol that type of speaker
I guess it's well protected from damage, but npt the best choice of drivers or design for sound quality.
Call me a Pessimist! but if a Speaker go's BAD how do I replace it without destroying the enclosure?
ทำหูจับด้านข้าง 2 ข้างสวยกว่า หรือเจาะทำที่จับ
WOWOWOWOOW HANEP SA BANGES NG GAWA MO PRE PWEDE NA PALA MAG PAGAWA AYON SA GUSTO KONG DESIGH? NICE ONE BROD
Mantap 👍👍 from Indonesia 🇲🇨
Ku kira hanya aku yang nonton ini😥
A passive "usually" should be 2x the cone space as the main driver(s) for best output I believe. If that is a passive, I would be interested in how the driver and passive were selected.
Супер!!! Руки золотые у мастера! Молодец, крутой Вуфер!!!
Really Super Master,
RealIy I want it but I don't have money.
Thank you
Keren... Buat... Speaker berpa inch bang..?
Sound is good enough for this little amplifier💚 good video
So Nice . I like it
What's that in the back ( JBL ) ? Vibrating
What do you call that thing ?
Genial trabajo solo serìa perfecto con un par de drivers o twiters.
Vaii science Exevitions kaha hota hay ?Mere pas project hay par projects kaha dikhau pata nehi
Keren pokoknamah, mantab ieumh, TOP
Kren bro, mgkn kl pegangannya di samping bs lbh elegan, Krn ini hanya saran aja, tp kereeeeeen....👍👍👍👍
Popping that brad nail in like that and using it as the center was pretty slick. Why haven’t I ever thought of that moments
Nice deep bass 👌
😂😂😂😂😂
Good job cheers from Poland
Look good and sounds great but hard to replace in case burning out for side speakers
add a some ribbon twitters for more highs. Nice build, good job!
Great Design sounds great
Cũng chỉ đến thế . Nếu loa hỏng phải thay thì phá tan cái thùng ....!
em có làm và đấu được 3 chế chế độ vang echo digital dvot không
Máy móc đầy đủ thế này mà không hay mới là lạ 👍😀
New here, first thought - this guy has probably built a few boxes before. =-P
xịn vc. loa có bán không a
i think that if you add 2 twitters bridged to the mids, it would be even better
Nunca vai dar defeito , e quando eu precisar trocar um alto falante desses ?
Just missing syncronized leds to intensify the sound beyond to give more emotion when you listening them. Congratulations it was a good event.
Add tweeter for high frequency production
Sounds like it needs something for 800hz and higher
It's mention there in the caption "subwoofer" 😏
@@sergioaumanbarnes6950 Yeah but what the purpose to make subwoofer only on portable Bluetooth speaker? 😅 We aslo need vocal & high frequency. Except if you want to use it as home theater subwoofer or audio system.
Excuse me, this leather handle is very beautiful! What's the name of it?
Where did you buy this leather handle? Thank you!😍
Good sound👏 i love this chanel,❤❤
Time: 14:42: Clear cable, observe cheating connection, all connections must be as far into the blue sockets as possible, some stay on & fall out!
Hết tầm bao tiền để hoàn thành con loa này ha ban
Интересно, автор делает какие- нибудь расчёты для хорошего звука или только бы красиво было.
That CNC crash was scary... glad it didn't do any damage to the head.
For how many sizes of the bok and the size of the corners in it please answer.... 😇😇😇😇
Salam dari Indonesia mantap.....
Amazing 😍 bro 😘🇧🇩🇧🇩🇧🇩🇧🇩
Only 3 li iron battery and protection ??? Minimum 6amp 24 v need
Đề nghị bác đầu tư mấy con ốc khác khi bắt loa nha :)
Bác làm thế nếu nghe kỹ gần nó có tiếng hơi phè phè. Sẽ hơi thiếu treble
Công nhận bác nhiều đồ chơi thật :)
Astig pagkano po inabot nyaan lahat sir?
Mas king make speker, piro kiro2 hargane...
Mantabbbsssss how much
That is way better indeed.
I still think that's not DIY but why vote negative? 31 negative votes? That channel is to enjoy watching (not DIY) but idk how that amazing work can get negative votes.
what is the device called that you used to make holes and circles? How did you make perfect circles without even tracing a circle first with a pencil?!
It's computer operated "Wood CNC machine"
I don't see the list of items and materials you have used
Hello you
I have 2 question. Why dont you write materials you use? How do l subscribe when l dont know to do with it?
Thanks for your comment! Did you know about ZSOUND? We offer top-notch audio gear like Line Arrays, Subwoofers, and more. Need gear or info? Just ask！25
www.zsoundpro.com
Buen video educativo, sirve tambien para fabricarse uno personalmente
un gran trabajo de mano de obra amigo que pena que no tengas un poco de mejor gusto,
al final hiciste una cesta de fruta
Hello you
Работа произведена большая , но явно слышен гул , вызванный переотражением звуковых волн, внутренние панели надо обклеить тонким войлоком или чем то подобным, что бы минимизировать переотражение , и естественно ни о каком strong bass речь не идёт, объём и конструкция не позволяет, мид бас порядка 80-90Hz. Но ведь всё делается ради контента и лайков , а значит звук тут не главное!
Честно говоря звук как из ведра. вместо онкио динамиков можно поставить 13-14 см автомобильные 3х палосники и звук становится шикарным. я сам так сделал из бывшей колонки электроника 25ас128 с пассивным излучателем .
A mua mạch này voi loa ở đâu vậy àk???
Hasil yang luar biasa mas bro, salam sukses dr Merapi teknik
Do you have a plan sir.,
From Thailand 😘😘😘
Hi, 😁 this sounds great!!
Is it for sale?
He would have to pay ME to dispose of it.
Hello. I am Ravindra from India.
Where can I get cad data, speakers and amplifier boards ??
Very good I like🎉🎉❤❤
Excelente trabajo 👍
Essa caixa de som portátil com Bluetooth de MDF deve ser meu né caboclo 🤠
Ad ơi xin link mua linh kiện đi.mỗi lần ad làm điều cho link liên kiện mua hàng sẽ rất ok hơn.
Nice paced video. Good food for thought, for others with something similar in mind.
Когда дело дошло до пайки, у меня инфаркт чуть не случился. Радиолюбители поймут.
у меня он случился, когда я увидел что динамики повернуты противофазно, нужно было повернуть их лицом на панель
@@МистерТрололо-ж9й не обращайте внимания. это контент. такой шняги здесь полно.
good job.. love from indonesia
Good2 froom Indonesia
Sama
Raw material kaha se mila
Wow very very God 👍👍
Do u sell ur sub woofer sound system......ru frm india.....if yes how much cost......
thay 3 miếng meca thành vải thì đẹp hơn nhiều ad a
Lek tuku salon e nandi ? Salon tanpa box
Pin 3s 1p làm sao hết công suất mạch được bạn???
How about charging port for the batteries
Nên đổi các dạng loa khác đi ad ơi, loa trầm nhiều quá gây nhàm chán
И сколько он работает на акумуляторах.., 30 минут..?
Boss magkano ung pang tricycle gayang yari at saan gawa yan oh anong probensya
Sử dụng mạch gì vậy ad ơi
Bên a Có nhận đóng loa không ạ
What module do you use, sir?
keren kak
klo D jual brp kak
Ну с такими инструментами и станками я сам любой бумбокс сбацаю🤣🤣🤣
Hello friend. How can I get the materials list of speaker, amplifier card, etc.
Mạch công suất bạn mua ở đâu bạn
Anh có bán bộ này ko em nghe thích quá
Spekerny pake merk apa kak