Nice job!! Not much dialogue, but good nonetheless. I'm trying to determine how much wood you used in the making of these boards, and how much it would take to make just one board? Some of the species used in this video, especially the black walnut is premium priced where I live. They don't give it away, that's for sure! It would cost me about $100 dollars in wood to make a board like that (I'm guessing), and to sell it to the general public, nobody would even give me the price for just the materials. People are so fickle. Keep up the good work. Enjoy watching your techniques. Cheers!
What sizes do you rip the boards to? 1.5 in, 2 in, etc how many feet if each board do you start out with? are any plans available? How thick are the boards are you starting with. Thanks
Coppied your method and mine turned out pretty fucking epic. One segments about a mm out of allignment wich i missed at final glue up but overall not bad
Hi 👋 Beautiful job you must be proud of making those, I would’ve thought that they would sell very well, Not sure whether you can buy them in Canada or in the states but there is a device that you could set in the side of the chopping boards for sharpening knives on , The device can sharpen metal knives and ceramic knives, it is made by A company called crushgrind in Denmark I do believe, They make ceramic pepper mill grind mechanism , Keep up the great work, And stay safe and wear a air fed mask, Retired English gentleman specialist joiner cabinet maker. Phil from the moulin France.
Great work needless to say. I just finished your chevron pattern board and want to do this also. I notice you don't seem to have an issue with tearout when cross cutting the pieces. Or is it taken care of during the final sanding?
Gorgeous! If you don't mind a few questions, to what grit do you go on the drumsander and do you do any other sanding? Do you finish at about 1.25 thick? I just subscribed.
I use the drum sander after each glue up and on the drum sander first drum is 80 grit and the second one is 120 grit and for making end grain cutting board it’s so a time saver but yeah after the drum sander I sand the board from 120 grit up to 600 grit When you make the last cut to make it end grain it’s up to you for the thickness of the board but I like to make around 1 1/2 inches my board
Beau boulot mais je suis un peu dubitatif concernant l'aubier qui reste dans une partie des planches..... Dommage, pour moi cela nuit un peu à l'esthétique.... oui je reconnais, je chipote un peu 😂😂
He has a lot to learn. The selection of some of the pieces of wood is terrible. Also, don't put your logo on the face of the board, always underneath. Take the time to sit back and look at the pieces of wood, before gluing together. This is what makes the difference between a okay/good product, and an amazing one.
Customer was super happy I sell over 20 board in two week 350$ à board not bad for my first time I have make this model I’m not a professional and I’m more a woodturner what is the problem with the choice of the species And I like to put my logo on the board so everybody can see it 😉
@@birdiebuster Lol. Okay. Now I can see you have a fragile ego. If you don't want to improve and make the best possible product on the planet, that's on you. Winners always look to improve, even if its 1% at a time. Everything I have said, you have tried to deflect. Ask yourself why?
DaVinci of woodwork. Absolutely beautiful
Awesome job. Truly enjoyed watching you work. Really enjoyed the fact that you didn't speak and explain every little thing you did. Thank you.
I don’t like talking Haha
Thanks for watching
Thanks!
Absolutely stunning. One could get lost in that cutting board.
Simple but mesmerising and stunningly beautiful....
Very simple
Only one word: WOOOOW!
It's a great and fantastic idea! Lights and shadows in a perfect harmony! Congrats, Villy!
Beautiful! You have every right to be proud of them. True craftsmanship!
Another great job. A unique piece, lots of style and lots of creativity ... Thanks for sharing.
Wow really great work here. Love the pattern
Greetings, thanks for the video. I would have liked to see how much you cut the wood at 45 and the square one.
The illusion is awesome...what a fantastic idea! Loved every minute of it 😁👍❤
Complimenti, hai fatto un lavoro bellissimo..
Absolutely amazing, beautiful, stunning, wow. Do you get my point. Great work 👏
Thanks you very much
Some powerful stuff. Awesome work
You've got one hell of a shop my friend,I'm very jealous. Great board also
Wow nice work!
Just watching the process
Its so Soothing & Satisfying 👍 :
They are absolutely beautiful. So much work but fabulous result.
Goodness me they are beautiful. Stay safe.
jaw dropping!! amazing!! good job bud!!
Really Really a good job done on it ! Congrats and regards from Brazil
Love the effects. Should have explained the woods, cuts and angles. I making one from J.E. Jaeger wood turner video as he explains everything
Beautiful Villey.
Great! This is art! Well done!
Que trabalho excepcional! Parabéns...
So cool, tedious but beautiful!
Me imagino que costará mucho ya que uso mucha madera para hacer algo tan hermoso
Felicidades!!!!
Really nice optical illusion. 👍😁🇨🇱🇺🇸
Gorgeous!!!
Nicely done 👍👍👍Thanks for sharing
Mesmerising, it would take me a month of Sundays to figure out how the various pieces of wood should fit together.
Hi Villy they are extraordinarily stunning. The 3D effect changes at different angles.
Brilliant video Villy.
Take care.
Cheers, Huw
Fantastic work
Very beautiful pieces ✌💪
Just recently found your channel. Another amazing piece! Great work!
Do you happen to sale plans for any of your projects?
It looks beautiful and you did an excellent job making it as well!!!!
Enjoyed the video and I gave it a Thumbs Up
Those are so cool!!
Good job, Looking from 🇲🇽, greetings👍
Beautiful!
Very nice!
FIRE! Dude, is that your woodshop? Jelly.
Trippy Man 🤯🤯🤯🤯🤯🤯🤯
very nice
Felicitaciones por tu buen trabajo 🇵🇪
Muito bom meu amigo . Parabéns , obrigado por postar o vídeo .
👍🏻👍🏻‼ Fantastic, LOVE IT ‼💖💖💖💖💖
Très bon travail bravo
Villy saya suka sekali dengan ide dan kreasi anda, bagaiman jika kita bekerja sama?😃
The equipment in your shop is badass!!! shop envy !
Do you sell plans
Gracias, exelente video!
Nice job!! Not much dialogue, but good nonetheless. I'm trying to determine how much wood you used in the making of these boards, and how much it would take to make just one board? Some of the species used in this video, especially the black walnut is premium priced where I live. They don't give it away, that's for sure! It would cost me about $100 dollars in wood to make a board like that (I'm guessing), and to sell it to the general public, nobody would even give me the price for just the materials. People are so fickle.
Keep up the good work. Enjoy watching your techniques. Cheers!
Maravilloso!!
I like to know how much it cost to buy one 3D cutting board
What sizes do you rip the boards to? 1.5 in, 2 in, etc how many feet if each board do you start out with? are any plans available? How thick are the boards are you starting with. Thanks
I value your work, but it is the most difficult path to take, still thank you for sharing.
What size strips did you use?
Wonderful! Which kind of wood did you used?
Добрый день. А какую древесину Вы используете для изготовления? И каким клеем клеить доски? Работа суппер!
Can you imagine the amount of board ft needed for this one cutting board.
Yes I can
Well worth it though. Beautiful piece.@@birdiebuster
Nice
Coppied your method and mine turned out pretty fucking epic. One segments about a mm out of allignment wich i missed at final glue up but overall not bad
Nice work, Those are great. How much do those two boards sell for? Thanks
It’s 350 for the big one and 220$ for the smaller
Beautiful board. Really a piece of art. Are the squares 1" × 1"?
Excelent
What are the wood species you used?
Black walnut , maple and cherry
Do you know how many board feet of each species it took to make those two boards?
Thanks for the video. Are those boards 1 or 2 inches thick, as in their original state before you cut anything? 6 or 8 inches wide?
Which oil have you use? Thanks
Oil with an conditioner in it
Como me puedo comunicar con usted para poder comprar unas tablas?
Do u have website with plans for this?
Hi 👋 Beautiful job you must be proud of making those, I would’ve thought that they would sell very well, Not sure whether you can buy them in Canada or in the states but there is a device that you could set in the side of the chopping boards for sharpening knives on , The device can sharpen metal knives and ceramic knives, it is made by A company called crushgrind in Denmark I do believe, They make ceramic pepper mill grind mechanism , Keep up the great work, And stay safe and wear a air fed mask, Retired English gentleman specialist joiner cabinet maker.
Phil from the moulin France.
xD sponge bob, nice work i like it
Great work needless to say. I just finished your chevron pattern board and want to do this also.
I notice you don't seem to have an issue with tearout when cross cutting the pieces. Or is it taken care of during the final sanding?
No tear out with a good and sharp blade
That's a hell of a shop you have. Is there a video of how it came together?
What was the thickness of the wood before milling to size?
Gorgeous! If you don't mind a few questions, to what grit do you go on the drumsander and do you do any other sanding? Do you finish at about 1.25 thick? I just subscribed.
I use the drum sander after each glue up and on the drum sander first drum is 80 grit and the second one is 120 grit and for making end grain cutting board it’s so a time saver but yeah after the drum sander I sand the board from 120 grit up to 600 grit
When you make the last cut to make it end grain it’s up to you for the thickness of the board but I like to make around 1 1/2 inches my board
@@birdiebuster Thank you!
@@joshblumenthal4873 your welcome brother
Beau boulot mais je suis un peu dubitatif concernant l'aubier qui reste dans une partie des planches.....
Dommage, pour moi cela nuit un peu à l'esthétique.... oui je reconnais, je chipote un peu 😂😂
Is it for sale ❓😎
Yes you can buy a board if you want email me at: villywoodpecker@gmail.com
Or add me on Facebook: villy Vinny @JimDee
What kind of tape did you use for "clamping"?
Kind of duck tape
So you're going to just skip over the 30 minutes of sanding!! Amazing on that build.
More 2 hour of sanding hahaha 😝
👏🏻👏🏻👏🏻👏🏻👍👍👍👍😋
Nico board, but not de best way to make it. Ik like the way MTM wood did it, and so do I.
He has a lot to learn.
The selection of some of the pieces of wood is terrible.
Also, don't put your logo on the face of the board, always underneath.
Take the time to sit back and look at the pieces of wood, before gluing together. This is what makes the difference between a okay/good product, and an amazing one.
Customer was super happy I sell over 20 board in two week 350$ à board not bad for my first time I have make this model I’m not a professional and I’m more a woodturner what is the problem with the choice of the species
And I like to put my logo on the board so everybody can see it 😉
@@birdiebuster Lol. Okay. Now I can see you have a fragile ego.
If you don't want to improve and make the best possible product on the planet, that's on you.
Winners always look to improve, even if its 1% at a time.
Everything I have said, you have tried to deflect. Ask yourself why?
@@vicconstruction9126 it was my first cutting board like this sorry
Worst "how to" - no information, no instruction, no detail. Just random shots of woodworking operations.
I like it. Don’t need a how to when he videos it.
What width did you rip the cherry and walnut to? Multiple others have asked this but haven’t gotten an answer
1 1/2 if I remember
@@birdiebuster I ended up cutting them at 1.75” and had to trim them down a bit, so 1.5” sounds right. Thank you for the reply!
Gorgeous!!!!